×

A non-ordinary state-based peridynamic method to model solid material deformation and fracture. (English) Zbl 1236.74012

Summary: In this paper, we develop a new non-ordinary state-based peridynamic method to solve transient dynamic solid mechanics problems. This new peridynamic method has advantages over the previously developed bond-based and ordinary state-based peridynamic methods in that its bonds are not restricted to central forces, nor is it restricted to a Poisson’s ratio of 1/4 as with the bond-based method. First, we obtain non-local nodal deformation gradients that are used to define nodal strain tensors. The deformation gradient tensors are used with the nodal strain tensors to obtain rate of deformation tensors in the deformed configuration. The polar decomposition of the deformation gradient tensors are then used to obtain the nodal rotation tensors which are used to rotate the rate of deformation tensors and previous Cauchy stress tensors into an unrotated configuration. These are then used with conventional Cauchy stress constitutive models in the unrotated state where the unrotated Cauchy stress rate is objective. We then obtain the unrotated Cauchy nodal stress tensors and rotate them back into the deformed configuration where they are used to define the forces in the nodal connecting bonds. As a first example we quasi-statically stretch a bar, hold it, and then rotate it ninety degrees to illustrate the methods finite rotation capabilities. Next, we verify our new method by comparing small strain results from a bar fixed at one end and subjected to an initial velocity gradient with results obtained from the corresponding one-dimensional small strain analytical solution. As a last example, we show the fracture capabilities of the method using both a notched and un-notched bar.

MSC:

74A10 Stress
74A05 Kinematics of deformation
74A45 Theories of fracture and damage
74C15 Large-strain, rate-independent theories of plasticity (including nonlinear plasticity)

Software:

PRONTO3D
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Flanagan, D. P.; Taylor, L. M.: An accurate numerical algorithm for stress integration with finite rotations, Computer methods in applied mechanics and engineering 62, 305-320 (1987) · Zbl 0614.73035 · doi:10.1016/0045-7825(87)90065-X
[2] Kunin, L. A.: Elastic media with microstructure I: One dimensional models, (1982) · Zbl 0527.73002
[3] Lubliner, J.: Plasticity theory, (1990) · Zbl 0745.73006
[4] Macek, R. W.; Silling, S. A.: Peridynamics via finite element analysis, Finite elements in analysis and design 43, 1169-1178 (2007)
[5] Malvern, L. E.: Introduction to the mechanics of a continuous medium, (1969) · Zbl 0181.53303
[6] Navier, C.L.M.H., 1823. Bulletin de la societe philomathique, Paris, p. 177.
[7] Pinsky, P. M.; Ortiz, M.; Pister, K. S.: Numerical integration of rate constitutive equations in finite deformation analysis, Computer methods in applied mechanics and engineering 40, 137-158 (1983) · Zbl 0504.73057 · doi:10.1016/0045-7825(83)90087-7
[8] Prager, W.: Introduction to mechanics of continua, (1961) · Zbl 0094.18602
[9] Silling, S. A.: Reformulation of elasticity theory for discontinuities and long range forces, Journal of the mechanics and physics of solids 48, 175-209 (2000) · Zbl 0970.74030 · doi:10.1016/S0022-5096(99)00029-0
[10] Silling, S. A.; Askari, A.: A meshfree method based on the peridynamic model of solid mechanics, Computers and structures 83, 1526-1535 (2005)
[11] Silling, S. A.; Epton, M.; Weckner, O.; Xu, J.; Askari, A.: Peridynamic states and constitutive modeling, Journal of elasticity 88, 151-184 (2007) · Zbl 1120.74003 · doi:10.1007/s10659-007-9125-1
[12] Silling, S.A., Lehoucq, R.B., 2008. Convergence of peridynamics to classical elasticity theory. Journal of Elasticity (accepted). · Zbl 1159.74316
[13] Taylor, L.M., Flanagan, D.P., 1989. PRONTO 3D a three-dimensional transient solid dynamics program. SAND87-1912, Sandia National Laboratories, Albuquerque, New Mexico.
[14] Zienkiewicz, O. C.: The finite element method, (1977) · Zbl 0435.73072
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.