×

Optimization of composite, stiffened, imperfect panels under combined loads for service in the postbuckling regime. (English) Zbl 0825.73457

MSC:

74P99 Optimization problems in solid mechanics
74E30 Composite and mixture properties
74S05 Finite element methods applied to problems in solid mechanics
74G60 Bifurcation and buckling
74-04 Software, source code, etc. for problems pertaining to mechanics of deformable solids

Software:

PANDA; VICONOPT; STAGS; ADS; CONMIN
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Leissa, A. W., Buckling of laminated composite plates and shell panels, (AFWAL-TR-85-3069 (June 1985), Air Force Wright Aeronautical Laboratories, Wright-Patterson AFB: Air Force Wright Aeronautical Laboratories, Wright-Patterson AFB Ohio 45433) · Zbl 0850.73016
[2] Wiggenraad, J. F.M., Postbuckling of thin-walled composite structures — Design, analysis, and experimental verification, (Memorandum SC-86-013 U (28 February 1986), National Aerospace Laboratory (NLR): National Aerospace Laboratory (NLR) The Netherlands)
[3] Arnold, R. R.; Parekh, J. C., Buckling, postbuckling, and failure of flat and shallow-curved, edge-stiffened composite plates subject to combined axial compression and shear loads, (AIAA Paper AIAA-86-1027-CP, 27th AIAA Structures, Structural Dynamics and Materials Conference (1986)), 769-782
[4] Bushnell, D., PANDA-Interactive program for minimum weight design of stiffened cylindrical panels and shells, Comput. & Structures, 16, 167-185 (1983) · Zbl 0499.73090
[5] Bushnell, D., Theoretical basis of the PANDA computer program for preliminary design of stiffened panels under combined in-plane loads, Comput. & Structures, 27, 541-563 (1987) · Zbl 0619.73101
[6] Bushnell, D., Computerized Buckling Analysis of Shells (1989), Kluwer: Kluwer Dordrecht, reprinted by · Zbl 0919.73084
[7] Baruch, M.; Singer, J., Effect of eccentricity of stiffeners on the general instability of stiffened cylindrical shells under hydrostatic pressure, J. Mech. Engrg. Sci., 5, 23-27 (1963)
[8] Starnes, J. H.; Knight, N. F.; Rouse, M., Postbuckling behavior of selected flat stiffened graphite-epoxy panels loaded in compression, AIAA J., 23, 1236-1246 (1985)
[9] Spier, E. E., On experimental versus theoretical incipient buckling of narrow graphite/epoxy plates in compression, (AIAA Paper 80-0686-CP, 21st AIAA Structures, Dynamics and Materials Conference (1980))
[10] Spier, E. E., Local buckling, postbuckling, and crippling behavior of graphite-epoxy short thin-walled compression members, (NASC-N00019-80-C-0174 (July 1981), Naval Air Systems Command: Naval Air Systems Command Washington, DC)
[11] Renieri, M. P.; Garrett, R. A., Investigation of the local buckling, postbuckling and crippling behavior of graphite epoxy short thin-walled compression members, (MDC-A7091 (July 1981), McDonnell Douglas Corporation: McDonnell Douglas Corporation St. Louis, Missouri)
[12] Renieri, M. P.; Garrett, R. A., Postbuckling fatigue behavior of flat stiffened graphite/epoxy panels under shear loading, (NADC-81-168-60 (July 1982), Naval Air Development Center: Naval Air Development Center Warminster, PA)
[13] Rehfield, L. W.; Reddy, A. D., Observations on compressive local buckling, post-buckling, and crippling of graphite/epoxy airframe structure, (AIAA Paper 86-0923-CP, 27th AIAA Structures, Dynamics and Materials Conference (1986))
[14] Weller, T.; Messer, G.; Libai, A., Repeated buckling of graphite epoxy shear panels with bonded metal stiffeners, (TAE No. 546 (August 1984), Department of Aeronautic Engineering, Technion: Department of Aeronautic Engineering, Technion Haifa, Israel)
[15] Agarwal, B. L., Postbuckling behavior of composite, stiffened, curved panels loaded in compression, Experimental Mech., 22 (1982)
[16] Blaas, C.; Wiggenraad, J. F.M., Development and test verification of the ARIANE 4 interstage \(23\) in CFRP, (AIAA 27th Structures, Structural Dynamics and Materials Conference (1986)), 307-313, Part 1
[17] Thompson, J. M.T.; Tulk, J. D.; Walker, A. C., An experimental study of imperfection-sensitivity in the interactive buckling of stiffened plates, (Budiansky, B., Buckling of Structures (1976), Springer: Springer Berlin), 149-159
[18] Bushnell, D.; Holmes, A. M.C.; Flaggs, D. L.; McCormick, P. J., Optimum design, fabrication, and test of graphite-epoxy, curved, stiffened, locally buckled panels loaded in axial compression, (Elishakoff, I.; etal., Buckling of Structures (1988), Elsevier: Elsevier Amsterdam), 61-131
