International Journal of Plasticity Short Title: Int. J. Plast. Publisher: Elsevier Science Ltd. (Pergamon), New York, NY ISSN: 0749-6419 Online: http://www.sciencedirect.com/science/journal/07496419 Comments: Journal; No longer indexed Documents Indexed: 1,386 Publications (1985–2011) References Indexed: 333 Publications with 18,365 References. all top 5 Latest Issues 27, No. 12 (2011) 27, No. 11 (2011) 27, No. 10 (2011) 27, No. 9 (2011) 27, No. 8 (2011) 27, No. 7 (2011) 27, No. 6 (2011) 27, No. 5 (2011) 27, No. 4 (2011) 27, No. 3 (2011) 26, No. 12 (2010) 26, No. 11 (2010) 26, No. 10 (2010) 26, No. 9 (2010) 26, No. 8 (2010) 26, No. 7 (2010) 26, No. 6 (2010) 26, No. 5 (2010) 26, No. 4 (2010) 26, No. 3 (2010) 26, No. 2 (2010) 26, No. 1 (2010) 25, No. 9 (2009) 25, No. 8 (2009) 25, No. 7 (2009) 25, No. 6 (2009) 25, No. 5 (2009) 25, No. 4 (2009) 25, No. 3 (2009) 25, No. 2 (2009) 25, No. 1 (2009) 24, No. 12 (2008) 24, No. 11 (2008) 24, No. 10 (2008) 24, No. 9 (2008) 24, No. 8 (2008) 24, No. 7 (2008) 24, No. 6 (2008) 24, No. 5 (2008) 24, No. 4 (2008) 24, No. 3 (2008) 24, No. 2 (2008) 24, No. 1 (2008) 23, No. 12 (2007) 23, No. 10-11 (2007) 23, No. 9 (2007) 23, No. 8 (2007) 23, No. 7 (2007) 23, No. 6 (2007) 23, No. 4 (2007) 23, No. 3 (2007) 23, No. 2 (2007) 23, No. 1 (2007) 22, No. 12 (2006) 22, No. 11 (2006) 22, No. 10 (2006) 22, No. 9 (2006) 22, No. 8 (2006) 22, No. 7 (2006) 22, No. 6 (2006) 22, No. 5 (2006) 22, No. 4 (2006) 22, No. 3 (2006) 22, No. 2 (2006) 22, No. 1 (2006) 21, No. 12 (2005) 21, No. 11 (2005) 21, No. 10 (2005) 21, No. 9 (2005) 21, No. 8 (2005) 21, No. 7 (2005) 21, No. 6 (2005) 21, No. 5 (2005) 21, No. 4 (2005) 21, No. 3 (2005) 21, No. 2 (2005) 21, No. 1 (2005) 20, No. 12 (2004) 20, No. 11 (2004) 20, No. 10 (2004) 20, No. 8-9 (2004) 20, No. 7 (2004) 20, No. 6 (2004) 20, No. 4-5 (2004) 20, No. 3 (2004) 20, No. 2 (2004) 20, No. 1 (2004) 19, No. 12 (2003) 19, No. 11 (2003) 19, No. 10 (2003) 19, No. 9 (2003) 19, No. 8 (2003) 19, No. 7 (2003) 19, No. 6 (2003) 19, No. 5 (2003) 19, No. 4 (2003) 19, No. 3 (2003) 19, No. 2 (2003) 19, No. 1 (2003) 18, No. 12 (2002) ...and 123 more Volumes all top 5 Authors 33 Barlat, Frédéric 28 Voyiadjis, George Z. 24 Wagoner, Robert H. 24 Yoon, Jeong-Whan 23 Chung, Kwansoo 23 Khan, Akhtar S. 23 McDowell, David L. 17 Huang, Yonggang Young 17 Zbib, Hussein M. 16 Berveiller, Marcel 15 Ohno, Nobutada 14 Hashiguchi, Koichi 14 Lee, Myoung-Gyu 14 Neale, Kenneth W. 13 Van Houtte, Paul 13 Weng, George J. 13 Wu, Peidong 12 Atluri, Satya N. 12 Cailletaud, Georges 11 Bruhns, Otto Timme 11 Jiang, Yanyao 11 Kalidindi, Surya R. 10 Anand, Lallit 10 Batra, Romesh C. 10 Havner, Kerry S. 10 Pindera, Marek-Jerzy 10 Rajagopal, Kumbakonam Ramamani 10 Runesson, Kenneth 10 Srinivasa, Arun R. 10 Stoughton, Thomas B. 9 Arnold, Steven M. 9 Cazacu, Oana 9 Chaboche, Jean-Louis 9 Li, Ming 9 Taleb, Lakhdar 8 Auricchio, Ferdinando 8 Brünig, Michael 8 Garmestani, Hamid 8 Pourboghrat, Farhang 7 Abdel-Karim, Mohammad 7 Adams, Brent L. 7 Aifantis, Elias C. 7 Dunne, Fionn P. E. 7 Han, Chung-Souk 7 Haupt, Peter 7 Horstemeyer, Mark F. 7 Krempl, Erhard 7 Kuroda, Mitsutoshi 7 Levitas, Valery I. 7 Lubarda, Vlado A. 7 Moosbrugger, John C. 7 Polizzotto, Castrenze 7 van der Giessen, Erik 7 Wright, Thomas W. 6 Brocks, Wolfgang 6 Eftis, John 6 Hassan, Tasnim 6 Inal, Kaan 6 Kyriakides, Stelios 6 Kysar, Jeffrey W. 6 Lagoudas, Dimitris C. 6 Molinari, Alain 6 Ristinmaa, Matti 6 Stumpf, Helmut 6 Yoshida, Fusahito 6 Zhang, Jixi 5 Abu Al-Rub, Rashid K. 5 Benson, David J. 5 Berbenni, Stephane 5 Bertram, Albrecht 5 Busso, Esteban P. 5 Casey, James 5 Cervera, Miguel 5 Dawson, Paul R. 5 Delannay, Laurent 5 Dick, Robert E. 5 Doghri, Issam 5 Gao, Huajian 5 Gurtin, Morton Edward 5 Kim, Chongmin 5 Kim, Daeyong 5 Li, Zhenhuan 5 Lin, Jianguo 5 Macewen, S. R. 5 Meyers, Albert Thomas Marie 5 Montheillet, Frank 5 Morrison, D. J. T. 5 Mróz, Zenon 5 Nemes, James A. 5 Stein, Erwin 5 Tokuda, Masataka 5 Tomé, Carlos N. 5 Tsakmakis, Ch. 5 Tugcu, Pirol 5 Van Bael, Albert 5 Vogler, Tracy J. 5 Wu, Han-Chin 5 Xiao, Heng 5 Yaguchi, Masatsugu 5 Yang, Dong-Yol ...and 1,694 more Authors all top 5 Fields 1,381 Mechanics of deformable solids (74-XX) 62 Statistical mechanics, structure of matter (82-XX) 22 General and overarching topics; collections (00-XX) 15 Classical thermodynamics, heat transfer (80-XX) 5 Biology and other natural sciences (92-XX) 4 History and biography (01-XX) 4 Operations research, mathematical programming (90-XX) 3 Partial differential equations (35-XX) 3 Numerical analysis (65-XX) 2 Group theory and generalizations (20-XX) 2 Dynamical systems and ergodic theory (37-XX) 2 Calculus of variations and optimal control; optimization (49-XX) 2 Geophysics (86-XX) 2 Systems theory; control (93-XX) 1 Geometry (51-XX) 1 Differential geometry (53-XX) 1 Probability theory and stochastic processes (60-XX) 1 Computer science (68-XX) 1 Fluid mechanics (76-XX) 1 Game theory, economics, finance, and other social and behavioral sciences (91-XX) 1 Information and communication theory, circuits (94-XX) Publications by Year all cited Publications top 5 cited Publications Citations contained in zbMATH Open 1,208 Publications have been cited 11,016 times in 3,947 Documents Cited by ▼ Year ▼ The physics of plastic deformation. Zbl 0616.73106 Aifantis, Elias C. 183 1987 Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Zbl 0695.73001 Chaboche, J. L. 112 1989 Thermomechanics of volumetric growth in uniform bodies. Zbl 0979.74006 Epstein, Marcelo; Maugin, Gérard A. 100 2000 A review of some plasticity and viscoplasticity constitutive theories. Zbl 1142.74012 Chaboche, J. L. 100 2008 Kinematic hardening rules with critical state of dynamic recovery. I: Formulation and basic features for ratchetting behavior. II: Applications to experiments of ratchetting behavior. Zbl 0777.73017 Ohno, N.; Wang, J.