×

Statistical identification of parameters for damaged FGM structures with material uncertainties in thermal environment. (English) Zbl 1398.93350

Summary: Considering that the statistic numerical characteristics are often required in the probability-based damage identification and safety assessment of Functionally Graded Material (FGM) structures, an stochastic model updating-based inverse computational method to identify the second-order statistics (means and variances) of material properties as well as distribution of constituents for damaged FGM structures with material uncertainties is presented by using measurable modal parameters of structures. The region truncation-based optimization method is employed to simplify the computational process in stochastic model updating. In order to implement the forward propagation of uncertainties required in the stochastic model updating and avoid large error resulting in the nonconvergence of the iteration process, an algorithm is proposed to compute the covariance between the modal parameters and the identified parameters for damaged FGM structures. The proposed method is illustrated by a numerically simulated damaged FGM beam with continuous spatial variation of material properties and verified by comparing with the Monte-Carlo simulation (MCS) method. The influences of the levels and sources of measured data uncertainties as well as the boundary conditions on the identification results are investigated. The numerical simulation results show the efficiency and effectiveness of the presented method for the identification of material parameter variability by using the measurable modal parameters of damaged FGM structures.

MSC:

93E12 Identification in stochastic control theory
90C15 Stochastic programming
74K10 Rods (beams, columns, shafts, arches, rings, etc.)
65C05 Monte Carlo methods
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Jha, D. K.; Kant, T.; Singh, R. K., A critical review of recent research on functionally graded plates, Composite Structures, 96, 833-849, (2013)
[2] Nguyen, H. X.; Atroshchenko, E.; Nguyen-Xuan, H.; Vo, T. P., Geometrically nonlinear isogeometric analysis of functionally graded microplates with the modified couple stress theory, Computers & Structures, 193, 110-127, (2017)
[3] Reddy, J. N.; Romanoff, J.; Loya, J. A., Nonlinear finite element analysis of functionally graded circular plates with modified couple stress theory, European Journal of Mechanics - A/Solids, 56, 92-104, (2016) · Zbl 1406.74448
[4] Jin, G.; Ye, T.; Wang, X.; Miao, X., A unified solution for the vibration analysis of FGM doubly-curved shells of revolution with arbitrary boundary conditions, Composites Part B: Engineering, 89, 230-252, (2016)
[5] Tang, A.-Y.; Wu, J.-X.; Li, X.-F.; Lee, K. Y., Exact frequency equations of free vibration of exponentially non-uniform functionally graded Timoshenko beams, International Journal of Mechanical Sciences, 89, 1-11, (2014)
[6] Giunta, G.; Crisafulli, D.; Belouettar, S.; Carrera, E., A thermo-mechanical analysis of functionally graded beams via hierarchical modelling, Composite Structures, 95, 676-690, (2013)
[7] Shegokar, N. L.; Lal, A., Stochastic nonlinear bending response of piezoelectric functionally graded beam subjected to thermoelectromechanical loadings with random material properties, Composite Structures, 100, 17-33, (2013)
[8] Wu, D.; Gao, W.; Gao, K.; Tin-Loi, F., Robust safety assessment of functionally graded structures with interval uncertainties, Composite Structures, 180, 664-685, (2017)
[9] Talha, M.; Singh, B. N., Stochastic perturbation-based finite element for buckling statistics of FGM plates with uncertain material properties in thermal environments, Composite Structures, 108, 1, 823-833, (2014)
[10] Lal, A.; Neeranjan Singh, H.; Shegokar, N. L., FEM model for stochastic mechanical and thermal postbuckling response of functionally graded material plates applied to panels with circular and square holes having material randomness, International Journal of Mechanical Sciences, 62, 1, 18-33, (2012)
[11] Shegokar, N. L.; Lal, A., Stochastic finite element nonlinear free vibration analysis of piezoelectric functionally graded materials beam subjected to thermo-piezoelectric loadings with material uncertainties, Meccanica, 49, 5, 1039-1068, (2014) · Zbl 1344.74058
[12] Xu, Y.; Qian, Y.; Chen, J.; Song, G., Stochastic dynamic characteristics of FGM beams with random material properties, Composite Structures, 133, 585-594, (2015)