[19] Bauld, N. R.; Khot, N. S., A numerical and experimental investigation of the buckling behavior of composite panels, Comput. & Structures, 15, 393-403 (1982) · Zbl 0488.73085
[20] Khot, N. S.; Bauld, N. R., Further comparison of the numerical and experimental buckling behaviors of composite panels, Comput. & Structures, 17, 61-68 (1983)
[21] Zhang, Y.; Matthews, F. L., Postbuckling behavior of anisotropic laminated plates under pure shear and shear combined with compressive loading, AIAA J., 22, 281-286 (1984) · Zbl 0536.73037
[22] Almroth, B. O.; Brogan, F. A., The STAGS Computer Code, (NASA CR-2950 (1978), NASA Langley Research Center: NASA Langley Research Center Hampton, VA)
[23] Rankin, C. C.; Stehlin, P.; Brogan, F. A., Enhancements to the STAGS computer code, (NASA CR 4000 (November 1986), NASA Langley Research Center: NASA Langley Research Center Hampton, VA)
[24] Thurston, G. A.; Brogan, F. A.; Shehlin, P., Postbuckling analysis using a general purpose code, AIAA J., 24, 1013-1020 (1986)
[25] Graves-Smith, T. R.; Sridharan, S. A., Finite strip method for the post-locally-buckled analysis of plate structures, Internat. J. Mech. Sci., 20, 833-843 (1978)
[26] Stoll, F.; Gürdal, Z., Nonlinear analysis of compressively loaded linked-plate structures, (AIAA Paper 90-0968-CP, 31st AIAA Structures, Structural Dynamics, and Materials Conference (1990)), 903-913
[27] Stoll, P.; Gürdal, Z.; Starnes, J., A method for the geometrically nonlinear analysis of compressively loaded prismatic composite structures, (Rept CCMS-91-03 (VPI-E-91-01) (February 1991), VPISU Center for Composite Materials and Structures)
[28] Shin, D. K.; Gürdal, Z.; Griffin, O. H., Minimum weight design of laminated composite plates for postbuckling performance, (AIAA Paper 91-9069-CP, 32nd AIAA Structures, Structural Dynamics, and Materials Conference (1991)), 257-266
[29] Riks, E., A finite strip method for the buckling and postbuckling analysis of stiffened panels in wing box structures, (Report NLR CR 89383 L (November 1989), National Aerospace Laboratory (NLR): National Aerospace Laboratory (NLR) The Netherlands)
[30] Anderson, M. S.; Stroud, W. J., General panel sizing computer code and its application to composite structural panels, AIAA J., 17, 892-897 (1979)
[31] Stroud, W. J.; Anderson, M. S., PASCO: Structural panel analysis and sizing code, capability and analytical foundations, (NASA TM-80181 (1981), NASA Langley Research Center: NASA Langley Research Center Hampton, VA)
[32] Stroud, W. J.; Greene, W. H.; Anderson, M. S., Buckling loads of stiffened panels subjected to combined longitudinal compression and shear: Results obtained with PASCO, EAL, and STAGS computer programs, (NASA TP 2215 (January 1984), NASA Langley Research Center: NASA Langley Research Center Hampton, VA)
[33] Dickson, J. N.; Cole, R. T.; Wang, J. T.S., Design of stiffened composite panels in the post-buckling range, (Lenoe, E. M.; Oplinger, D. W.; Burke, J. J., Fibrous Composites in Structural Design (1980), Plenum: Plenum New York), 313-327
[34] Dickson, J. N.; Biggers, S. B.; Wang, J. T.S., Preliminary design procedure for composite panels with open-section stiffeners loaded in the post-buckling range, (Bunsell, A. R.; etal., Advances in Composite Materials (1980), Pergamon: Pergamon Oxford), 812-825
[35] Dickson, J. N.; Biggers, S. B., POSTOP: Postbuckled open-stiffened optimum panels, theory and capability, (NAS1-15949 (May 1982), NASA Langley Research Center: NASA Langley Research Center Hampton, VA)
[36] Butler, R.; Williams, F. W., Optimum design features of VICONOPT, an exact buckling program for prismatic assemblies of anisotropic plates, (AIAA Paper 90-1068-CP, 31st AIAA Structures, Structural Dynamics, and Materials Conference (1990)), 1289-1299
[37] Williams, F. W.; Kennedy, D.; Anderson, M. S., Analysis features of VICONOPT, an exact buckling and vibration program for prismatic assemblies of anisotropic plates, (AIAA Paper 90-0970-CP, 31st AIAA Structures, Structural Dynamics, and Materials Conference (1990)), 920-929
[38] Peng, M.-P.; Sridharan, S., Optimized design of stiffened panels subject to interactive buckling, (31st AIAA Structures, Structural Dynamics, and Materials Conference. 31st AIAA Structures, Structural Dynamics, and Materials Conference, AIAA Paper 90-1067-CP (1990)), 1279-1288