-D. 81 1993 A thermodynamical constitutive model for shape memory materials. I: The monolithic shape memory alloy. Zbl 0898.73020 Boyd, J. G.; Lagoudas, D. C. 80 1996 Plane stress yield function for aluminum alloy sheets. I: Theory. Zbl 1114.74370 Barlat, F.; Brem, J. C.; Yoon, J. W.; Chung, K.; Dick, R. E.; Lege, D. J.; Pourboghrat, F.; Choi, S.-H.; Chu, E. 78 2003 Time-independent constitutive theories for cyclic plasticity. Zbl 0612.73038 Chaboche, J. L. 75 1986 Linear transformation-based anisotropic yield functions. Zbl 1161.74328 Barlat, F.; Aretz, H.; Yoon, J. W.; Karabin, M. E.; Brem, J. C.; Dick, R. E. 65 2005 A priori stability estimates and unconditionally stable product formula algorithms for nonlinear coupled thermoplasticity. Zbl 0791.73026 Armero, F.; Simo, J. C. 62 1993 Mechanics of the inelastic behavior of materials. I: Theoretical underpinnings. Zbl 0978.74013 Rajagopal, K. R.; Srinivasa, A. R. 60 1998 Strong discontinuities and continuum plasticity models: the strong discontinuity approach. Zbl 1057.74512 Oliver, J.; Cervera, M.; Manzoli, O. 60 1999 Plastic spin: Necessity or redundancy? Zbl 0947.74008 Dafalias, Yannis F. 58 1998 A conventional theory of mechanism-based strain gradient plasticity. Zbl 1254.74019 Huang, Y.; Qu, S.; Hwang, K. C.; Li, M.; Gao, H. 56 2004 Nonlocal implicit gradient-enhanced elasto-plasticity for the modelling of softening behaviour. Zbl 1090.74519 Engelen, Roy A. B.; Geers, Marc G. D.; Baaijens, Frank P. T. 53 2003 A three-dimensional model describing stress-induced solid phase transformation with permanent inelasticity. Zbl 1105.74031 Auricchio, F.; Reali, A.; Stefanelli, U. 51 2007 Orthotropic yield criterion for hexagonal closed packed metals. Zbl 1090.74015 Cazacu, Oana; Plunkett, Brian; Barlat, Frédéric 49 2006 A constitutive equation for nonlinear solids which undergo deformation induced microstructural changes. Zbl 0765.73005 Rajagopal, K. R.; Wineman, A. S. 49 1992 On a framework for small-deformation viscoplasticity: Free energy, microforces, strain gradients. Zbl 1032.74521 Gurtin, Morton E. 49 2003 A thermomechanical framework for constitutive models for rate-independent dissipative materials. Zbl 0958.74011 Houlsby, G. T.; Puzrin, A. M. 46 2000 Constitutive modelling in finite thermoviscoplasticity: A physical approach based on nonlinear rheological models. Zbl 0996.74022 Lion, Alexander 44 2000 Finite deformation pseudo-elasticity of shape memory alloys – constitutive modelling and finite element implementation. Zbl 1145.74005 Reese, Stefanie; Christ, Daniel 43 2008 A new model of metal plasticity and fracture with pressure and Lode dependence. Zbl 1421.74016 Bai, Yuanli; Wierzbicki, Tomasz 42 2008 Exact results and approximate models for porous viscoplastic solids. Zbl 0821.73022 Leblond, J. B.; Perrin, G.; Suquet, P. 42 1994 A 3-D constitutive model for shape memory alloys incorporating pseudoelasticity and detwinning of self-accommodated martensite. Zbl 1127.74008 Popov, Peter; Lagoudas, Dimitris C. 41 2007 Mechanics of the inelastic behavior of materials. II: Inelastic response. Zbl 0978.74014 Rajagopal, K. R.; Srinivasa, A. R. 40 1998 Well-posedness of a model of strain gradient plasticity for plastically irrotational materials. Zbl 1139.74009 Reddy, B. Daya; Ebobisse, François; McBride, Andrew 39 2008 A theory of strain-gradient plasticity for isotropic, plastically irrotational materials. II: Finite deformations. Zbl 1101.74316 Gurtin, Morton E.; Anand, Lallit 39 2005 Modeling dislocations and disclinations with finite micropolar elastoplasticity. Zbl 1101.74018 Clayton, J. D.; McDowell, D. L.; Bammann, D. J. 39 2006 On the capabilities of mean-field approaches for the description of plasticity in metal matrix composites. Zbl 1229.74150 Chaboche, J. L.; Kanouté, P.; Roos, A. 38 2005 Size-dependent yield strength of thin films. Zbl 1114.74365 Fredriksson, P.; Gudmundson, P. 38 2005 Self-consistent Eulerian rate type elasto-plasticity models based upon the logarithmic stress rate. Zbl 1036.74010 Bruhns, O. T.; Xiao, H.; Meyers, A. 37 1999 A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals. Zbl 1107.74006 Cazacu, Oana; Barlat, Frédéric 37 2004 An internal variable constitutive model for hot working of metals. Zbl 0695.73002 Brown, Stuart B.; Kim, Kwon H.; Anand, Lallit 37 1989 Towards a micromechanics-based inelastic and damage modeling of composites. Zbl 0988.74006 Chaboche, J. L.; Kruch, S.; Maire, J. F.; Pottier, T. 36 2001 Unified stress update algorithms for the numerical simulation of large deformation elasto-plastic and elasto-viscoplastic processes. Zbl 1035.74012 Ponthot, J. P. 36 2002 A thermodynamic finite-strain model for pseudoelastic shape memory alloys. Zbl 1099.74050 Müller, Ch.; Bruhns, O. T. 36 2006 Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids. Zbl 1421.74023 Monchiet, Vincent; Cazacu, Oana; Charkaluk, Eric; Kondo, Djimedo 34 2008 A discrete dislocation analysis of bending. Zbl 0976.74048 Cleveringa, H. H. M.; Van der Giessen, E.; Needleman, A. 34 1999 A stabilized formulation for incompressible plasticity using linear triangles and tetrahedra. Zbl 1066.74587 Chiumenti, M.; Valverde, Q.; de Saracibar, C. Agelet; Cervera, M. 34 2004 A variational formulation for nonlocal damage models. Zbl 1024.74005 Lorentz, E.; Andrieux, S. 33 1999 Kinematic hardening model suitable for