×

2D and 3D finite element meshing and remeshing. A bibliography (1990-2001). (English) Zbl 0991.65116

Summary: This paper gives a bibliographical review of the finite element meshing and remeshing from the theoretical as well as practical points of view. Topics such as adaptive techniques for meshing and remeshing, parallel processing in the finite element modelling, etc. are also included. The bibliography at the end of this paper contains 1,727 references to papers, conference proceedings and theses/dissertations dealing with presented subjects that were published between 1990 and 2001.

MSC:

65N30 Finite element, Rayleigh-Ritz and Galerkin methods for boundary value problems involving PDEs
74S05 Finite element methods applied to problems in solid mechanics
65M60 Finite element, Rayleigh-Ritz and Galerkin methods for initial value and initial-boundary value problems involving PDEs
65M50 Mesh generation, refinement, and adaptive methods for the numerical solution of initial value and initial-boundary value problems involving PDEs
65N50 Mesh generation, refinement, and adaptive methods for boundary value problems involving PDEs
65Y05 Parallel numerical computation
65-00 General reference works (handbooks, dictionaries, bibliographies, etc.) pertaining to numerical analysis
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] conference proceedings and theses/
[2] Manual, as done in the first part of the (1970)
[3] Specific meshing techniques: advancing front method
[4] Delaunay meshing: Delaunay 2D and 3D triangulations
[5] NURBS-based modelling: 2D and 3D mesh generation from NURBS
[6] Voronoi method: hexahedron mesh generation
[7] conference proceedings, and theses/dissertations retrospectively from (1990)
[8] DOI: 10.1016/0010-4485(94)90088-4 · Zbl 0825.73672
[9] Armstrong C.G., SERC Appl. Comp.-Mech. Eng.
[10] Bathe K.J., Mech. Eng. 120 (7) pp 70– (1998)
[11] DOI: 10.1016/0168-874X(94)00072-N · Zbl 0875.73287
[12] DOI: 10.1016/0956-0521(90)90016-E
[13] Bern M., 31st Symp. Found. Comp. Sci. pp 231–
[14] Bern M., IEEE Trans. Ind. Appl. 27 (1) pp 231– (1991)
[15] DOI: 10.1016/S0022-0000(05)80059-5 · Zbl 0799.65119
[16] DOI: 10.1007/s003660050019 · Zbl 0958.65508
[17] DOI: 10.1002/(SICI)1097-0207(19981130)43:6<1143::AID-NME470>3.0.CO;2-I · Zbl 0944.76071
[18] DOI: 10.1007/BF02241271 · Zbl 0716.65101
[19] DOI: 10.1016/0045-7949(91)90214-7 · Zbl 0766.73040
[20] DOI: 10.1016/0045-7949(92)90477-H
[21] DOI: 10.1002/nme.1620310703 · Zbl 0755.65113
[22] Davies J.B., COMPEL 13 pp 305–
[23] Diekmann R., Sandia Nat. Lab. pp 257– (1996)
[24] Durkee M.C., Ann. Int. Conf. IEEE Med. Biol. Soc., IEEE pp 346–
[25] DOI: 10.1002/(SICI)1097-0207(20000210)47:4<887::AID-NME804>3.0.CO;2-H · Zbl 0944.65125
[26] DOI: 10.1016/0045-7949(90)90164-W · Zbl 0715.73065
[27] DOI: 10.1007/s001630050005
[28] Francois V., 3rd Int. Conf. Ind. Autom. pp 13–
[29] DOI: 10.1051/rphysap:01990002507056700
[30] DOI: 10.1016/0045-7825(91)90017-Z · Zbl 0756.65133
[31] Halpern M., Nat. Lab., Albuquerque, NM pp 399– (1997)
[32] DOI: 10.1016/0167-8396(95)00010-4 · Zbl 0875.65028
[33] Hewett C.J.M., 5th Int. Conf. Civil Struct. Eng. Comp., Edinburgh (CCP) pp 55– (1993)
[34] Jesenik M., Num. Models Ind. Appl. pp 181–
[35] Kadivar M.H., NUMETA 90 pp 1090– (1990)
[36] DOI: 10.1016/0045-7949(92)90284-7 · Zbl 0777.65063
[37] Kaliakin V.N., 9th Conf. Eng. Mech. pp 928–
[38] DOI: 10.1016/0045-7949(90)90368-C
[39] DOI: 10.1016/0013-7944(92)90180-M
[40] Manabe Y., Trans. Inst. Electron. Inf. Commun. Eng. D-II pp 1448– (1996)
[41] Mills R., Comp. Aided Eng. 9 (1) pp 52– (1990)
[42] DOI: 10.1007/BF02943508 · Zbl 05476127
[43] Remacle J.F., Num. Mod. Ind. Appl. pp 217–
[44] Ruppert J., 4th Ann. ACM SIAM Symp. Disc. Algor. pp 83–
[45] Sabin M., Adv. Eng. Software 13 (5) pp 220– (1991)
[46] Schroeder W.J., Prod. Model. CAD Manuf., North-Holland pp 267– (1991)
[47] Shephard M.S., Solv. Large-Scale Prob. Mech. (1993)
[48] DOI: 10.1115/1.3101978
[49] DOI: 10.1016/0045-7825(90)90167-K
[50] Straker F., Trans. Soc. Comp. Simul. 7 (1) pp 67– (1990)
[51] DOI: 10.1016/0045-7949(96)00099-5 · Zbl 0900.73826
[52] DOI: 10.1002/nme.1620361506 · Zbl 0800.73462
[53] Thompson J.F., Surv. Math. Industry 6 (4) pp 289– (1997)
[54] DOI: 10.2514/6.1993-3539
[55] DOI: 10.1007/BF01198730 · Zbl 05474588
[56] DOI: 10.1016/0168-874X(93)90049-V
[57] Woo L.W., Ann. Rev. Prog. Appl. Comp. Electromag., Monterey, CA pp 135– (1995)
[58] Yeo M.F., Comp. Mech.: Conc. Comp., Balkema, Rotterdam pp 1345– (1993)
[59] DOI: 10.1016/0045-7949(93)90177-F
[60] Zhou H., 15th Ann. Int. Conf. Eng. Med. Biol. Soc. 15 pp 1476–
[61] Al-Obaid Y.F., Comp. Eng. Conf. Exhib., ASME pp 301–
[62] DOI: 10.1016/0965-9978(95)00004-G
[63] Aminpour M.A., Str. Dyn. Mater. Conf. Exhib. pp 3014–
[64] Bai B.D., Prob. Appl. pp 313– (1993)
[65] DOI: 10.1002/nme.1620320404 · Zbl 0755.76073
[66] DOI: 10.1016/0899-8248(91)90006-G · Zbl 0744.65074
[67] Boix, E. (1995), “Approximation lineaires des surfaces de R3 et applications”, PhD thesis, Ecole Polytech.Paris.
[68] DOI: 10.1016/0168-874X(91)90040-6
[69] Bui T.D., Prog. Comp. Graph., Ablex Publ. pp 254– (1992)
[70] Buratynski E.K., Int. J. Num. Meth. Eng. 30 (5) pp 931– (1990)
[71] Chen Z., 4th Int. Conf. Comp.-Aided Draft. Design Manuf. pp 596– (1994)
[72] DOI: 10.1002/(SICI)1097-0207(19980215)41:3<499::AID-NME295>3.0.CO;2-3 · Zbl 0912.76026
[73] Coupez T., Num. Grid Gener. Comput. Fluid Dyn. pp 615– (1994)
[74] DOI: 10.1016/S0021-9290(00)00055-5
[75] Cuilliere J.C., 8th Int. Conf. CAD/CAM, Robot. Fact. Future pp 204– (1992)
[76] DOI: 10.1016/S0010-4485(00)00028-2 · Zbl 05860753
[77] DOI: 10.1016/0899-8248(90)90012-Y · Zbl 0717.65095
[78] DOI: 10.1109/20.106431
[79] DOI: 10.1016/0010-4485(95)99800-N · Zbl 0834.65112
[80] DOI: 10.1016/0168-874X(91)90035-W · Zbl 0749.68092
[81] DOI: 10.1016/0965-9978(94)90006-X
[82] Li Y.C., Chinese J. Num. Math. Appl. 18 (2) pp 38– (1996)
[83] DOI: 10.1007/s004660050279 · Zbl 0912.73061
[84] DOI: 10.1145/142675.142720
[85] DOI: 10.1109/20.278790
[86] DOI: 10.1016/0010-4485(95)99800-N · Zbl 0834.65112
[87] DOI: 10.1016/S0965-9978(99)00024-1
[88] Neveu M., Tech. Sci. Inform. 14 (10) pp 1291– (1995)
[89] DOI: 10.1016/S0965-9978(97)00052-5 · Zbl 05470145
[90] DOI: 10.1016/0045-7949(91)90321-C · Zbl 0850.73002
[91] Rassineux, A. (1995), “Maillage automatique tridimensionnel par une technique frontale pour la methode des elements finis”, PhD thesis,Univ. de Nancy, France.