[13] Yu, Z.; Chu, F., Identification of crack in functionally graded material beams using the p-version of finite element method, Journal of Sound and Vibration, 325, 1-2, 69-84, (2009)
[14] Amirpour, M.; Das, R.; Bickerton, S., An elasto-plastic damage model for functionally graded plates with in-plane material properties variation: Material model and numerical implementation, Composite Structures, 163, 331-341, (2017)
[15] Chiong, I.; Ooi, E. T.; Song, C.; Tin-Loi, F., Computation of dynamic stress intensity factors in cracked functionally graded materials using scaled boundary polygons, Engineering Fracture Mechanics, 131, 210-231, (2014)
[16] Lu, Z. R.; Lin, X. X.; Chen, Y. M.; Huang, M., Hybrid sensitivity matrix for damage identification in axially functionally graded beams, Applied Mathematical Modelling, 41, 604-617, (2017)
[17] Zhou, Z.-G.; Wang, B.; Sun, Y.-G., Investigation of the dynamic behavior of a finite crack in the functionally graded materials by use of the Schmidt method, Wave Motion, 39, 3, 213-225, (2004) · Zbl 1163.74471
[18] Xia, C.-H.; Ma, L., Dynamic behavior of a finite crack in functionally graded materials subjected to plane incident time-harmonic stress wave, Composite Structures, 77, 1, 10-17, (2007)
[19] Bagheri, R.; Ayatollahi, M.; Asadi, E., Dynamic fracture analysis of multiple defects in an imperfect FGM coating-substrate layers, International Journal of Mechanical Sciences, 75, 55-65, (2013)
[20] Egner, H.; Juchno, M.; Kula, M.; Skrzypek, J., Numerical analysis of FG and TBC systems based on thermo-elasto-plastic- damage model, Journal of Thermal Stresses, 30, 9-10, 977-1001, (2007)
[21] Gayen, D.; Chakraborty, D.; Tiwari, R., Finite element analysis for a functionally graded rotating shaft with multiple breathing cracks, International Journal of Mechanical Sciences, 134, 411-423, (2017)
[22] Nakamura, T.; Wang, T.; Sampath, S., Determination of properties of graded materials by inverse analysis and instrumented indentation, Acta Materialia, 48, 17, 4293-4306, (2000)
[23] Bolzon, G.; Maier, G.; Panico, M., Material model calibration by indentation, imprint mapping and inverse analysis, International Journal of Solids and Structures, 41, 11-12, 2957-2975, (2004) · Zbl 1119.74408
[24] Liu, G. R.; Han, X.; Xu, Y. G.; Lam, K. Y., Material characterization of functionally graded material by means of elastic waves and a progressive-learning neural network, Composites Science and Technology, 61, 10, 1401-1411, (2001)
[25] Han, X.; Liu, G. R., Computational inverse technique for material characterization of functionally graded materials, AIAA Journal, 41, 2, 288-295, (2003)
[26] Rahmani, B.; Mortazavi, F.; Villemure, I.; Levesque, M., A new approach to inverse identification of mechanical properties of composite materials: Regularized model updating, Composite Structures, 105, 1160-125, (2013)
[27] Sun, K.; Zhao, Y.; Hu, H., Identification of temperature-dependent thermal—structural properties via finite element model updating and selection, Mechanical Systems and Signal Processing, 52-53, 147-161, (2015)
[28] Mishra, A. K.; Chakraborty, S., Development of a finite element model updating technique for estimation of constituent level elastic parameters of {FRP} plates, Applied Mathematics and Computation, 258, 84-94, (2015) · Zbl 1338.74103
[29] Mishra, A. K.; Chakraborty, S., Inverse detection of constituent level elastic parameters of FRP composite panels with elastic boundaries using finite element model updating, Ocean Engineering, 111, 358-368, (2016)
[30] Reddy, J. N.; Chin, C. D., Thermomechanical analysis of functionally graded cylinders and plates, Journal of Thermal Stresses, 21, 6, 593-626, (1998)
[31] Ferrante, F. J.; Graham-Brady, L. L., Stochastic simulation of non-Gaussian/non-stationary properties in a functionally graded plate, Computer Methods Applied Mechanics and Engineering, 194, 12-16, 1675-1692, (2005) · Zbl 1093.74037
[32] Abu Husain, N.; Haddad Khodaparast, H.; Ouyang, H., Parameter selection and stochastic model updating using perturbation methods with parameter weighting matrix assignment, Mechanical Systems and Signal Processing, 32, 135-152, (2012)
[33] Bakir, P. G.; Reynders, E.; De Roeck, G., Sensitivity-based finite element model updating using constrained optimization with a trust region algorithm, Journal of Sound and Vibration, 305, 1-2, 211-225, (2007)
[34] Xu, Y.; Qian, Y.; Song, G.; Guo, K., Damage detection using finite element model updating with an improved optimization algorithm, Steel and Composite Structures, 19, 1, 191-208, (2015)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.