×

Assessment of the service life of structural steels by using degradation models with allowance for fatigue and creep of the material. (English. Russian original) Zbl 1381.74036

J. Appl. Mech. Tech. Phys. 56, No. 6, 995-1006 (2015); translation from Prikl. Mekh. Tekh. Fiz. 56, No. 6, 70-83 (2015).
Summary: A mathematical model is developed within the framework of equations of damaged medium mechanics to describe the processes of viscoplastic straining and damage accumulation in structural steels with allowance for fatigue and creep of the material. A model of damage summation due to interaction of low-cycle fatigue and creep of the material is proposed. Material parameters and scalar functions of equations of mechanics of damaged media are determined. Viscoplastic straining and fatigue-induced damage accumulation in 08Kh18N10T and 12Kh18N9 are studied numerically, and the data obtained are compared with available results of physical experiments.

MSC:

74C99 Plastic materials, materials of stress-rate and internal-variable type
74R99 Fracture and damage
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] G. M. Khazhinskii, “On the Theory of Creep and Long-Term Strength of Metals,” Inzh. Zh., Mekh. Tverd. Tela, No. 6, 290036 (1971).
[2] R. A. Dul’nev and P. I. Kotov, Thermal Fatigue of Metals (Mashinostroenie, Moscow, 1980) [in Russian].
[3] Y. Ohashi, M. Kawai, and T. Kaito, “Inelastic Behavior of Type 316 Stainless Steel under Multiaxial Nonproportional Cyclic Stressings at Elevated Temperature,” Trans. ASME, J. Eng. Mat. Technol. 107 (2), 101-109 (1985).
[4] Y. Ohashi, E. Tanaka, and M. Ooka, “Plastic Deformation Behavior of Type 316 Stainless Steel Subject to Out-of-Phase Strain Cycles,” Trans. ASME, J. Eng. Mater. Technol. 107 (4), 286-292 (1985).
[5] H. S. Lamba and O. M. Sidebottom, “Cyclic Plasticity for Non-Proportional Paths. 1. Cyclic Hardening, Erasure of Memory, and Subsequent Strain Hardening Experiments,” Trans. ASME, J. Eng. Mater. Technol. 100 (1), 645-651 (1976).
[6] D. L. McDowell, “An Experimental Study of the Structure of Constitutive Equations for Nonproportional Cyclic Plasticity,” Trans. ASME, J. Eng. Mater. Technol. 107 (4), 307-315 (1985).
[7] A. G. Kazantsev, “Investigation of Interaction of Low-Cycle Fatigue and Creep under Non-Isothermal Loading,” Probl. Prochn., No. 7, 3-8 (1983).
[8] J. Collins, Failure of Materials in Mechanical Design (Wiley, New York, 1979).
[9] F. M. Mitenkov, Yu. G. Korotkikh, and V. B. Kaidalov, Methodology, Methods, and Tools for Controlling the Service Life of Nuclear Power Plants (Mashinostroenie, Moscow, 2006) [in Russian].
[10] I. A. Volkov and Yu. G. Korotkikh, Equations of State of Damaged Viscoelastoplastic Media (Fizmatlit, Moscow, 2008) [in Russian]. · Zbl 1171.74001
[11] I. A. Volkov and Yu. G. Korotkikh, “Modeling of Complex Plastic Straining of Materials over Arbitrary Paths of Thermal-Force Loading,” Izv. Ross. Akad. Nauk, Mekh. Tverd. Tela, No. 6, 69-83 (2007).
[12] I. A. Volkov, Yu. G. Korotkikh, and I. S. Tarasov, “Modeling Complex Plastic Deformation and Fracture of Metals under Disproportionate Loading,” Prikl. Mekh. Tekh. Fiz. 50 (5), 193-205 (2009) [J. Appl. Mech. Tech. Phys. 50 (5), 891-900 (2009)]. · Zbl 1272.74600
[13] I. A. Volkov, Yu. G. Korotkikh, and D. N. Shishulin, “Principles and Methods of Determining Scalar Material Parameters of the Plastic Flow Theory with Kinematic and Isotropic Hardening,” Vychisl. Mekh. Sploshn. Sred 3 (3), 46-57 (2010).
[14] I. A. Volkov, D. A. Kazakov, and Yu. G. Korotkikh, “Experimental and Theoretical Techniques of Determining Parameters of Equations of Damaged Medium Mechanics with Fatigue and Creep,” Vestn. Perm. Nats. Issled. Politekh. Univ., Mekhanika, No. 2, 30-58 (2012).
[15] S. R. Bodner and U. S. Lindholm, “An Incremental Criterion for Time-Dependent Failure of Materials,” Trans. ASME, J. Eng. Mater. Technol. 100 (2), 140-145 (1976).
[16] J. Lemaitre, “A Continuum Damage Mechanics Model for Ductile Fracture,” Trans. ASME, J. Eng. Mater. Technol. 107 (1), 83-89 (1985).
[17] S. Murakami and T. Imaizumi, “Mechanical Description of Creep Damage and Its Experimental Verification,” J. Mech. Theor. Appl., No. 1, 743-761 (1982). · Zbl 0498.73106
[18] J. L. Chaboche, “Constitutive Equation for Cyclic Plasticity and Cyclic Viscoplasticity,” Int. J. Plasticity 5 (3), 247-302 (1989). · Zbl 0695.73001
[19] J. L. Chaboche, “Une Loi Differentielle d’Endommagement de Fatigue avec Cumulation Non Lineaire,” Rev. Franc. Mec., Nos. 50/51, 71-82 (1974).
[20] M. Bernard-Connoly, T. Bui-Quoc, and A. Biron, “Multilevel Strain Controlled Fatigue on a Type 304 Stainless Steel,” Trans. ASME, J. Eng. Mater. Technol. 105 (3), 188-194 (1983).
[21] T. N. Mozharovskaya, “Program and Technique of Studying Creep and Long-Term Strength of Materials with Allowance for the Stress Deviator Form and Loading History,” Probl. Prochn., No. 11, 83-88 (1984).
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.