[92] DOI: 10.1109/20.877553
[93] DOI: 10.4203/ccp.45.2.5
[94] Shephard M.S., SCOREC Rep. 29, Rennselaer Polytech. Inst. (1991)
[95] DOI: 10.1016/0045-7825(92)90033-G · Zbl 0828.65133
[96] Shephard M.S., Model. Mesh Gener. Adapt. Num. Meth. PDE pp 67–
[97] Stab, O. (1992), “Maillage automatique tridimentionnel par operations booleenes”, PhD thesis, Ecole desMines de Paris.
[98] DOI: 10.1007/BF01221213
[99] Stephenson M.B., 1990 ASME Int. Comp. Eng. Conf. Exhib. pp 287–
[100] DOI: 10.1016/S0168-874X(96)00027-3 · Zbl 0916.73063
[101] Suzuki K., 4th World Cong. Comput. Mech., Buenos Aires pp 891–
[102] DOI: 10.1299/kikaia.59.1161
[103] Taniguchi T., J. Jpn. Soc. Simul. Tech. 18 (2) pp 82– (1999)
[104] Taniguchi T., Comp. Mech. pp 1283– (1991)
[105] Wang X.R., Transf. Sci. Tech. Prod. Power pp 1071– (1991)
[106] Xue W.M., Acta Mech. Solida Sinica 6 (1) pp 59– (1993)
[107] DOI: 10.1109/20.124045
[108] DOI: 10.1002/1097-0207(20010210)50:4<885::AID-NME57>3.0.CO;2-7 · Zbl 1082.74546
[109] DOI: 10.1002/(SICI)1099-0887(199912)15:12<877::AID-CNM300>3.0.CO;2-W · Zbl 0946.65075
[110] Bajaj C.L., Proc. SPIE 2656 pp 34– (1996)
[111] Bajaj C.L., 5th Meshing Roundtable pp 169–
[112] DOI: 10.1142/S0218195992000159 · Zbl 0759.68085
[113] DOI: 10.1142/9789812831699_0003
[114] Bern M., 8th ACM Symp. Comp. Geom. pp 222–
[115] Bern M., 10th Ann. Symp. Comp. Geom., ACM pp 221–
[116] DOI: 10.1016/0045-7949(90)90131-K
[117] DOI: 10.1002/(SICI)1098-2426(199809)14:5<567::AID-NUM2>3.0.CO;2-G · Zbl 0926.65104
[118] Canann S.A., 3rd Int. Meshing Round Table pp 559–
[119] DOI: 10.1007/BF01198738 · Zbl 05474595
[120] Canann S.A., 7th Int. Meshing Roundtable pp 479–
[121] DOI: 10.1002/1097-0207(20010130)50:3<549::AID-NME35>3.0.CO;2-S · Zbl 1006.76051
[122] DOI: 10.1016/S0045-7949(99)00026-7 · Zbl 1072.74547
[123] DOI: 10.1016/0045-7949(94)90149-X · Zbl 0918.73136
[124] DOI: 10.1137/0727074 · Zbl 0714.65024
[125] DOI: 10.1145/225294.225297 · Zbl 05476542
[126] DOI: 10.1002/nme.1620290613 · Zbl 0717.73093
[127] Dey T.K., Symp. Solid Model. Found. CAD/CAM Appl. pp 431–
[128] DOI: 10.1142/S0218195992000068 · Zbl 0761.68095
[129] DOI: 10.1016/0168-9274(93)90113-6 · Zbl 0776.65007
[130] DOI: 10.1145/142675.142688
[131] DOI: 10.1145/108360.108363 · Zbl 0738.68077
[132] Eppstein D., 3rd Ann. ACM-SIAM Symp. Diser. Algor. pp 48–
[133] DOI: 10.1016/S0045-7825(97)00191-6 · Zbl 0943.65120
[134] DOI: 10.1016/0965-9978(93)90038-U · Zbl 0799.65121
[135] DOI: 10.1002/cnm.1640110302 · Zbl 0817.65153
[136] DOI: 10.1137/S0036142998342628 · Zbl 0965.42022
[137] DOI: 10.1002/nme.1620310607 · Zbl 0825.73812
[138] Frey W.H., SIAM Reg. Conf. Geom. Asp. Indust. Design, WPAFB pp 11– (1992)
[139] Hakopian Y.R., Russ. J. Num. Anal. Math. Modell. 9 (3) pp 201– (1994)
[140] DOI: 10.1002/cnm.1640090703 · Zbl 0782.65139
[141] Joe B., AL, Expert Syst. Symbol Comp., North-Holland pp 215– (1992)
[142] DOI: 10.1137/0916075 · Zbl 0851.65081
[143] DOI: 10.1002/nme.1620310105 · Zbl 0825.73784
[144] Kadivar M.H., 10th IASTED Int. Conf. pp 193– (1992)
[145] Karamete B.K., 5th US Nat. Cong. Comput. Mech. pp 98–
[146] DOI: 10.1002/1097-0207(20000910/20)49:1/2<167::AID-NME928>3.0.CO;2-L · Zbl 0981.65024
[147] DOI: 10.1016/S0378-4754(99)00073-7
[148] DOI: 10.1080/02693799308901970
[149] DOI: 10.1002/cnm.1640110511 · Zbl 0824.65120
[150] DOI: 10.1016/S0045-7825(99)00281-9 · Zbl 0969.65097
[151] Laurent N., Int. Conf. Image Process., ICIP98 pp 223–
[152] DOI: 10.1145/343593.343598
[153] Lee S.S., Comp. Eng., PCC ’93 pp 175– (1993)
[154] DOI: 10.1145/280814.280930
[155] DOI: 10.1002/nme.1620310405 · Zbl 0825.73799
[156] DOI: 10.1016/0013-7944(92)90180-M
[157] DOI: 10.1002/nme.1620380605 · Zbl 0822.65008
[158] DOI: 10.1016/0045-7949(94)90434-0 · Zbl 0854.73068
[159] DOI: 10.1016/S0377-0427(99)00305-2 · Zbl 0947.65018
[160] Masada T., Ann. Symp. Comput. Geom., ACM pp 224–
[161] DOI: 10.1145/142675.142719
[162] Mitchell, S.A. (1993), “Mesh generation with provable quality bounds”, PhD thesis,Cornell Univ. Ithaca, NY.
[163] Mitchell S.A., Ann. Symp. Comput. Geom., ACM pp 48– (1996)
[164] DOI: 10.2493/jjspe.62.1282
[165] Miura K.T., Int. J. Jpn. Soc. Precis. Eng. 30 (4) pp 353– (1996)
[166] Moore D., Symp. Solid Model. Found. CAD/CAM Appl. pp 455– (1991)
[167] DOI: 10.1109/43.806803 · Zbl 05449064
[168] Neugebauer F., Proc., Civil-Comp pp 25– (1997)
[169] Okuda O., Ser A 41 (2) pp 209– (1999)
[170] Owen S.J., 8th Int. Meshing Roundtable, Sandia Nat. Lab. (1999)
[171] Park, J.Y. (1991), “Mesh generation with quasi-equilateral triangulation”, PhD thesis,The Univ. of Michigan, Ann Arbor, MI.
