×

One-dimensional constitutive SMA model with two martensite variants: analytical and numerical solutions. (English) Zbl 1406.74031

Summary: This paper deals with the one-dimensional modeling of a shape memory alloy (SMA) in order to reproduce the special thermo-mechanical response of the material. In particular, new analytical solutions are developed using a simple one-dimensional SMA model based on the introduction of three phases: tensile martensite, compressive martensite and austenite; the ability to reproduce the pseudo-elastic and shape memory effects; the different behavior in tension and compression; the different elastic properties of the three phases; and the reorientation process of the martensite. The model assumes the martensite volume fractions as internal variables, whose evolution is governed by stress and temperature. Analytical solutions, which take into consideration the axial loads and thermal processes, are developed to solve the axial problem. Furthermore, a numerical procedure is developed in order to time-integrate the kinetic laws that rule the evolution of the internal variables during the phase transformations and a 2-node finite element beam is implemented. Considering the constant and non-constant elastic properties for the three SMA phases, some applications are presented in order to verify the effectiveness of the proposed model and the analytical and numerical solutions. Comparisons with experimental data related to the axial response of SMA wires and laminae are carried out. Finally, a numerical application concerning a SMA lamina, which is subjected to bending load at high temperatures inducing the pseudo-elastic effect in the material, is presented.

MSC:

74A20 Theory of constitutive functions in solid mechanics
74H30 Regularity of solutions of dynamical problems in solid mechanics
74D05 Linear constitutive equations for materials with memory
74M05 Control, switches and devices (“smart materials”) in solid mechanics
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Abeyaratne, R.; Knowles, J. K., Continuum model of thermoelastic solid capable of undergoing phase transformation, Journal of Mechanics and Physics of Solids, 41, 541-571, (1993) · Zbl 0825.73058
[2] Achenbach, M., A model for an alloy with shape memory, International Journal of Plasticity, 5, 371-395, (1989)
[3] (Auricchio, F.; Faravelli, L.; Magonette, G.; Torra, V., Shape Memory Alloys, Advances in Modelling and Applications, (2001), CIMNE Barcelona) · Zbl 1010.74001
[4] Auricchio, F.; Lubliner, J., An uniaxial model for shape-memory alloys, International Journal of Solids and Structures, 34, 3601-3618, (1997) · Zbl 0942.74606
[5] Auricchio, F.; Petrini, L., A three dimensional model describing stress-temperature induced solid phase transformations: solution algorithm and boundary value problems, International Journal for Numerical Methods in Engineering, 61, 807-836, (2004) · Zbl 1075.74599
[6] Auricchio, F.; Reali, A.; Stefanelli, U., A macroscopic 1D model for shape memory alloys including asymmetric behaviors and transformation-dependent elastic properties, Computer Methods in Applied Mechanics and Engineering, 198, 1631-1637, (2009) · Zbl 1227.74037
[7] Auricchio, F.; Sacco, E., A one-dimensional model for superelastic shape-memory alloys with different elastic properties between austenite and martensite, International Journal of Non-Linear Mechanics, 32, 1101-1114, (1997) · Zbl 0906.73006
[8] Auricchio, F.; Sacco, E., A superelastic shape-memory alloy-beam model, Journal of Intelligent Material Systems and Structures, 8, 489-501, (1997)
[9] Auricchio, F.; Sacco, E., A temperature-dependent beam for shape-memory alloys: constitutive modelling, finite-element implementation, and numerical simulations, Computer Methods in Applied Mechanics and Engineering, 174, 171-190, (1999) · Zbl 0956.74022
[10] Bekker, A.; Brinson, L., Temperature-induced phase transformation in shape memory alloy: phase diagram based kinetics approach, Journal of Mechanics and Physics of Solids, 45, 949-988, (1997) · Zbl 0974.74547
[11] Bekker, A.; Brinson, L., Phase diagram based description of the hysteresis of shape memory alloys, Acta Materialia, 46, 3649-3665, (1998) · Zbl 0923.47043