ratchetting with steady-state. Zbl 0977.74503 Abdel-Karim, M.; Ohno, N. 33 2000 A physically based gradient plasticity theory. Zbl 1190.74003 Abu Al-Rub, Rashid K.; Voyiadjis, George Z. 33 2006 A thermodynamically consistent theory of gradient-regularized plasticity coupled to damage. Zbl 0897.73023 Svedberg, T.; Runesson, K. 32 1997 The decomposition \(\mathbf F = \mathbf F^{\text e}\mathbf F^{\text b}\), material symmetry, and plastic irrotationality for solids that are isotropic-viscoplastic or amorphous. Zbl 1180.74009 Gurtin, Morton E.; Anand, Lallit 32 2005 A constitutive model for hcp materials deforming by slip and twinning: application to magnesium alloy AZ31B. Zbl 1098.74546 Staroselsky, A.; Anand, L. 32 2003 A finite-deformation, gradient theory of single-crystal plasticity with free energy dependent on densities of geometrically necessary dislocations. Zbl 1131.74006 Gurtin, Morton E. 31 2008 Discontinuous bifurcations of elastic-plastic solutions at plane stress and plane strain. Zbl 0761.73035 Runesson, Kenneth; Ottosen, Niels Saabye; Perić, Dunja 31 1991 An alternative approach to finite plasticity based on material isomorphisms. Zbl 1016.74009 Bertram, Albrecht 30 1999 Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function. Zbl 1148.74325 Yoon, J. W.; Barlat, F.; Dick, R. E.; Karabin, M. E. 30 2006 Constitutive equations for hot-working of metals. Zbl 0612.73043 Anand, Lallit 30 1985 Deformation texture prediction: from the Taylor model to the advanced LAMEL model. Zbl 1154.74320 Van Houtte, Paul; Li, Saiyi; Seefeldt, Marc; Delannay, Laurent 30 2005 Shakedown with nonlinear strain-hardening including structural computation using finite element method. Zbl 0766.73026 Stein, Erwin; Zhang, Genbao; König, Jan A. 30 1992 Parameter identification for viscoplastic models based on analytical derivatives of a least-squares functional and stability investigations. Zbl 0883.73028 Mahnken, Rolf; Stein, Erwin 30 1996 Anatomy of coupled constitutive models for ratcheting simulation. Zbl 1004.74020 Bari, Shafiqul; Hassan, Tasnim 29 2000 A multivariant micromechanical model for SMAs. I: Crystallographic issues for single crystal model. II: Polycrystal model. Zbl 0986.74053 Gao, Xiujie; Huang, Miinshiou; Brinson, L. Catherine 29 2000 Intergranular and intragranular behavior of polycrystalline aggregates. I: F. E. model. Zbl 1067.74011 Barbe, Fabrice; Decker, Luc; Jeulin, Dominique; Cailletaud, Georges 29 2001 Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models. Zbl 1419.74011 Hassan, Tasnim; Taleb, Lakhdar; Krishna, Shree 29 2008 Hardening evolution of AZ31B Mg sheet. Zbl 1331.74007 Lou, X. Y.; Li, M.; Boger, R. K.; Agnew, S. R.; Wagoner, R. H. 28 2007 Statistical damage theory of 2D lattices: energetics and physical foundations of damage parameter. Zbl 1155.74402 Rinaldi, A.; Lai, Y.-C. 28 2007 A new view on transformation induced plasticity (TRIP). Zbl 0947.74560 Fischer, F. D.; Reisner, G.; Werner, E.; Tanaka, K.; Cailletaud, G.; Antretter, T. 27 2000 A dislocation-based constitutive law for pure Zr including temperature effects. Zbl 1144.74313 Beyerlein, I. J.; Tomé, C. N. 26 2008 Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modeling. Zbl 1330.74052 Liu, Yiping; Gall, Ken; Dunn, Martin L.; Greenberg, Alan R.; Diani, Julie 26 2006 An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation. Zbl 1050.74010 Bari, Shafiqul; Hassan, Tasnim 26 2002 Multi-mechanism models for the description of ratchetting: effect of the scale transition rule and of the coupling between hardening variables. Zbl 1134.74323 Sai, K.; Cailletaud, G. 25 2007 A thermodynamic formulation of finite-deformation elastoplasticity with hardening based on the concept of material isomorphism. Zbl 0971.74017 Svendsen, Bob 25 1998 On the selection of active slip systems in crystal plasticity. Zbl 1330.74045 Busso, Esteban P.; Cailletaud, Georges 25 2005 A yield function for anisotropic materials application to aluminum alloys. Zbl 1254.74105 Bron, F.; Besson, J. 25 2004 Thermodynamic framework for coupling of non-local viscoplasticity and non-local anisotropic viscodamage for dynamic localization problems using gradient theory. Zbl 1178.74029 Voyiadjis, George Z.; Al-Rub, Rashid K. Abu; Palazotto, Anthony N. 25 2004 A model of elastoplastic bodies with continuously distributed dislocations. Zbl 0866.73022 Le, K. C.; Stumpf, H. 25 1996 Ratcheting of cyclically hardening and softening materials. I: Uniaxial behavior. II: Multiaxial behavior. Zbl 0800.73077 Hassan, Tasnim; Kyriakides, Stelios 25 1994 A multiscale multiplicative decomposition for elastoplasticity of polycrystals. Zbl 1114.74358 Clayton, J. D.; McDowell, D. L. 25 2003 An anisotropic ductile damage model based on irreversible thermodynamics. Zbl 1098.74050 Brünig, Michael 25 2003 On the representation of Prandtl-Reuss tensors within the framework of multiplicative elastoplasticity. Zbl 0810.73016 Miehe, Christian 24 1994 On modeling the micro-indentation response of an amorphous polymer. Zbl 1176.74038 Anand, L.; Ames, N. M. 24 2006 A method of plasticity for general aligned spheroidal void or fiber-reinforced composites. Zbl 0884.73035 Hu, Gengkai 24 1996 On XFEM applications to dislocations and interfaces. Zbl 1126.74046 Belytschko, Ted; Gracie, Robert 24 2007 Benchmark experiments and characteristic cyclic plasticity deformation. Zbl 1338.74018 Jiang, Yanyao; Zhang, Jixi 24 2008 A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation. Zbl 1038.74013 Yoshida, Fusahito; Uemori, Takeshi 24 2002 Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals. Zbl 1144.74309 