[172] DOI: 10.1109/20.376415
[173] DOI: 10.1002/(SICI)1099-0887(199605)12:5<295::AID-CNM967>3.0.CO;2-7 · Zbl 0862.65070
[174] Plaza A., IFIP Trans. A Comp. Sci. Technol. 12 pp 409– (1992)
[175] DOI: 10.1002/cnm.398 · Zbl 1022.74048
[176] DOI: 10.1145/218013.218084
[177] DOI: 10.1016/S0167-8396(96)00062-3 · Zbl 0906.68166
[178] DOI: 10.1016/0045-7949(94)90274-7 · Zbl 0866.65079
[179] DOI: 10.1016/S0924-0136(00)00691-9
[180] Rivara M.C., 5th Canad. Conf. Comp. Geom. pp 42–
[181] DOI: 10.1090/S0025-5718-96-00772-7 · Zbl 0853.65096
[182] Rivara M.C., 5th US Nat. Cong. Comput. Mech. pp 105– (1999)
[183] DOI: 10.1007/BF01198736 · Zbl 05474594
[184] DOI: 10.1007/BF02187840 · Zbl 0747.52009
[185] Ruppert, J.M. (1992), “Results on triangulation and high quality mesh generation”, PhD thesis,Univ. of California, Berkeley, CA.
[186] DOI: 10.1016/0010-4485(92)90039-D · Zbl 0754.68117
[187] DOI: 10.1016/0010-4485(93)90089-7 · Zbl 0783.65080
[188] DOI: 10.1016/S0377-0427(98)00049-1 · Zbl 0938.65003
[189] DOI: 10.1002/(SICI)1521-4001(200001)80:1<27::AID-ZAMM27>3.0.CO;2-N
[190] DOI: 10.1145/142920.134010
[191] DOI: 10.1002/nme.1620320705 · Zbl 0756.65135
[192] DOI: 10.1145/218013.218095
[193] DOI: 10.1016/S0167-8396(97)00037-X · Zbl 0903.68191
[194] Shostko A.A., 4th World Cong. Comput. Mech., Buenos Aires pp 991–
[195] DOI: 10.1007/BF02510177 · Zbl 0939.65025
[196] Tam T.K.H., Adv. Eng. Software 13 (5) pp 313– (1991)
[197] Tembulkar J.M., 3rd Int. Conf. Quality Assur. Stand. FEMs, NAFEMS.
[198] Tipper J.C., Comp. Tech. Appl.: CTAC-89, Hemisphere, Washington, DC pp 193– (1990)
[199] DOI: 10.1016/S0010-4485(96)00036-X · Zbl 05473860
[200] DOI: 10.1002/(SICI)1099-1204(199901/04)12:1/2<107::AID-JNM322>3.0.CO;2-2 · Zbl 0936.78010
[201] DOI: 10.1016/S0965-9978(98)00095-7 · Zbl 05467457
[202] Wu J., Chinese J. Num. Meth. Appl. 17 (2) pp 21– (1995)
[203] DOI: 10.1016/0168-874X(94)90019-1 · Zbl 0812.65103
[204] Zhang D.X., Chinese J. Num. Math. Appl. 18 (4) pp 34– (1996)
[205] DOI: 10.1016/0021-9991(92)90181-W · Zbl 0746.65081
[206] DOI: 10.1016/0168-9274(94)00029-8 · Zbl 0823.65101
[207] Barker, D.E. (1993), “An object-oriented hierarchical paradigm for integrated parametric design and automated two-dimensional quadrilateral mesh generation”, PhD thesis,The Univ. of Utah, Salt LakeCity, UT.
[208] DOI: 10.1016/0045-7949(95)00315-0 · Zbl 0900.73849
[209] DOI: 10.1016/0010-4485(95)95870-K · Zbl 0828.65134
[210] Bern M., Sandia Nat. Lab. pp 7– (1997)
[211] DOI: 10.1002/nme.1620320410 · Zbl 0755.65111
[212] Blacker T.D., Adv. Eng. Software 13 (5) pp 332– (1991)
[213] Canann S.A., 3rd Int. Meshing Round Table pp 559–
[214] DOI: 10.1007/BF01213591 · Zbl 05471059
[215] Canann S.A., 7th Int. Meshing Roundtable pp 479–
[216] DOI: 10.1016/0045-7949(95)00316-9 · Zbl 0925.65180
[217] De Rus P., 18th FISITA Cong. pp 601–
[218] DOI: 10.1016/0965-9978(93)90038-U · Zbl 0799.65121
[219] DOI: 10.1016/S0924-0136(98)00349-5
[220] DOI: 10.1016/0306-4549(92)90010-9
[221] Hocknell A., IIE-Trans. 31 (7) pp 627– (1999)
[222] DOI: 10.1016/0045-7825(93)90223-K · Zbl 0845.73069
[223] Itoh T., J. Jpn. Soc. Simul. Tech. 18 (2) pp 89– (1999)
[224] DOI: 10.1002/nme.1620310105 · Zbl 0825.73784
[225] Kawamura Y., 3rd World Cong. Comput. Mech. pp G2–
[226] Kinney P., Nat. Lab., Albuquerque, NM pp 449– (1997)
[227] DOI: 10.1111/1467-8659.1530409 · Zbl 05475810
[228] DOI: 10.1016/0168-874X(95)00005-E · Zbl 0875.73296
[229] DOI: 10.1016/0045-7949(94)90070-1 · Zbl 0894.73159
[230] DOI: 10.1016/S0168-874X(96)00085-6 · Zbl 0896.65081
[231] DOI: 10.1016/S0168-874X(99)00026-8 · Zbl 1003.65138
[232] DOI: 10.1016/0045-7949(91)90169-M · Zbl 0850.73359
[233] Lo S.H., Comp. Mech. pp 1309– (1991)
[234] DOI: 10.1016/0045-7949(94)90434-0 · Zbl 0854.73068
[235] DOI: 10.2493/jjspe.62.1282
[236] Miura K.T., Int. J. Jpn. Soc. Precis. Eng. 30 (4) pp 353– (1996)
[237] Mounoury V., Rev. Europ. Elements Finis 4 pp 75– (1995)
[238] DOI: 10.1002/(SICI)1097-0207(19991010)46:4<593::AID-NME690>3.0.CO;2-6 · Zbl 0974.74064
[239] DOI: 10.1142/S0218195900000024 · Zbl 1074.52504
[240] Owen S.J., Nat. Lab., Albuquerque, NM pp 409– (1998)
[241] DOI: 10.1002/(SICI)1097-0207(19990330)44:9<1317::AID-NME532>3.0.CO;2-N · Zbl 0946.74067
[242] DOI: 10.2514/3.10742
[243] DOI: 10.1016/0013-7944(94)E0057-N
[244] Schiffner K., ZAMM 73 (7) pp T693– (1993)
[245] DOI: 10.1002/nme.1620320705 · Zbl 0756.65135
[246] DOI: 10.1016/0168-874X(90)90033-B
[247] Staten M.L., Nat. Lab., Albuquerque, NM. pp 479– (1998)
[248] DOI: 10.1002/nme.1620290712
[249] Tam T.K.H., Adv. Eng. Software 13 (5) pp 313– (1991)
[250] DOI: 10.1016/0045-7949(92)90134-L
[251] DOI: 10.1016/S0927-0256(97)00163-8
[252] DOI: 10.1007/BF01215978 · Zbl 05469977
[253] DOI: 10.1016/0168-874X(94)90019-1 · Zbl 0812.65103
[254] DOI: 10.1016/S0045-7825(99)00033-X · Zbl 0981.74071
[255] Yuge K., 3rd World Cong. Comput. Mech. pp G5– (1994)
[256] DOI: 10.1016/0045-7949(92)90488-L