[12] Birman, V., Analysis of an infinite shape memory alloy plate with a circular hole subjected to biaxial tension, International Journal of Solids and Structures, 36, 167-178, (1999) · Zbl 0960.74039
[13] Boyd, J.; Lagoudas, D., A thermodynamic constitutive model for the shape memory alloy materials. part I. the monolithic shape memory alloy, International Journal of Plasticity, 12, 805-842, (1996) · Zbl 0898.73020
[14] Brinson, L., One dimensional constitutive behaviour of shape memory alloys: thermo-mechanical derivation with non-constant functions and redefined martensite internal variable, Journal of Intelligent Material Systems and Structures, 4, 229-242, (1993)
[15] Brinson, L.; Bekker, A.; Hwuang, S., Deformations of shape memory alloys due to the thermo-induced transformation, Journal of Intelligent Material Systems and Structures, 7, 97-107, (1996)
[16] Chang, B.; Shaw, J.; Iadicola, M., Thermodynamics of shape memory allo wire: modeling, experiments, and applications, Continuum Mechanics and Thermodynamics, 18, 83-118, (2006) · Zbl 1149.74381
[17] Chi, Y.; Pence, T.; Tsai, H., Plane stress analysis of a shape memory annular plate subject to edge pressure, Journal De Physique, IV, 112, 245-248, (2003)
[18] Chiozzi, A.; Merlin, M.; Rizzoni, R.; Tralli, A., Experimental comparison for two one-dimensional constitutive models for shape memory alloy wires used in anti-seismic applications, ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers, 4672-4682, (2012)
[19] Evangelista, V.; Marfia, S.; Sacco, E., Phenomenological 3D and 1D consistent models for shape-memory alloy materials, Computational Mechanics, 44, 405-421, (2009) · Zbl 1168.74040
[20] Evangelista, V.; Marfia, S.; Sacco, E., A 3D SMA constitutive model in the framework of finite strain, International Journal for Numerical Methods in Engineering, 81, 761-785, (2010) · Zbl 1183.74173
[21] Govindjee, S.; Kasper, E. P., Computational aspects of one-dimensional shape memory alloy modeling with phase diagrams, Computer Methods in Applied Mechanics and Engineering, 171, 309-326, (1999) · Zbl 0949.74048
[22] Ivshin, I.; Pence, T., A thermodynamical model for one-variant shape memory alloy material, International Journal of Intelligent Material Systems and Structures, 5, 455-473, (1994)
[23] James, R.; Rizzoni, R., Pressurized shape memory thin films, Journal of Elasticity, 59, 399-436, (2000) · Zbl 0990.74038
[24] Khandelwal, A.; Buravalla, V., Models for shape memory alloy behavior: an overview of modeling approaches, International Journal of Structural Changes in Solids, 1, 111-148, (2009)
[25] Kosel, F.; Videnic, T., Generalized plasticity and uniaxial constrained recovery in shape memory alloys, Mechanics of Advanced Materials and Structures, 14, 3-12, (2007)
[26] Lagoudas, D. C., Shape memory alloys: modeling and engineering applications, (2008), Springer New York · Zbl 1225.74005
[27] Liang, C.; Rogers, A., One-dimensional thermomechanical constitutive relations for shape memory materials, Journal of Intelligent Material Systems and Structures, 1, 207-234, (1990)
[28] Liu, Y.; Xie, Z.; Humbbek, J. V.; Delay, L., Asymmetry of stress-strain curves under tension and compression for niti shape memory alloys, Acta Materialia, 46, 4325-4338, (1998)
[29] Marfia, S.; Sacco, E., Analysis of SMA composite laminates using a multiscale modelling technique, International Journal for Numerical Methods in Engineering, 70, 1182-1208, (2007) · Zbl 1194.74046
[30] Marfia, S.; Sacco, E.; Reddy, J., Superelastic and shape memory effects in laminated shape memory alloy beams, AIAA Journal, 41, 100-109, (2003)
[31] Merlin, M., Using niti shape memory alloy wires for the geometry active control in a cooling Fan, (Proceedings of AGS’08-advances in Geomaterials and Structures, Hammamet, Tunisia, May 5-7, 2008, (2008))
[32] Merlin, M.; Rizzoni, R., Design of a polymeric prototype with variable geometry controlled by shape-memory strips, (Proceedings of AGS’10-advances in Geomaterials and Structures, Djerba, Tunisia, May 10-12, 2010, (2010))