[39] Bushnell, D., PANDA2-Program for minimum weight design of stiffened, composite, locally buckled panels, Comput. & Structures, 25, 469-605 (1987) · Zbl 0603.73001
[40] Vanderplaats, G. N., CONMIN — A FORTRAN program for constrained function minimization, (NASA TM X 62-282 (August 1973), Ames Research Center: Ames Research Center Mofiett Field, CA), version updated in March 1975
[41] Vanderplaats, G. N.; Moses, F., Structural optimization by methods of feasible directions, Comput. & Structures, 3, 739-755 (1973)
[42] Vanderplaats, G. N., ADS — A FORTRAN program for automated design synthesis (January 1987), Engineering Design Optimization, Inc: Engineering Design Optimization, Inc Santa Barbara, CA, Version 2.01
[43] Vanderplaats, G. N.; Sugimoto, H., A general-purpose optimization program for engineering design, Comput. & Structures, 24, 13-21 (1986) · Zbl 0589.73085
[44] Comput. & Structures, 18, 471-536 (1984)
[45] Koiter, W. T., Het Schuifplooiveld by Grote Overshrijdingen van de Knikspanning, (Report X295 (November 1946), National Luchtvaart Laboratorium: National Luchtvaart Laboratorium The Netherlands), (in Dutch).
[46] Bushnell, D., Improvements to PANDA2, Vol. 2 (December 1991-January 1992), Unpublished literature distributed with the PANDA2 computer program.
[47] Bushnell, D., PANDA2.NEWS (November 1991), Unpublished literature distributed with PANDA2, also a PANDA2 file that is kept up-to-date.
[48] Comput. & Structures, 44, 1091-1119 (1992)
[49] Bushnell, D.; Bushnell, W. D., Minimum-weight design of a stiffened panel via PANDA2 and evaluation of the optimized panel via STAGS, (AIAA Paper AIAA-92-2316, 33rd AIAA Structures, Structural Dynamics and Materials Conference (1992)), 2586-2618, submitted to Comput. & Structures.
[50] Bushnell, D., Nonlinear equilibrium of imperfect, locally deformed stringer-stiffened panels under combined in-plane loads, Comput. & Structures, 27, 519-539 (1987) · Zbl 0626.73087
[51] Bushnell, D., Use of PANDA2 to optimize composite, imperfect, stiffened, locally buckled panels under combined in-plane loads and normal pressure, (Hui, D.; Kozik, T. J., Design and analysis of omposite materials vessels, PVP, Vol. 121 (1987), ASME: ASME New York), 21-42
[52] C.C. Rankin et al., STAGS user’s manual (Latest version, on which the work reported here is based, has not yet been released.).; C.C. Rankin et al., STAGS user’s manual (Latest version, on which the work reported here is based, has not yet been released.).
[53] Rankin, C. C.; Brogan, F. A., An element independent corotational procedure for the treatment of large rotations, J. Pressure Vessel Technology, 108, 165-174 (1986)
[54] Stanley, G. M., Continuum-based shell elements, (PhD Dissertation (1985), Stanford University: Stanford University Stanford, CA)
[55] Park, K. C.; Stanley, G. M., A curved \(C_0\) shell element based on assumed natural coordinate strains, J. Appl. Mech., 108, 278-290 (1986) · Zbl 0588.73137
[56] Stanley, G. M.; Park, K. C.; Cabiness, H., The computational structural mechanics testbed structural element processor ES7: Revised ANS shell elements, (NASA CR 4360 (May 1991), NASA Langley Research Center)
[57] (PATRAN-Plus User Manual (September 1989), PDA Engineering: PDA Engineering Costa Mesa, California), Release 2.4 · Zbl 0825.68145
[58] F.A. Brogan, W.D. Bushnell, H. Cabiness and C.C. Rankin, STAGSPP, A postprocessor for STAGS (not released as of this writing).; F.A. Brogan, W.D. Bushnell, H. Cabiness and C.C. Rankin, STAGSPP, A postprocessor for STAGS (not released as of this writing).
[59] Riks, E., Some computational aspects of the stability analysis of nonlinear structures, Comput. Methods Appl. Mech. Engrg., 47, 219-259 (1984) · Zbl 0535.73062
[60] Fan, S.; Kröplin, B.; Geier, B., Buckling, postbuckling and failure behavior of composite-stiffened panels under axial compression, (AIAA Paper AIAA-92-2285, 33rd AIAA Structures, Structural Dynamics and Materials Conference (1992)), 264-273
[61] C. Rankin, E. Riks and F.A. Brogan, Unpublished work on solution of the mode jumping problem by mixed static and dynamic nonlinear continuation (1992).; C. Rankin, E. Riks and F.A. Brogan, Unpublished work on solution of the mode jumping problem by mixed static and dynamic nonlinear continuation (1992).
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.