[257] DOI: 10.1109/20.250781
[258] DOI: 10.1016/S0924-0136(98)00348-3
[259] DOI: 10.1002/nme.1620320411 · Zbl 0755.65118
[260] DOI: 10.1002/cnm.1640090702 · Zbl 0796.65125
[261] DOI: 10.1109/VISUAL.1997.663885
[262] DOI: 10.1002/1097-0207(20010210)50:4<885::AID-NME57>3.0.CO;2-7 · Zbl 1082.74546
[263] DOI: 10.1137/0916074 · Zbl 0841.65098
[264] DOI: 10.1016/S0045-7825(99)00030-4 · Zbl 0981.74081
[265] Baker T.J., AI, Expert Syst. Symbol Comp., North-Holland pp 223– (1992)
[266] Baker T.J., 6th Int. Conf. Num. Grid Gener. pp 337– (1998)
[267] Baker T.J., 5th US Nat. Cong. Comput. Mech. pp 95– (1999)
[268] Benzley S.E., 4th Int. Meshing Roundtable pp 179–
[269] Bern M., 9th Ann. Symp. Comput. Geometry, ACM pp 281–
[270] DOI: 10.1007/s003660050019 · Zbl 0958.65508
[271] DOI: 10.1007/BF02238487 · Zbl 0839.65135
[272] DOI: 10.1002/(SICI)1099-1204(199901/04)12:1/2<129::AID-JNM327>3.0.CO;2-G · Zbl 0936.78011
[273] Briere, Model., Mesh Gener., Adapt. Num. Meth. PDEs pp 97– (1993)
[274] Canann S.A., 7th Int. Meshing Roundtable pp 479–
[275] Chae S.W., 4th Int. Meshing Roundtable pp 305– (1995)
[276] Chae S.W., 4th World Cong. Comput. Mech., Buenos Aires pp 880– (1998)
[277] DOI: 10.1002/(SICI)1099-0887(199701)13:1<33::AID-CNM39>3.0.CO;2-R · Zbl 0873.65103
[278] DOI: 10.1145/177424.177975
[279] Desaulnier W.E., InterPACK ’99 pp 2069–
[280] Field D.A., SIAM Reg. Conf. Geom. Asp. Indust. Design, WPAFB pp 25– (1992)
[281] DOI: 10.1002/nme.1620310302 · Zbl 0825.73792
[282] DOI: 10.1109/20.312702
[283] DOI: 10.1002/(SICI)1097-0207(19971115)40:21<3979::AID-NME251>3.0.CO;2-9 · Zbl 0897.65075
[284] DOI: 10.1002/nme.1620371604 · Zbl 0925.73783
[285] Frey P.J., 5th Meshing Roundtable pp 31–
[286] Garimella R., Sandia Nat. Lab. pp 321– (1995)
[287] Garimella, R.V. (1998), “Anisotropic tetrahedral mesh generation”, PhD thesis, Rensselaer Polytech. Inst., Troy,NY.
[288] DOI: 10.1007/s003660050013 · Zbl 05468409
[289] DOI: 10.1007/PL00007214 · Zbl 1060.68653
[290] DOI: 10.1007/BF01198735
[291] DOI: 10.1002/nme.1620370409 · Zbl 0800.73472
[292] DOI: 10.1016/0010-4485(93)90039-Q · Zbl 0771.65079
[293] DOI: 10.1002/nme.1620380107 · Zbl 0822.65096
[294] DOI: 10.1090/S0025-5718-00-01270-9 · Zbl 1001.65125
[295] Krizek M., 6th Int. Conf. Math. Meth. Eng. pp 269–
[296] DOI: 10.1137/0729031 · Zbl 0755.41003
[297] DOI: 10.1002/(SICI)1098-2426(200005)16:3<327::AID-NUM4>3.0.CO;2-V · Zbl 0957.65012
[298] DOI: 10.1016/0168-874X(91)90035-W · Zbl 0749.68092
[299] DOI: 10.1090/S0025-5718-96-00748-X · Zbl 0858.65120
[300] DOI: 10.1016/0045-7949(91)90058-T · Zbl 0764.65072
[301] DOI: 10.1016/0045-7949(91)90059-U · Zbl 0764.65073
[302] DOI: 10.1016/S0045-7949(96)00399-9 · Zbl 0899.73525
[303] DOI: 10.1007/s004660050279 · Zbl 0912.73061
[304] Meshkat S., 5th US Nat. Cong. Comput. Mech. pp 92– (1999)
[305] DOI: 10.1002/1097-0207(20000910/20)49:1/2<17::AID-NME920>3.0.CO;2-U · Zbl 0989.74080
[306] Meyers R., 7th Int. Meshing Roundtable pp 151–
[307] DOI: 10.1007/s003660050018 · Zbl 0944.65534
[308] Muthukrishnan, S.N. (1993), “Mesh generation and adaptive refinement of tetrahedral elements for three-dimensional finite element method applications”, PhD thesis,The Univ. of Texas, Arlington, TX.
[309] DOI: 10.1002/(SICI)1097-0207(19990410)44:10<1383::AID-NME616>3.0.CO;2-I · Zbl 0941.65012
[310] Olszewski P., 11th Simul. Tech. Conf. pp 99–
[311] DOI: 10.1137/0915070 · Zbl 0807.65123
[312] DOI: 10.1016/S0045-7825(00)00330-3
[313] Owen S.J., ASME pp 123–
[314] DOI: 10.1016/S0045-7825(00)00294-2 · Zbl 1008.76041
[315] DOI: 10.1016/S0045-7825(99)00339-4 · Zbl 0980.74080
[316] DOI: 10.1016/S0045-7825(96)01116-4 · Zbl 0883.65094
[317] DOI: 10.1002/(SICI)1097-0207(19980228)41:4<651::AID-NME304>3.0.CO;2-P · Zbl 0905.65110
[318] Shewchuk J.R., 14th Ann. ACM Symp. Comput. Geom. pp 86–
[319] DOI: 10.1109/VISUAL.1998.745329
[320] DOI: 10.1145/304012.304018
[321] DOI: 10.1016/S0010-4485(00)00040-3 · Zbl 05860759
[322] DOI: 10.1016/S0166-3615(99)00008-1
[323] Tuchinsky P., 6th Int. Meshing Roundtable pp 183– (1997)
[324] Weingarten V.L., Machine Design 66 (8) pp 3– (1994)
[325] DOI: 10.1115/1.2911443
[326] Yuan J.S., Prob. Appl. pp 327– (1993)
[327] DOI: 10.1109/20.250780
[328] DOI: 10.1002/nme.1620320304
[329] Zhou Y., Pacific Graphics ’94 pp 33–
[330] Armstrong C.G., Nat. Lab., Albuquerque, NM pp 277– (1995)
[331] Benzley S., 11th Ann. Symp. Comput. Geom., ACM pp C4–
[332] Benzley S.E., 4th Int. Meshing Roundtable pp 179–
[333] DOI: 10.1007/BF01201859 · Zbl 05473445
[334] DOI: 10.1007/BF01199047
[335] Calvo N.A., 4th World Cong. Comput. Mech., Buenos Aires pp 879– (1998)
[336] DOI: 10.1016/S0045-7825(99)00199-1 · Zbl 0963.65122
[337] DOI: 10.1002/nme.104 · Zbl 0977.74054
[338] Canann, S.A. (1991), “Plastering and optismoothing: new approaches to automated, 3-D hexahedral mesh generation and mesh smoothing”, PhD thesis,Brigham Young Univ., Provo, UT.