[33] Merlin, M.; Rizzoni, R., Thermoelastic transformation behavior of niti thin strips in bending: experiments and modelling, (CMM-2011, Computer Methods in Mechanics, Varsaw, Poland, May 9-12, 2011, (2011))
[34] Merlin, M.; Soffritti, C.; Fortini, A., Study of the heat treatment of niti shape memory alloy strips for the realisation of adaptive deformable structures, Metallurgia Italiana, 103, 17-21, (2011)
[35] Mirzaeifar, R.; DesRoches, R.; Yavari, A., Exact solutions for pure torsion of shape memory alloy circular bars, Mechanics of Materials, 42, 797-806, (2010)
[36] Mirzaeifar, R.; DesRoches, R.; Yavari, A., A combined analytical, numerical, and experimental study of shape-memory-alloy helical springs, International Journal of Solids and Structures, 48, 611-624, (2011) · Zbl 1236.74206
[37] Mirzaeifar, R.; DesRoches, R.; Yavari, A.; Gall, K., A closed-form solution for superelastic shape memory alloy beams subjected to bending, (Proceedings of SPIE - The International Society for Optical Engineering 8342, (2012))
[38] Mirzaeifar, R.; Shakeri, M.; DesRoches, R.; Yavari, A., A semi-analytic analysis of shape memory alloy thick-walled cylinders under internal pressure, Archive of Applied Mechanics, 81, 1093-1116, (2010) · Zbl 1271.74369
[39] Nallathambi, A.; Doraiswamy, S.; Chandrasekar, A.; Srinivasan, S., A 3-species model for shape memory alloys, International Journal of Structural Changes in Solids - Mechanics and Applications, 1, 149-170, (2009)
[40] Paiva, A.; Savi, M. A., Describing internal subloops due to incomplete phase transformations in shape memory alloys, Archive of Applied Mechanics, 74, 637-647, (2005) · Zbl 1119.74515
[41] Paiva, A.; Savi, M. A., An overview of constitutive models for shape memory alloy, Mathematical Problems in Engineering, 1, 111-148, (2009)
[42] Paiva, A.; Savi, M. A.; Braga, A. M.B.; Pacheco, P. M.C. L., A constitutive model for shape memory alloys considering tensile compressive asymmetry and plasticity, International Journal of Solids and Structures, 42, 3439-3457, (2005) · Zbl 1127.74027
[43] Qidwai, M. A.; Lagoudas, D., On thermomechanics and transformation surfaces of polycrystalline niti shape memory alloy material, International Journal of Plasticity, 16, 1309-1343, (2000) · Zbl 1032.74043
[44] Raniecki, B.; Rejzner, J.; Lexcellent, C., Anatomization of hysteresis loops in pure bending of ideal pseudoelastic SMA beams, International Journal of Mechanical Sciences, 43, 1339-1368, (2001) · Zbl 0985.74051
[45] Rizzoni, R., A constrained theory for single crystal shape memory wires with application to restrained recovery, Continuum Mechanics and Thermodynamics, 23, 319-335, (2011) · Zbl 1272.74107
[46] Rizzoni, R.; Merlin, M.; Casari, D., Shape recovery behaviour of niti strips in bending: experiments and modelling, Continuum Mechanics and Thermodynamics, 1-21, (2012)
[47] Rizzoni, R.; Merlin, M.; Mazzanti, V., Martensitic thin wires under restrained recovery: theoretical and experimental aspects, Technische Mechanik, 32, 534-545, (2012)
[48] Simo, J.; Hughes, T. J.R., Computational inelasticity, (1998), Springer-Verlag New York · Zbl 0934.74003
[49] Souza, A. C.; Mamiya, E. N.; Zouain, N., Three-dimensional model for solids undergoing stress-induced phase transformations, European Journal of Mechanics - A/Solids, 17, 789-806, (1998) · Zbl 0921.73024
[50] Tanaka, K.; Kobayashi, S.; Sato, Y., Thermomechanics of transformation pseudoelasticity and shape memory effect in alloys, International Journal of Plasticity, 2, 59-72, (1986)
[51] Wang, J.; Dai, H., An internal-variable rod model for stress-induced phase transitions in a slender SMA layer. I. asymptotic equations and a two-phase solution, Mechanics of Materials, 45, 117-134, (2012)
[52] Wang, J.; Dai, H., An internal-variable rod model for stress-induced phase transitions in a slender SMA layer. II. analytical solutions for the outer loop and inner loops, Mechanics of Materials, 45, 83-102, (2012)
[53] Wu, W.; Gordaninejad, F.; Wirtz, R. A., Modeling and analysis of a shape memory alloy-elastomer composite actuator, Journal of Intelligent Material Systems and Structures, 7, 441-447, (1996)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.