Plunkett, B.; Cazacu, O.; Barlat, F. 23 2008 Geometrical material structure of elastoplasticity. Zbl 0911.73028 Maugin, G. A.; Epstein, M. 23 1998 A thermo-mechanically coupled theory for large deformations of amorphous polymers. I: Formulation. Zbl 1165.74011 Anand, Lallit; Ames, Nicoli M.; Srivastava, Vikas; Chester, Shawn A. 23 2009 A thermodynamical theory of gradient elastoplasticity with dislocation density tensor. I: Fundamentals. Zbl 0974.74014 Shizawa, K.; Zbib, H. M. 23 1999 Plane stress yield function for aluminum alloy sheets. II: FE formulation and its implementation. Zbl 1254.74113 Yoon, Jeong-Whan; Barlat, Frédéric; Dick, Robert E.; Chung, Kwansoo; Kang, Tae Jin 23 2004 An enhanced affine formulation and the corresponding numerical algorithms for the mean-field homogenization of elasto-viscoplastic composites. Zbl 1089.74043 Pierard, Olivier; Doghri, Issam 23 2006 Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. I: Theory and formulation. Zbl 1161.74331 Chung, Kwansoo; Lee, Myoung-Gyu; Kim, Daeyong; Kim, Chongmin; Wenner, Michael L.; Barlat, Frederic 23 2005 Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B. Zbl 1154.74305 Agnew, Sean R.; Duygulu, Özgür 23 2005 Fractional relaxation processes and fractional rheological models for the description of a class of viscoelastic materials. Zbl 1090.74673 Metzler, Ralf; Nonnenmacher, Theo F. 23 2003 Higher-order theory for periodic multiphase materials with inelastic phases. Zbl 1090.74529 Aboudi, Jacob; Pindera, Marek-Jerzy; Arnold, Steven M. 23 2003 A multiscale model of plasticity. Zbl 1062.74008 Zbib, Hussein M.; Diaz de la Rubia, Tomas 23 2002 Multi-axial behavior of shape-memory alloys undergoing martensitic reorientation and detwinning. Zbl 1190.74026 Pan, H.; Thamburaja, P.; Chau, F. S. 22 2007 The role of texture in tension-compression asymmetry in polycrystalline NiTi. Zbl 1056.74525 Gall, Ken; Sehitoglu, Huseyin 22 1999 Earing predictions based on asymmetric nonquadratic yield function. Zbl 0986.74015 Yoon, J. W.; Barlat, F.; Chung, K.; Pourboghrat, F.; Yang, D. Y. 22 2000 On thermomechanics and transformation surfaces of polycrystalline NiTi shape memory alloy material. Zbl 1032.74043 Qidwai, M. A.; Lagoudas, D. C. 22 2000 Interface propagation and microstructure evolution in phase field models of stress-induced martensitic phase transformations. Zbl 1454.74130 Levitas, Valery I.; Lee, Dong-Wook; Preston, Dean L. 22 2010 A second gradient theoretical framework for hierarchical multiscale modeling of materials. Zbl 1436.74005 Luscher, Darby J.; McDowell, David L.; Bronkhorst, Curt A. 22 2010 Nonlinear dependence of viscosity in modeling the rate-dependent response of natural and high damping rubbers in compression and shear: experimental identification and numerical verification. Zbl 1146.74310 Amin, A. F. M. S.; Lion, A.; Sekita, S.; Okui, Y. 22 2006 Stress computation in finite thermoviscoplasticity. Zbl 1294.74020 Helm, Dirk 22 2006 Micromechanical modeling of stress-induced phase transformations. I: Thermodynamics and kinetics of coupled interface propagation and reorientation. Zbl 1277.74059 Levitas, Valery I.; Ozsoy, Istemi B. 22 2009 A framework for multiplicative elastoplasticity with kinematic hardening coupled to anisotropic damage. Zbl 1089.74014 Menzel, A.; Ekh, M.; Runesson, K.; Steinmann, P. 22 2005 A chemo-thermo-mechanically coupled theory for elastic-viscoplastic deformation, diffusion, and volumetric swelling due to a chemical reaction. Zbl 1426.74137 Loeffel, Kaspar; Anand, Lallit 20 2011 A second-moment incremental formulation for the mean-field homogenization of elasto-plastic composites. Zbl 1426.74112 Doghri, I.; Brassart, L.; Adam, L.; Gérard, J.-S. 17 2011 A theory of plasticity for carbon nanotube reinforced composites. Zbl 1426.74086 Barai, Pallab; Weng, George J. 16 2011 A finite strain kinematic hardening constitutive model based on Hencky strain: general framework, solution algorithm and application to shape memory alloys. Zbl 1426.74065 Arghavani, J.; Auricchio, F.; Naghdabadi, R. 14 2011 Modeling the viscoplastic micromechanical response of two-phase materials using fast Fourier transforms. Zbl 1405.74012 Lee, S.-B.; Lebensohn, R. A.; Rollett, A. D. 13 2011 A thermodynamic consistent damage and healing model for self healing materials. Zbl 1454.74136 Voyiadjis, George Z.; Shojaei, Amir; Li, Guoqiang 11 2011 On torsion of a single crystal rod. Zbl 1426.74184 Kaluza, M.; Le, K. C. 10 2011 A constitutive model for shape memory alloys accounting for thermomechanical coupling. Zbl 1426.74082 Morin, Claire; Moumni, Ziad; Zaki, Wael 10 2011 An alternative to kinematic hardening in classical plasticity. Zbl 1400.74010 Barlat, Frédéric; Gracio, José J.; Lee, Myoung-Gyu; Rauch, Edgar F.; Vincze, Gabriela 10 2011 Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures. Zbl 1426.74013 Khan, Akhtar S.; Pandey, Amit; Gnäupel-Herold, Thomas; Mishra, Raja K. 9 2011 A numerical modelling of 3D polycrystal-to-polycrystal diffusive phase transformations involving crystal plasticity. Zbl 1453.74069 Barbe, F.; Quey, R. 7 2011 Size-effects on yield surfaces for micro reinforced composites. Zbl 1426.74067 Azizi, Reza; Niordson, Christian F.; Legarth, Brian Nyvang 7 2011 Thermomechanical coupling in shape memory alloys under cyclic loadings: experimental analysis and constitutive modeling. Zbl 1442.74046 Morin, Claire; Moumni, Ziad; Zaki, Wael 7 2011 Non-quadratic Kelvin modes based plasticity criteria for anisotropic materials. Zbl 1429.74026 Desmorat, Rodrigue; Marull, Roxane 6 2011 On the coupling of plastic slip and