[339] Canann S.A., Str. Dyn. Mater. Conf. pp 662–
[340] Chiba N., 5th Meshing Roundtable 96 pp 281–
[341] DOI: 10.1016/S0045-7825(97)00304-6 · Zbl 0945.74065
[342] Clark B.W., Nat. Lab., Albuquerque, NM. pp 321– (1996)
[343] DOI: 10.1002/nme.114 · Zbl 0971.74070
[344] Eppstein D., Ann. Symp. Comput. Geom., ACM pp 58–
[345] Hipp J., 3rd Int. Meshing Roundtable, Sandia Nat. Lab. (1994)
[346] Holmes D.I., Nat. Lab., Albuquerque, NM. pp 141– (1995)
[347] DOI: 10.2514/3.11858 · Zbl 0798.76075
[348] Knupp P., 7th Meshing Roundtable pp 505–
[349] Lai M., 5th US Nat. Cong. Comput. Mech. pp 94–
[350] DOI: 10.1002/1097-0207(20000910/20)49:1/2<261::AID-NME932>3.0.CO;2-G · Zbl 0972.74065
[351] Leland R., 7th Int. Meshing Roundtable pp 515–
[352] DOI: 10.1016/S0045-7949(99)00193-5
[353] DOI: 10.1016/0045-7825(94)00758-F
[354] DOI: 10.1016/S0168-874X(96)00085-6 · Zbl 0896.65081
[355] Liu S., Nat. Lab., Albuquerque, NM. pp 291– (1996)
[356] Liu S.S., Meshing Roundtable 97 pp 217– (1997)
[357] DOI: 10.1115/1.2830213
[358] DOI: 10.1016/S0010-4485(99)00040-8 · Zbl 1053.68746
[359] Meshkat S., 5th US Nat. Cong. Comput. Mech. pp 92– (1999)
[360] DOI: 10.1002/1097-0207(20000910/20)49:1/2<17::AID-NME920>3.0.CO;2-U · Zbl 0989.74080
[361] Meyers R., 7th Int. Meshing Roundtable pp 151–
[362] Min W., Nat. Lab., Albuquerque, NM pp 171– (1997)
[363] Mingwu, L. (1998), “Automatic hexahedral mesh generation by generalized multiple source to multiple target sweeping”, Doctoral thesis,Brigham Young Univ., Provo, UT.
[364] Mingwu L., 5th Meshing Roundtable pp 217–
[365] Mitchell S., 5th MSI Worksh. Comput. Geom.. (1995)
[366] Mitchell S.A., 13th Symp. Theor. Aspects Comp. Sci., STACS pp 465–
[367] DOI: 10.1007/s003660050018 · Zbl 0944.65534
[368] Mounoury V., Rev. Europ. Elements Finis 4 pp 75– (1995)
[369] Mueller-Hannemann M., 7th Int. Meshing Roundtable, Sandia Nat. Lab. (1998)
[370] DOI: 10.1007/s003660050022 · Zbl 0958.65507
[371] DOI: 10.1145/336154.336167 · Zbl 1378.65062
[372] Murdoch, P. (1995), “The spatial twist continuum: a dual representation of the all hexahedral finite element mesh”, PhD thesis,Brigham Young Univ., Provo, UT.
[373] DOI: 10.1016/S0168-874X(97)81956-7 · Zbl 0914.73049
[374] Owen S.J., 8th Int. Meshing Roundtable, Sandia Nat. Lab. (1999)
[375] Owen S.J., 5th US Nat. Cong. Comput. Mech. pp 90– (1999)
[376] DOI: 10.1002/1097-0207(20000910/20)49:1/2<289::AID-NME934>3.0.CO;2-L · Zbl 0959.65137
[377] DOI: 10.1016/S0045-7825(00)00330-3
[378] Owen S.J., AMD 220, ASME pp 123– (1997)
[379] DOI: 10.1002/(SICI)1097-0207(19970115)40:1<111::AID-NME56>3.0.CO;2-K
[380] DOI: 10.1002/nme.1620381910 · Zbl 0835.73080
[381] Scheffer A., 7th Int. Meshing Roundtable, Sandia Nat. Lab.
[382] DOI: 10.1007/BF01198732 · Zbl 05474590
[383] DOI: 10.1016/0167-8396(95)00013-V · Zbl 0875.65027
[384] Schneiders R., 5th Meshing Roundtable pp 205–
[385] DOI: 10.1002/1097-0207(20000910/20)49:1/2<329::AID-NME936>3.0.CO;2-I · Zbl 0991.74082
[386] Sheffer A., Nat. Cong. Comput. Mech., Boulder, CO pp 93– (1999)
[387] DOI: 10.1007/s003660050020 · Zbl 0958.65506
[388] DOI: 10.1002/1097-0207(20000910/20)49:1/2<277::AID-NME933>3.0.CO;2-V · Zbl 0989.74073
[389] Shih B., Meshing Roundtable 97 pp 197– (1997)
[390] DOI: 10.1299/kikaia.62.2428
[391] Tautges T.J., 5th US Nat. Cong. Comput. Mech. pp 87–
[392] DOI: 10.1002/nme.139 · Zbl 1049.74055
[393] DOI: 10.1002/(SICI)1097-0207(19961015)39:19<3327::AID-NME2>3.0.CO;2-H · Zbl 0884.73073
[394] Tuchinsky P., 6th Int. Meshing Roundtable pp 183– (1997)
[395] Wada Y., Nat. Cong. Comput. Mech., Boulder, CO pp 91– (1999)
[396] Weingarten V.L., Machine Design 66 (8) pp 3– (1994)
[397] White D.R., 5th Meshing Roundtable, Sandia Nat. Lab. (1996)
[398] White D.R., 5th US Nat. Cong. Comput. Mech. pp 90– (1999)
[399] DOI: 10.1002/1097-0207(20000910/20)49:1/2<127::AID-NME926>3.0.CO;2-V · Zbl 0962.65099
[400] White D.W., 4th Int. Meshing Roundtable pp 165–
[401] DOI: 10.1002/(SICI)1099-0887(199603)12:3<197::AID-CNM972>3.0.CO;2-Q · Zbl 0853.65127
[402] Armstrong C.G., Adv. Design Automat. 2
[403] Bajaj C.L., 5th Meshing Roundtable pp 169–
[404] Boix, E. (1995), “Approximation lineaires des surfaces de R3 et applications”, PhD thesis, Ecole Polytech.Paris.
[405] DOI: 10.1016/S0764-4442(97)86954-6 · Zbl 0876.65099
[406] Borouchaki H., Nat. Cong. Comput. Mech., Boulder, CO pp 109– (1999)
[407] DOI: 10.1002/1097-0207(20000910/20)49:1/2<233::AID-NME931>3.0.CO;2-G · Zbl 0981.65025
[408] Brown J.M., 1990 ASME Design Tech. Conf., DE 23 pp 265–
[409] DOI: 10.1016/S0168-874X(96)00060-1 · Zbl 0917.73062
[410] DOI: 10.1002/(SICI)1097-0207(19960515)39:9<1475::AID-NME913>3.0.CO;2-W · Zbl 0873.65104
[411] Cavendish J.C., Math. Finite Elem. Appl. VII pp 129– (1991)
[412] Cavendish J.C., Adv. Eng. Software 13 (5) pp 226– (1991)
[413] Chae S.W., Comp. Eng., PCC ’93 pp 169–
[414] Chen Y.J.D., 19th Ann. ASME Design Autom. Conf. pp 7–
[415] DOI: 10.1002/(SICI)1097-0207(20000210)47:4<777::AID-NME797>3.0.CO;2-6 · Zbl 0979.68583
[416] DOI: 10.1016/S0010-4485(97)00085-7 · Zbl 05470932
[417] DOI: 10.1007/BF01215975 · Zbl 05469974
[418] De Cougny H.L., Nat. Lab., Albuquerque, NM. pp 243– (1996)
[419] DOI: 10.1145/225294.225297 · Zbl 05476542
[420] Frey P.J., 6th Int. Meshing Roundtable, Park City. (1997)
[421] DOI: 10.1016/S0168-874X(98)00046-8 · Zbl 0921.73251
[422] DOI: 10.1007/s007910050011 · Zbl 0911.68202
[423] DOI: 10.1002/(SICI)1097-0207(19990510)45:1<101::AID-NME582>3.0.CO;2-4 · Zbl 0939.65020
[424] DOI: 10.1109/2945.506225 · Zbl 05108259
[425] DOI: 10.1111/1467-8659.00260 · Zbl 05469747
[426] DOI: 10.1007/BF01200364 · Zbl 0757.65119
[427] DOI: 10.1007/BF01194321 · Zbl 0771.65078
[428] Hamann B., ZAMM 76 (1) pp 417– (1996)
[429] DOI: 10.1007/s003710050126 · Zbl 0906.68172
[430] Hocknell A., IIE-Trans. 31 (7) pp 627– (1999)
[431] Hua T., 19th Ann. ASME Design Autom. Conf., DE V 65 pp 525– (1993)
[432] DOI: 10.1016/S0010-4485(00)00124-X · Zbl 05860806
[433] Karamete B.K., 5th US Nat. Cong. Comput. Mech. pp 108–
[434] DOI: 10.1002/1097-0207(20010228)50:6<1389::AID-NME75>3.0.CO;2-5 · Zbl 1013.74069
[435] Khan A.I., 5th Int. Conf. Civil Struct. Eng. Comp. pp 63–
[436] Kneen P.W., Comp. Mech.: Conc. Comp., Balkema, Rotterdam pp 1261– (1993)
[437] DOI: 10.1108/02644409710188736 · Zbl 1071.74702
[438] Kolms A., ZAMM 76 (5) pp 261– (1996)
[439] DOI: 10.1002/nme.94 · Zbl 1006.74087
[440] DOI: 10.1016/0045-7949(95)00261-8 · Zbl 0925.65179
[441] DOI: 10.1016/S0168-874X(97)00015-2 · Zbl 0896.65082
[442] DOI: 10.1108/02644400010308080 · Zbl 0957.65011
[443] DOI: 10.1002/1097-0207(20010210)50:4<787::AID-NME51>3.0.CO;2-O · Zbl 0986.65008
[444] DOI: 10.1002/(SICI)1099-0887(199807)14:7<609::AID-CNM172>3.0.CO;2-E · Zbl 0905.73069
[445] DOI: 10.1016/0045-7949(91)90058-T · Zbl 0764.65072
[446] DOI: 10.1002/nme.1620380605 · Zbl 0822.65008
[447] DOI: 10.1108/02644409810208516 · Zbl 0924.65107
[448] DOI: 10.1006/jcph.1996.0115 · Zbl 0862.65010
[449] DOI: 10.1115/1.2829173
[450] Mandal C., 5th ACM Symp. Solid Model. Appl., ACM pp 191–
[451] DOI: 10.1016/S0010-4485(00)00037-3 · Zbl 05860756
[452] DOI: 10.1016/S0045-7949(98)00300-9
[453] Mei Z., J. Beijing Univ. Aeronaut. Astronaut. 23 (2) pp 212– (1997)
[454] Mitchell S., 5th MSI Worksh. Comput. Geom.. (1995)
[455] Mitchell S.A., 13th Symp. Theor. Aspects Comp. Sci., STACS pp 465–
[456] Mueller-Hannemann M., Nat. Lab., Albuquerque, NM pp 293– (1997)
[457] DOI: 10.1145/336154.336167 · Zbl 1378.65062
[458] DOI: 10.1016/0010-4485(95)99800-N · Zbl 0834.65112
[459] DOI: 10.1002/1097-0207(20000910/20)49:1/2<313::AID-NME935>3.3.CO;2-V
[460] DOI: 10.1002/1097-0207(20000910/20)49:1/2<313::AID-NME935>3.0.CO;2-3 · Zbl 0981.65026
[461] DOI: 10.1016/0045-7949(94)00614-9 · Zbl 0900.73978
[462] DOI: 10.1002/nme.1620381807 · Zbl 0844.73079
[463] DOI: 10.1016/0167-8396(93)90046-6 · Zbl 0780.65010
[464] DOI: 10.1016/0010-4485(95)00010-0 · Zbl 05476181
[465] Peters J., Nat. Cong. Comput. Mech., Boulder, CO pp 108– (1999)
[466] DOI: 10.1109/2945.722296 · Zbl 05108376
[467] Rassineux A., Nat. Cong. Comput. Mech., Boulder, CO pp 104– (1999)
[468] DOI: 10.1002/1097-0207(20000910/20)49:1/2<31::AID-NME921>3.0.CO;2-6 · Zbl 0990.74080
[469] DOI: 10.1007/BF01350752 · Zbl 05472187
[470] DOI: 10.1109/2945.489387 · Zbl 05108144
[471] Shimada K., Meshing Roundtable 97 pp 375– (1997)
[472] DOI: 10.1016/S0167-8396(97)00037-X · Zbl 0903.68191
[473] DOI: 10.1299/kikaia.59.2204
[474] DOI: 10.1002/(SICI)1097-0207(19990330)44:9<1359::AID-NME552>3.0.CO;2-B · Zbl 0932.74081
[475] DOI: 10.1016/S0965-9978(98)00127-6 · Zbl 05467458
[476] DOI: 10.1016/0167-8396(95)00012-U · Zbl 1022.68626
[477] DOI: 10.2514/3.10869 · Zbl 0729.76633
[478] DOI: 10.1016/0965-9978(92)90081-P
[479] Taniguchi T., Comp. Mech., Balkema pp 1283– (1991)
[480] Tristano J.R., Meshing Roundtable 98 pp 429– (1998)
[481] DOI: 10.1016/S0010-4485(98)00044-X · Zbl 1055.68606
[482] Walsh J.L., 2nd Int. Conf. Comp. Struct. Tech. pp 61–
[483] DOI: 10.1007/BF01198730 · Zbl 05474588
[484] DOI: 10.1002/(SICI)1097-0207(19991120)46:8<1221::AID-NME745>3.0.CO;2-W · Zbl 0951.74073
[485] Yang W., J. Plasticity Eng. 6 (1) pp 34– (1999)
[486] Zhang D.X., Chinese J. Num. Math. Appl. 18 (4) pp 34– (1996)
[487] DOI: 10.1016/S0045-7949(98)00207-7 · Zbl 0936.74075
[488] Zhao Y.F., Proc. Adv. Design Autom., ASME, New York, NY pp 351– (1994)
[489] DOI: 10.1016/S0045-7949(96)00309-4 · Zbl 0902.73077
[490] DOI: 10.1016/0045-7825(95)00917-5 · Zbl 0882.65110
[491] DOI: 10.1002/(SICI)1099-0887(199912)15:12<877::AID-CNM300>3.0.CO;2-W · Zbl 0946.65075
[492] Banicescu I., High Perform. Comp. Symp., HPC pp 168– (2000)
[493] Barnard S.T., 7th SIAM Conf. Parallel Proc. Sci. Comp. 18 pp 627– (1995)
[494] Barnard S.T., Practice Exper. 8 (3) pp 177– (1994)
[495] DOI: 10.4203/ccp.45.3.3
[496] Bayne L.B., Nat. Cong. Comput. Mech., Boulder, CO pp 102– (1999)
[497] Biswas R., 5th US Nat. Cong. Comput. Mech. pp 200–
[498] DOI: 10.1016/S0307-904X(00)00040-8 · Zbl 1076.65535
[499] Bouhmala N., Appl. Artif. Intell. Eng., CMP, Udine, Italy pp 581– (1995)
[500] DOI: 10.1016/S0965-9978(96)00039-7 · Zbl 05470102
[501] DOI: 10.1002/(SICI)1097-0207(19971130)40:22<4119::AID-NME254>3.0.CO;2-R · Zbl 0899.76264
[502] DOI: 10.1016/0965-9978(96)00021-X · Zbl 05470398
[503] DOI: 10.1109/IPDPS.2000.846070
[504] DOI: 10.1111/1467-8659.00357 · Zbl 05469454
[505] Coupez T., Num. Grid Gener. Comput. Fluid Dyn. pp 615– (1994)
[506] De Cougny, H.L. (1998), “Parallel unstructured distributed three-dimensional mesh generation”, PhD thesis, Rensselaer Polytech. Inst., Troy,NY.