deformation-induced twinning in magnesium: A variationally consistent approach based on energy minimization. Zbl 1453.74017 Homayonifar, M.; Mosler, J. 6 2011 A self-optimizing inverse analysis method for estimation of cyclic elasto-plasticity model parameters. Zbl 1426.74146 Yun, Gun Jin; Shang, Shen 5 2011 A constitutive model for rate dependent and rate independent inelasticity. Application to IN718. Zbl 1426.74055 Becker, Martin; Hackenberg, Hans-Peter 5 2011 Rate dependent finite strain constitutive model of polyurea. Zbl 1406.74149 Shim, Jongmin; Mohr, Dirk 5 2011 A multi-axial, multimechanism based constitutive model for the comprehensive representation of the evolutionary response of SMAs under general thermomechanical loading conditions. Zbl 1426.74062 Saleeb, A. F.; Padula, S. A. II; Kumar, A. 5 2011 Evaluation of advanced anisotropic models with mixed hardening for general associated and non-associated flow metal plasticity. Zbl 1426.74307 Taherizadeh, Aboozar; Green, Daniel E.; Yoon, Jeong Whan 5 2011 Biaxial ratchetting with novel variations of kinematic hardening. Zbl 1427.74032 Dafalias, Yannis F.; Feigenbaum, Heidi P. 4 2011 Experimental investigation and modeling of non-monotonic creep behavior in polymers. Zbl 1426.74014 Khan, Fazeel; Yeakle, Colin 4 2011 A new approach for failure criterion for sheet metals. Zbl 1426.74276 Stoughton, Thomas B.; Yoon, Jeong Whan 4 2011 A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model. Zbl 1441.74225 Kadkhodapour, J.; Butz, A.; Ziaei-Rad, S.; Schmauder, S. 4 2011 Finite element implementation of a microstructure-based model for filled elastomers. Zbl 1426.74290 Freund, M.; Lorenz, H.; Juhre, D.; Ihlemann, J.; Klüppel, M. 4 2011 A new analytical theory for earing generated from anisotropic plasticity. Zbl 1426.74074 Yoon, J. W.; Dick, R. E.; Barlat, F. 4 2011 An alternative approach to integrating plasticity relations. Zbl 1426.74281 Becker, Richard 4 2011 The structure and energetics of, and the plasticity caused by, Eshelby dislocations. Zbl 1452.74006 Weinberger, Christopher R. 4 2011 Modeling and simulation of the coupled mechanical-electrical response of soft solids. Zbl 1350.74008 Gao, Zhan; Tuncer, Alisar; Cuitiño, Alberto M. 4 2011 Simulation of damage evolution in ductile metals undergoing dynamic loading conditions. Zbl 1287.74040 Brünig, Michael; Gerke, Steffen 4 2011 Dual-stage nested homogenization for rate-dependent anisotropic elasto-plasticity model of dendritic cast aluminum alloys. Zbl 1419.74212 Paquet, Daniel; Dondeti, Piyush; Ghosh, Somnath 4 2011 Incorporation of twinning into a crystal plasticity finite element model: evolution of lattice strains and texture in Zircaloy-2. Zbl 1426.74280 Abdolvand, Hamidreza; Daymond, Mark R.; Mareau, Charles 4 2011 Anisotropic responses, constitutive modeling and the effects of strain-rate and temperature on the formability of an aluminum alloy. Zbl 1426.74011 Khan, Akhtar S.; Baig, Muneer 3 2011 A unified residual-based thermodynamic framework for strain gradient theories of plasticity. Zbl 1453.74016 Polizzotto, Castrenze 3 2011 Crystal-plasticity finite-element analysis of inelastic behavior during unloading in a magnesium alloy sheet. Zbl 1426.74100 Hama, Takayuki; Takuda, Hirohiko 3 2011 Multiscale modelling of the induced plastic anisotropy in bcc metals. Zbl 1426.74089 Hamelin, C. J.; Diak, B. J.; Pilkey, A. K. 3 2011 Void growth and coalescence in ductile solids with stage III and stage IV strain hardening. Zbl 1426.74272 Lecarme, L.; Tekoğlu, C.; Pardoen, T. 3 2011 A stochastic approach to capture crystal plasticity. Zbl 1284.74149 Zhang, Liangzhe; Dingreville, Rémi; Bartel, Timothy; Lusk, Mark T. 3 2011 An atomistically-informed dislocation dynamics model for the plastic anisotropy and tension-compression asymmetry of BCC metals. Zbl 1350.74001 Wang, Z. Q.; Beyerlein, I. J. 3 2011 Wedge indentation into elastic-plastic single crystals. I: Asymptotic fields for nearly-flat wedge. Zbl 1426.74239 Saito, Y.; Kysar, J. W. 3 2011 Continuum modeling of the response of a Mg alloy AZ31 rolled sheet during uniaxial deformation. Zbl 1426.74088 Fernández, Ana; Prado, María Teresa Pérez; Wei, Yujie; Jérusalem, Antoine 3 2011 Crystal plasticity analysis of texture development in magnesium alloy during extrusion. Zbl 1426.74081 Mayama, Tsuyoshi; Noda, Masafumi; Chiba, Ryoichi; Kuroda, Mitsutoshi 3 2011 On the plastic anisotropy of an aluminium alloy and its influence on constrained multiaxial flow. Zbl 1426.74069 Fourmeau, M.; Børvik, T.; Benallal, A.; Lademo, O. G.; Hopperstad, O. S. 3 2011 Multi-scale analysis in elasto-viscoplasticity coupled with damage. Zbl 1426.74058 Kruch, Serge; Chaboche, Jean-Louis 3 2011 Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: experiments and constitutive modelling. Zbl 1426.74076 Ayoub, G.; Zaïri, F.; Fréderix, C.; Gloaguen, J. M.; Naït-Abdelaziz, M.; Seguela, R.; Lefebvre, J. M. 2 2011 A thermodynamical gradient theory for deformation and strain localization of porous media. Zbl 1426.74091 Mroginski, Javier L.; Etse, Guillermo; Vrech, Sonia M. 2 2011 Theoretical and numerical modeling of the thermomechanical and metallurgical behavior of steel. Zbl 1426.74060 Moumni, Ziad; Roger, Frédéric; Trinh, Ngoc Thuy 2 2011 Transient and steady-state nanoindentation creep of polymeric materials. Zbl 1431.74034 Huang, Chien-Chao; Wei, Mao-Kuo; Lee, Sanboh 2 2011 Complex unloading behavior: nature of the deformation and its consistent constitutive representation. Zbl 1426.74071 Sun, Li; Wagoner, R. H. 2 2011 Determination of constitutive response of plastically graded