[507] Diekmann R., IRREGULAR ’95, LNCS 980 pp 199–
[508] DOI: 10.1002/(SICI)1096-9128(199801)10:1<53::AID-CPE288>3.0.CO;2-W
[509] DOI: 10.1109/IPPS.1996.508118
[510] Diniz, P. et al. (1995), “Parallel algorithms for dynamically partitioning unstructured grids”, Bailey, D.H. et al. (Eds),SIAM Proc. Ser. 195, SIAM, Philadelphia, PA, pp.615-620. · Zbl 0836.65122
[511] DOI: 10.1177/109434209701100102
[512] Freitag L., AMD 220 pp 37– (1997)
[513] Gaither A., 5th Int. Conf. Num. Grid Gener. pp 731–
[514] DOI: 10.1016/0965-9978(96)00009-9 · Zbl 05470383
[515] DOI: 10.1016/S0965-9978(98)00014-3 · Zbl 05467418
[516] Greenough C., 1994 World Transputer Cong. pp 748– (1994)
[517] DOI: 10.4203/ccp.20.4.5
[518] DOI: 10.1016/0965-9978(96)00008-7 · Zbl 05470385
[519] Hodgson D.C., Parallel Comp. Fluid Mech.
[520] DOI: 10.1016/0167-8191(94)90009-4 · Zbl 0805.68046
[521] DOI: 10.1016/S0168-874X(96)00039-X · Zbl 0897.65074
[522] DOI: 10.1016/S0965-9978(00)00012-0 · Zbl 1003.68545
[523] DOI: 10.1002/(SICI)1097-0207(19970130)40:2<251::AID-NME62>3.0.CO;2-U
[524] DOI: 10.1002/1097-0207(20000910/20)49:1/2<167::AID-NME928>3.0.CO;2-L · Zbl 0981.65024
[525] DOI: 10.1002/1097-0207(20010228)50:6<1389::AID-NME75>3.0.CO;2-5 · Zbl 1013.74069
[526] DOI: 10.1002/(SICI)1097-0207(19960930)39:18<3163::AID-NME995>3.0.CO;2-H · Zbl 0873.73080
[527] Knupp P., 7th Int. Meshing Roundtable pp 449– (1998)
[528] DOI: 10.1002/(SICI)1097-0207(19990510)45:1<37::AID-NME577>3.0.CO;2-F · Zbl 0939.65019
[529] DOI: 10.1007/s003660050021 · Zbl 0958.65510
[530] DOI: 10.1002/(SICI)1097-0207(20000530)48:3<401::AID-NME880>3.0.CO;2-D · Zbl 0964.65140
[531] DOI: 10.1002/(SICI)1097-0207(20000720)48:8<1165::AID-NME940>3.0.CO;2-Y · Zbl 0990.74069
[532] DOI: 10.1002/(SICI)1098-2426(199703)13:2<201::AID-NUM5>3.0.CO;2-T · Zbl 0879.65078
[533] DOI: 10.2514/2.2393
[534] DOI: 10.1002/(SICI)1099-0887(199610)12:10<683::AID-CNM983>3.0.CO;2-1 · Zbl 0862.65051
[535] DOI: 10.1007/BF01198734 · Zbl 05474592
[536] DOI: 10.1016/S0168-874X(96)00038-8 · Zbl 0917.73073
[537] Lohner R., Comp. Meth. Appl. Mech. Eng. 163 (1998)
[538] Lohner R., 5th US Nat. Cong. Comput. Mech. pp 96– (1999)
[539] DOI: 10.1002/1097-0207(20000910/20)49:1/2<219::AID-NME930>3.0.CO;2-3 · Zbl 0970.76058
[540] Lohner R., 28th AIAA Fluid Dyn. Conf..
[541] DOI: 10.1016/S0168-9274(99)00002-1 · Zbl 0951.76040
[542] Lyra P.R.M., 4th World Cong. Comput. Mech., Buenos Aires pp 885–
[543] Manole O., 4th World Cong. Comput. Mech., Buenos Aires pp 886–
[544] DOI: 10.2514/3.12701 · Zbl 0851.76041
[545] DOI: 10.4203/ccp.54.3.1
[546] Meshkat S., 3rd Int. Conf. Num. Grid Gener. pp 841–
[547] Mestres J.C., Adv. Comp. Meth. Str. Mech., CIMNE pp 328– (1996)
[548] Miller G.L., 8th Ann. ACM-SIAM Symp. Discr. Algorithms, ACM pp 538–
[549] DOI: 10.1006/jagm.1998.0990 · Zbl 0931.65117
[550] DOI: 10.1137/S1064827595287638 · Zbl 0958.76051
[551] Morel J.E., Eng. 123 (3) pp 319– (1996)
[552] Neugebauer F., Proc., Civil-Comp pp 25– (1997)
[553] DOI: 10.4203/ccp.45.2.3
[554] Okusanya T., 5th Int. Conf. Num. Grid Gener. pp 719– (1996)
[555] Owen S.J., 7th Int. Meshing Roundtable pp 239–
[556] Owen, S.J. (1999), “Non-simplical unstructured mesh generation”, PhD thesis,Carnegie Mellon Univ., Pittsburg, PA.
[557] Ozturan, C. (1995), “Distributed environment and load balancing for adaptive unstructured meshes”, PhD thesis, Rensselaer Polytech. Inst., Troy,NY.
[558] DOI: 10.1002/(SICI)1097-0207(19990220)44:5<593::AID-NME516>3.0.CO;2-0 · Zbl 0938.65143
[559] DOI: 10.2514/2.2675
[560] DOI: 10.1006/jcph.1993.1097 · Zbl 0777.65064
[561] Rivara M.C., 5th Meshing Roundtable pp 77–
[562] DOI: 10.1002/(SICI)1097-0207(19970930)40:18<3313::AID-NME214>3.0.CO;2-# · Zbl 0980.65144
[563] Rivara M.C., 5th US Nat. Cong. Comput. Mech. pp 105– (1999)
[564] DOI: 10.1108/02644409810231862 · Zbl 0943.74069
[565] DOI: 10.1002/1097-0207(20001210)49:10<1327::AID-NME996>3.0.CO;2-L · Zbl 1004.74076
[566] DOI: 10.1002/1099-0887(200102)17:2<89::AID-CNM357>3.0.CO;2-E · Zbl 0993.65139
[567] Sarrate J., 8th Int. Conf. FEs Fluids, Pineridge Press pp 745–
[568] DOI: 10.1007/978-3-7091-9425-6_3
[569] DOI: 10.1109/VISUAL.1995.480806
[570] Shephard M.S., Neuilly-Sur-Seine pp 6.1–
[571] Shostko A.A., 4th World Cong. Comput. Mech., Buenos Aires pp 991–
[572] DOI: 10.1007/BF01221213
[573] DOI: 10.1016/S0965-9978(00)00051-X · Zbl 02180771
[574] Vassberg J.C., Nat. Cong. Comput. Mech., Boulder, CO pp 92– (1999)
[575] DOI: 10.1002/1097-0207(20000910/20)49:1/2<3::AID-NME919>3.0.CO;2-3 · Zbl 0960.76076
[576] DOI: 10.2514/3.12013 · Zbl 0800.76368
[577] DOI: 10.1108/02644409610153014 · Zbl 0983.74540
[578] Weatherill N.P., Conf. Finite Volumes Complex Appl. pp 77–
[579] Weatherill N.P., 6th Int. Conf. Num. Grid Gener., Greenwich.
[580] DOI: 10.1002/cpe.4330030502
[581] DOI: 10.1108/02644409810225779 · Zbl 0934.65132
[582] DOI: 10.1002/(SICI)1097-0207(19960630)39:12<2055::AID-NME942>3.0.CO;2-2 · Zbl 0881.76079
[583] DOI: 10.1002/(SICI)1097-0207(19990810)45:10<1509::AID-NME643>3.0.CO;2-1 · Zbl 0943.74075
[584] Borouchaki H., 6th Int. Meshing Roundtable, Sandia Nat. Lab.
[585] DOI: 10.1002/1097-0207(20000910/20)49:1/2<233::AID-NME931>3.0.CO;2-G · Zbl 0981.65025
[586] DOI: 10.1002/(SICI)1099-0887(199701)13:1<33::AID-CNM39>3.0.CO;2-R · Zbl 0873.65103
[587] DOI: 10.1007/BF01737163 · Zbl 0831.65128
[588] DOI: 10.1007/s003660050024 · Zbl 0958.65509
[589] Frey P.J., Nat. Lab., Albuquerque, NM pp 31– (1996)
[590] DOI: 10.1016/S0045-7825(97)00222-3 · Zbl 0947.65130
[591] Frykestig, J. (1994), “Advancing front mesh generation techniques with application to the finite element method”, PhD thesis,Chalmers Univ. of Tech., Gothenburg, Sweden.