materials. Zbl 1426.74003 Branch, Nathan A.; Arakere, Nagaraj K.; Subhash, Ghatu; Klecka, Michael A. 2 2011 An experimental study of cyclic deformation of extruded AZ61A magnesium alloy. Zbl 1426.74026 Zhang, Jixi; Yu, Qin; Jiang, Yanyao; Li, Qizhen 2 2011 Creep and recovery of polypropylene/carbon nanotube composites. Zbl 1426.74008 Jia, Yu; Peng, Ke; Gong, Xing-Long; Zhang, Zhong 2 2011 Cyclic behaviour of short glass fibre reinforced polyamide: experimental study and constitutive equations. Zbl 1426.74115 Launay, A.; Maitournam, M. H.; Marco, Y.; Raoult, I.; Szmytka, F. 2 2011 A novel yield locus description by combining the Taylor and the relaxed Taylor theory for sheet steels. Zbl 1426.74064 An, Yuguo; Vegter, Henk; Carless, Louisa; Lambriks, Marc 2 2011 Deformation of silicon - insights from microcompression testing at 25-500\(^\circ \)C. Zbl 1426.74015 Korte, S.; Barnard, J. S.; Stearn, R. J.; Clegg, W. J. 2 2011 Sequential evaluation of continuous deformation field of semi-crystalline polymers during tensile deformation accompanied by neck propagation. Zbl 1426.74092 Uchida, Makoto; Tada, Naoya 2 2011 Microstructural size effects on mechanical properties of high purity nickel. Zbl 1426.74010 Keller, C.; Hug, E.; Feaugas, X. 1 2011 Semi phenomenological modelling of the behavior of TRIP steels. Zbl 1452.74090 Kubler, R. F.; Berveiller, M.; Buessler, P. 1 2011 Trapping and escape of dislocations in micro-crystals with external and internal barriers. Zbl 1426.74099 El-Awady, Jaafar A.; Rao, Satish I.; Woodward, Christopher; Dimiduk, Dennis M.; Uchic, Michael D. 1 2011 Non-local and numerical formulations for dry sliding friction and wear at high velocities. Zbl 1426.74043 Lodygowski, A.; Voyiadjis, G. Z.; Deliktas, B.; Palazotto, A. 1 2011 Non-equilibrium grain boundary structure and inelastic deformation using atomistic simulations. Zbl 1426.74109 Tucker, Garritt J.; McDowell, David L. 1 2011 Nanocharacterization of creep behavior of multiwall carbon nanotubes/epoxy nanocomposite. Zbl 1426.74021 Tehrani, M.; Safdari, M.; Al-Haik, M. S. 1 2011 Effects of the strain-hardening exponent on two-parameter characterizations of surface-cracks under large-scale yielding. Zbl 1426.74270 English, Shawn A.; Arakere, Nagaraj K. 1 2011 A ‘stack’ model of rate-independent polycrystals. Zbl 1426.74066 Arul Kumar, M.; Mahesh, Sivasambu; Parameswaran, V. 1 2011 The role of grain boundaries on fatigue crack initiation – an energy approach. Zbl 1395.74082 Sangid, Michael D.; Maier, Hans J.; Sehitoglu, Huseyin 1 2011 On the uniqueness of a rate-independent plasticity model for single crystals. Zbl 1426.74063 Zuo, Q. H. 1 2011 Dislocation based high-rate plasticity model and its application to plate-impact and ultra short electron irradiation simulations. Zbl 1426.74267 Krasnikov, V. S.; Mayer, A. E.; Yalovets, A. P. 1 2011 Simulation of polycrystal deformation with grain and grain boundary effects. Zbl 1426.74133 Lim, H.; Lee, M. G.; Kim, J. H.; Adams, B. L.; Wagoner, R. H. 1 2011 A modified damage model for advanced high strength steel sheets. Zbl 1426.74268 Chung, Kwansoo; Ma, Ning; Park, Taejoon; Kim, Dongun; Yoo, Donghoon; Kim, Chongmin 1 2011 Duplex model for homogenized elastic-viscoplastic behavior of plate-fin structures at high temperatures. Zbl 1277.74010 Tsuda, Masatoshi; Ohno, Nobutada 1 2011 3-D simulation of spatial stress distribution in an AZ31 Mg alloy sheet under in-plane compression. Zbl 1348.74069 Choi, S.-H.; Kim, D. W.; Seong, B. S.; Rollett, A. D. 1 2011 Meso-mechanical constitutive model for ratchetting of particle-reinforced metal matrix composites. Zbl 1358.74009 Guo, Sujuan; Kang, Guozheng; Zhang, Juan 1 2011 A homogenization theory for elastic-viscoplastic materials with misaligned internal structures. Zbl 1426.74070 Matsuda, T.; Kanamaru, S.; Yamamoto, N.; Fukuda, Y. 1 2011 Interface propagation and microstructure evolution in phase field models of stress-induced martensitic phase transformations. Zbl 1454.74130 Levitas, Valery I.; Lee, Dong-Wook; Preston, Dean L. 22 2010 A second gradient theoretical framework for hierarchical multiscale modeling of materials. Zbl 1436.74005 Luscher, Darby J.; McDowell, David L.; Bronkhorst, Curt A. 22 2010 A 3-D phenomenological constitutive model for shape memory alloys under multiaxial loadings. Zbl 1452.74088 Arghavani, J.; Auricchio, F.; Naghdabadi, R.; Reali, A.; Sohrabpour, S. 20 2010 Nonlinear elasto-plastic model for dense granular flow. Zbl 1415.74013 Kamrin, Ken 17 2010 Anisotropic finite elastoplasticity with nonlinear kinematic and isotropic hardening and application to sheet metal forming. Zbl 1426.74073 Vladimirov, Ivaylo N.; Pietryga, Michael P.; Reese, Stefanie 16 2010 Historical review of internal state variable theory for inelasticity. Zbl 1431.74031 Horstemeyer, Mark F.; Bammann, Douglas J. 15 2010 Mean-field homogenization of elasto-viscoplastic composites based on a general incrementally affine linearization method. Zbl 1426.74111 Doghri, I.; Adam, L.; Bilger, N. 15 2010 Three-dimensional modeling and numerical analysis of rate-dependent irrecoverable deformation in shape memory alloys. Zbl 1454.74020 Hartl, Darren J.; Chatzigeorgiou, George; Lagoudas, Dimitris C. 15 2010 A finite-deformation-based phenomenological theory for shape-memory alloys. Zbl 1426.74243 Thamburaja, P. 14 2010 A perspective on trends in multiscale plasticity. Zbl 1402.74022 Mcdowell, David L. 13 2010 Modelling large deformation behaviour under loading-unloading of semicrystalline polymers: application to a high density polyethylene. Zbl 1452.74023 Ayoub, G.; Zaïri, F.; Naït-Abdelaziz, M.; Gloaguen, J. M. 13 2010 Constitutive model for uniaxial transformation ratchetting of super-elastic NiTi shape memory alloy at room temperature. Zbl 1427.74033 Kan, Qianhua; Kang, Guozheng 13 2010 Effect of surface/interface stress on the plastic deformation of nanoporous materials and nanocomposites. Zbl 1454.74008 Zhang, W. X.; Wang, T. J.; Chen, X. 13 2010 A finite-deformation, gradient theory of single-crystal plasticity with free energy dependent on the accumulation of geometrically necessary dislocations. Zbl 1432.74047 Gurtin, Morton E. 13 2010 A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming. Zbl 1426.74072 Taherizadeh, Aboozar; Green, Daniel E.; Ghaei, Abbas; Yoon, Jeong-Whan 12 2010 Anisotropic response of high-purity \(\alpha \)-titanium: experimental characterization and constitutive modeling. Zbl 1426.74052 Nixon, Michael E.; Cazacu, Oana; Lebensohn, Ricardo A. 11 2010 Experimental lower bounds on geometrically necessary dislocation density. Zbl 1426.74016 Kysar, J. W.; Saito, Y.; Oztop, M. S.; Lee, D.; Huh, W. T. 11 2010 A plastic constitutive equation incorporating strain, strain-rate, and temperature. Zbl 1426.74084 Sung, Ji Hyun; Kim, Ji Hoon; Wagoner, R. H. 10 2010 An alternative treatment of phenomenological higher-order strain-gradient plasticity theory. Zbl 1426.74059 Kuroda, Mitsutoshi; Tvergaard, Viggo 10 2010 On kinematic, thermodynamic, and kinetic coupling of a damage theory for polycrystalline material. Zbl 1428.74024 Bammann, D. J.; Solanki, K. N. 10 2010 A novel yield function for single crystals based on combined constraints optimization. Zbl 1426.74105 Zamiri, Amir R.; Pourboghrat, Farhang 9 2010 Evaluation of associated and non-associated quadratic plasticity models for advanced high strength steel sheets under multi-axial loading. Zbl 1454.74022 Mohr, Dirk; Dunand, Matthieu; Kim, Keun-Hwan 9 2010 Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. II: A very high work hardening aluminum alloy (annealed 1100 Al). Zbl 1427.74002 Khan, Akhtar S.; Pandey, Amit; Stoughton, Thomas 9 2010 On non-associative anisotropic finite plasticity fully coupled with isotropic ductile damage for metal forming. Zbl 1431.74029 Badreddine, Houssem; Saanouni, Khemaïs; Dogui, Abdelwaheb 8 2010 Implicit stress-update algorithm for isotropic Cam-clay model based on the subloading surface concept at finite strains. Zbl 1441.74047 Yamakawa, Yuki; Hashiguchi, Koichi; Ikeda, Kiyohiro 8 2010 An evaluation for several kinematic hardening rules on prediction of multiaxial stress-controlled ratchetting. Zbl 1426.74051 Abdel-Karim, Mohammad 8 2010 Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method. Zbl 1426.74101 Kanjarla, Anand Krishna; Van Houtte, Paul; Delannay, Laurent 8 2010 ...and 1108 more Documents all cited Publications top 5 cited Publications all top 5 Cited by 5,539 Authors 34 Steinmann, Paul 31 Aifantis, Elias C. 29 Miehe, Christian 28 Kondo, Djimédo 27 Geers, Marc G. D. 27 Voyiadjis, George Z. 25 Rajagopal, Kumbakonam Ramamani 25 Xiao, Heng 24 Cervera, Miguel 23 Chiumenti, Michele 23 Forest, Samuel 23 Menzel, Andreas M. 22 McDowell, David L. 22 Svendsen, Bob 21 Bruhns, Otto Timme 21 Hopperstad, Odd Sture 21 Reese, Stefanie 20 Auricchio, Ferdinando 20 Barlat, Frédéric 20 Mahnken, Rolf 19 Cazacu, Oana 19 Ortiz, Michael 18 Liu, Wing Kam 18 Niordson, Christian F. 18 Roubíček, Tomáš 17 Anand, Lallit 17 Ghosh, Somnath 17 Gurtin, Morton Edward 17 Hartmann, Stefan 17 Stefanelli, Ulisse 17 Yoon, Jeong-Whan 16 Ganghoffer, Jean-François 16 Lagoudas, Dimitris C. 16 Oliver, Javier 16 Tvergaard, Viggo 16 Waisman, Haim 15 Cleja-Țigoiu, Sanda 15 Lee, Myoung-Gyu 15 Mosler, Jörn 15 Neff, Patrizio 15 Reddy, B. Dayanand 15 Sacco, Elio 14 Dawson, Paul R. 14 Fish, Jacob 14 Huespe, Alfredo E. 14 Le Khanh Chau 14 Marfia, Sonia 14 Ristinmaa, Matti 14 Shao, Jianfu 14 van der Giessen, Erik 14 Wagoner, Robert H. 13 Böhlke, Thomas 13 Chung, Kwansoo 13 Knezevic, Marko 13 Polizzotto, Castrenze 13 Rubin, Miles B. 13 Wriggers, Peter 13 Yavari, Arash 13 Zbib, Hussein M. 12 Huang, Yonggang Young 12 Larsson, Ragnar 12 Runesson, Kenneth 12 Schneider, Matti 12 Suquet, Pierre-Marie 11 Aldakheel, Fadi 11 Areias, Pedro M. A. 11 Børvik, Tore 11 Charalambakis, Nicolas Ch. 11 Darve, Félix 11 Doghri, Issam 11 Drozdov, Aleksey D. 11 Ekh, Magnus 11 Epstein, Marcelo 11 Grillo, Alfio 11 Habraken, Anne Marie 11 Khoei, Amir R. 11 Levitas, Valery I. 11 Liu, Yinghua 11 Meyers, Albert Thomas Marie 11 Needleman, Alan 11 Paulino, Glaucio H. 11 Ponthot, Jean-Philippe 11 Rabczuk, Timon 10 Artioli, Edoardo 10 Bronkhorst, Curt A. 10 Brünig, Michael 10 Kuroda, Mitsutoshi 10 Naghdabadi, Reza 10 Ohno, Nobutada 10 Owen, David Ross 10 Parry, Gareth P. 10 Petryk, Henryk 10 Placidi, Luca 10 Sluys, Lambertus Johannes 10 Stainier, Laurent 10 Stein, Erwin 10 Wineman, Alan S. 9 Acharya, Amit 9 Baghani, Mostafa 9 Bammann, Douglas J. ...and 5,439 more Authors all top 5 Cited in 197 Journals 540 Computer Methods in Applied Mechanics and Engineering 355 Journal of the Mechanics and Physics of Solids 339 European Journal of Mechanics. A. Solids 316 International Journal of Plasticity 281 Acta Mechanica 224 International Journal for Numerical Methods in Engineering 210 Computational Mechanics 185 International Journal of Solids and Structures 150 International Journal of Engineering Science 111 Mathematics and Mechanics of Solids 95 Continuum Mechanics and Thermodynamics 53 Journal of Elasticity 50 Applied Mathematical Modelling 50 Archive of Applied Mechanics 45 Meccanica 45 ZAMM. Zeitschrift für Angewandte Mathematik und Mechanik 42 International Journal of Fracture 39 International Journal for Numerical and Analytical Methods in Geomechanics 36 Engineering Analysis with Boundary Elements 32 Archives of Computational Methods in Engineering 31 Mechanics Research Communications 30 ZAMP. Zeitschrift für angewandte Mathematik und Physik 30 Acta Mechanica Sinica 27 Engineering Computations 20 GAMM-Mitteilungen 19 Journal of Computational Physics 18 Archive for Rational Mechanics and Analysis 18 Journal of Engineering Mathematics 17 Applied Mathematics and Mechanics. (English Edition) 17 Proceedings of the Royal Society of London. A. Mathematical, Physical and Engineering Sciences 16 Computers & Mathematics with Applications 14 Communications in Nonlinear Science and Numerical Simulation 12 M\(^3\)AS. Mathematical Models & Methods in Applied Sciences 12 Communications in Numerical Methods in Engineering 12 Nonlinear Analysis. Real World Applications 11 Mathematical Problems in Engineering 11 Proceedings of the Royal Society of London. Series A. Mathematical, Physical and Engineering Sciences 11 Vestnik Samarskogo Gosudarstvennogo Tekhnicheskogo Universiteta. Seriya Fiziko-Matematicheskie Nauki 10 Journal of Applied Mechanics and Technical Physics 10 Mathematics and Mechanics of Complex Systems 9 Journal of Fluid Mechanics 9 International Journal of Computational Methods 9 Inverse Problems in Science and Engineering 7 Computers and Fluids 7 Journal of Applied Mathematics and Mechanics 7 Mathematics and Computers in Simulation 7 Science in China. Series E 7 Lobachevskii Journal of Mathematics 7 Granular Matter 6 Journal of Nonlinear Science 6 Nonlinear Dynamics 6 AMM. Applied Mathematics and Mechanics. (English Edition) 5 Mathematical Methods in the Applied Sciences 5 Applied Mathematics and Computation 5 Journal of Computational and Applied Mathematics 5 Quarterly of Applied Mathematics 5 Theoretical and Applied Mechanics 5 Discrete and Continuous Dynamical Systems. Series S 5 Mechanics of Solids 4 Zeitschrift für Angewandte Mathematik und Mechanik (ZAMM) 4 Chaos, Solitons and Fractals 4 Physica D 4 Mathematical and Computer Modelling 4 International Applied Mechanics 4 International Journal of Numerical Methods for Heat & Fluid Flow 4 Philosophical Transactions of the Royal Society of London. Series A. Mathematical, Physical and Engineering Sciences 4 International Journal for Numerical Methods in Biomedical Engineering 3 Archives of Mechanics 3 Moscow University Mechanics Bulletin 3 Physica A 3 Journal of Global Optimization 3 Journal of Non-Equilibrium Thermodynamics 3 SIAM Journal on Scientific Computing 3 Journal of Vibration and Control 3 Sibirskiĭ Zhurnal Industrial’noĭ Matematiki 3 Optimization and Engineering 3 International Journal of Geometric Methods in Modern Physics 3 Journal of Zhejiang University. Science A 3 International Journal of Structural Stability and Dynamics 3 Philosophical Transactions of the Royal Society of London. A. Mathematical, Physical and Engineering Sciences 2 Ingenieur-Archiv 2 Journal of the Franklin Institute 2 Journal of Mathematical Analysis and Applications 2 Journal of Mathematical Biology 2 Journal of Mathematical Physics 2 Physics Letters. A 2 Wave Motion 2 Annali di Matematica Pura ed Applicata. Serie Quarta 2 Journal of Differential Equations 2 Journal of Optimization Theory and Applications 2 Numerical Methods for Partial Differential Equations 2 Atti della Accademia Nazionale dei Lincei. Classe di Scienze Fisiche, Matematiche e Naturali. Serie IX. Rendiconti Lincei. Matematica e Applicazioni 2 Applications of Mathematics 2 International Journal of Computer Mathematics 2 Journal of Non-Newtonian Fluid Mechanics 2 SIAM Journal on Applied Mathematics 2 Advances in Engineering Software 2 Calculus of Variations and Partial Differential Equations 2 Journal of Mathematical Sciences (New York) 2 Computational and Applied Mathematics ...and 97 more Journals all top 5 Cited in 41 Fields 3,760 Mechanics of deformable solids (74-XX) 286 Numerical analysis (65-XX) 148 Fluid mechanics (76-XX) 142 Statistical mechanics, structure of matter (82-XX) 110 Biology and other natural sciences (92-XX) 101 Partial differential equations (35-XX) 93 Classical thermodynamics, heat transfer (80-XX) 32 Calculus of variations and optimal control; optimization (49-XX) 32 Operations research, mathematical programming (90-XX) 20 Geophysics (86-XX) 18 Ordinary differential equations (34-XX) 18 Computer science (68-XX) 17 Differential geometry (53-XX) 17 Mechanics of particles and systems (70-XX) 17 Optics, electromagnetic theory (78-XX) 13 Real functions (26-XX) 13 Statistics (62-XX) 10 Dynamical systems and ergodic theory (37-XX) 9 Systems theory; control (93-XX) 8 History and biography (01-XX) 8 Linear and multilinear algebra; matrix theory (15-XX) 8 Integral equations (45-XX) 8 Quantum theory (81-XX) 7 Probability theory and stochastic processes (60-XX) 6 Information and communication theory, circuits (94-XX) 5 Topological groups, Lie groups (22-XX) 4 Special functions (33-XX) 4 Operator theory (47-XX) 3 Difference and functional equations (39-XX) 2 General and overarching topics; collections (00-XX) 2 Combinatorics (05-XX) 2 Functions of a complex variable (30-XX) 2 Integral transforms, operational calculus (44-XX) 2 Convex and discrete geometry (52-XX) 1 Commutative algebra (13-XX) 1 Nonassociative rings and algebras (17-XX) 1 Potential theory (31-XX) 1 Approximations and expansions (41-XX) 1 Harmonic analysis on Euclidean spaces (42-XX) 1 Relativity and gravitational theory (83-XX) 1 Astronomy and astrophysics (85-XX) Citations by Year