[592] DOI: 10.1002/nme.1620372103 · Zbl 0816.76045
[593] DOI: 10.1108/02644409910257494 · Zbl 0951.74067
[594] DOI: 10.1016/S0045-7949(98)80096-5 · Zbl 0941.74067
[595] DOI: 10.1016/S0045-7949(98)00215-6
[596] DOI: 10.1002/1097-0207(20000910/20)49:1/2<61::AID-NME923>3.0.CO;2-Y · Zbl 0966.65096
[597] DOI: 10.1016/0045-7949(91)90059-U · Zbl 0764.65073
[598] DOI: 10.1016/0013-7944(92)90180-M
[599] DOI: 10.1007/BF01198734 · Zbl 05474592
[600] Lohner R., 34th Aerospace Sci. Meet. Exhib.
[601] DOI: 10.1002/nme.1620382102 · Zbl 0835.73093
[602] Owen S.J., 5th US Nat. Cong. Comput. Mech. pp 90– (1999)
[603] DOI: 10.1002/1097-0207(20000910/20)49:1/2<289::AID-NME934>3.0.CO;2-L · Zbl 0959.65137
[604] Owen S.J., Meshing Roundtable 98, Sandia Nat. Lab., Albuquerque, NM pp 409– (1998)
[605] DOI: 10.1002/(SICI)1097-0207(19990330)44:9<1317::AID-NME532>3.0.CO;2-N · Zbl 0946.74067
[606] DOI: 10.1016/S0045-7825(99)00339-4 · Zbl 0980.74080
[607] DOI: 10.1016/S0045-7825(96)01116-4 · Zbl 0883.65094
[608] DOI: 10.1002/(SICI)1097-0207(19980228)41:4<651::AID-NME304>3.0.CO;2-P · Zbl 0905.65110
[609] DOI: 10.1002/(SICI)1097-0207(19990330)44:9<1359::AID-NME552>3.0.CO;2-B · Zbl 0932.74081
[610] Tristano J.R., Nat. Lab., Albuquerque, NM pp 429– (1998)
[611] DOI: 10.1016/S0045-7949(98)00042-X · Zbl 0940.74070
[612] Yoon S., Int. Conf. Simul. Semicond. Precess. Devices pp 135–
[613] DOI: 10.1109/20.105028
[614] DOI: 10.1109/20.497496
[615] Atanassov K.T., Adv. Modell. Anal. 33 (2) pp 27– (1998)
[616] Bahreininejad A., Str. Mech., Civil-Comp, Edinburgh pp 173– (1994)
[617] DOI: 10.1016/0965-9978(96)00011-7 · Zbl 05470389
[618] Bohn C.A., Netw. Eng. Syst., Turku, Finland pp 241– (1997)
[619] DOI: 10.1109/20.538619
[620] Cheng G., 1st Int. Conf. Comp. Struct. Technol. 2 pp 63– (1991)
[621] DOI: 10.1016/0045-7949(92)90477-H
[622] DOI: 10.1007/BF02652397
[623] DOI: 10.1016/0166-3615(91)90043-9
[624] Dolsak B., 1st World Cong. Expert Syst. pp 2047–
[625] Dolsak B., AI Eng. 9
[626] Dolsak B., AI EDAM 12 (2) pp 95– (1998)
[627] Dracopoulos D.C., WCNN’96 pp 918–
[628] DOI: 10.1109/20.124047
[629] Eisenberger M., FEN (5) pp 32– (1993)
[630] Eun K., Num. Meth. Therm. Probl. VIII pp 1357–
[631] Gabbert U., Appl. High-Perf. Comp. Eng. IV, CMP, Southampton pp 123– (1995)
[632] DOI: 10.1016/0378-4754(94)90071-X
[633] Jadid M.N., AI EDAM 8 (3) pp 177– (1994)
[634] Jezernik A., 6th World Cong. FEM pp 344–
[635] Kado K., 1992 Ann. Meet. JSME/MMD, No 920-72D pp 61–
[636] Kang, E. (1992), “A knowledge-based approach to automatic finite element mesh generation”, PhD thesis,Purdue Univ., West Lafayette, IN.
[637] Kang E., 1990 ASME Int. Comp. Eng. Conf. Exhib. pp 95– (1990)
[638] DOI: 10.1002/nme.1620350417
[639] DOI: 10.1007/BF01312201
[640] DOI: 10.1109/FIE.1994.580605
[641] Khan A.I., 5th Int. Conf. Civil Str. Eng. pp 81–
[642] DOI: 10.1016/0013-7944(94)E0046-J
[643] DOI: 10.1016/0013-7944(94)E0050-Q
[644] Lin P.S., 1993 Int. Symp. VLSI Tech. pp 138–
[645] DOI: 10.1108/eb023812
[646] DOI: 10.1109/20.250785
[647] DOI: 10.1111/0885-9507.00060
[648] DOI: 10.1299/kikaic.57.3174
[649] Nakao T., IEEE Int. Conf. Evolut. Comp., ICEC’96 pp 861–
[650] DOI: 10.1002/(SICI)1097-0207(19990220)44:5<593::AID-NME516>3.0.CO;2-0 · Zbl 0938.65143
[651] Pham T.D., 4th Int. Conf. Educ. Comp. Meth. Eng. pp 1139– (1992)
[652] Reichert K., Adv. Electr. Eng. Software pp 95–
[653] DOI: 10.1109/20.105027
[654] DOI: 10.1007/BF01312204
[655] Saitou K., Artif. Life IV pp 289– (1994)
[656] Sarzeaud O., Artif. Neural Netw. pp 1313–
[657] Takechi H., Ser C 43 (1) pp 190– (2000)
[658] Turkiyyah, G.M. (1990), “Generation and interpretation of finite element models in a knowledgebased environment”, PhD thesis,Carnegie-Mellon Univ., Pittsburgh, PA.
[659] DOI: 10.1111/j.1467-8667.1993.tb00188.x
[660] Wada Y., Nat. Cong. Comput. Mech., Boulder, CO pp 91– (1999)
[661] Yagawa G., 1990 ASME Int. Comp. Eng. Conf. Exhib. pp 107–
[662] Yagawa G., Trans. Jpn. Soc. Mech. Eng., Ser A 58 (532) (1990)
[663] Yagawa G., Ann. Rep. Eng. Res. Inst. Fac. Eng., Univ. Tokyo (51) pp 143– (1992)
[664] DOI: 10.1007/BF00370013 · Zbl 0755.65117
[665] Yagawa G., 69th JSME Spring Ann. Meet., No 920-17A pp 118–
[666] DOI: 10.1299/kikaia.58.1245
[667] DOI: 10.1299/kikaia.61.652
[668] Yagawa G., Integr. Comp. Aided Eng. 2 (4) pp 265– (1995)
[669] Yoshimura S., 4th World Cong. Comput. Mech., Buenos Aires pp 940–
[670] DOI: 10.1016/S0045-7825(99)00033-X · Zbl 0981.74071
[671] DOI: 10.1111/j.1467-8667.1993.tb00211.x
[672] Zhang K.F., IASTED, Int. Symp. Expert Syst. pp 41– (1990)
[673] DOI: 10.1002/nme.1620320404 · Zbl 0755.76073
[674] Baker T.J., AI, Expert Syst. Symbol Comp., North-Holland pp 223– (1992)
[675] Baker T.J., 5th US Nat. Cong. Comput. Mech. pp 95– (1999)
[676] DOI: 10.1002/cnm.1640101003 · Zbl 0812.65104
[677] Borouchaki H., C. R. Acad. Sci. Paris 318 pp 367– (1994)
[678] DOI: 10.1002/(SICI)1097-0207(19961030)39:20<3407::AID-NME5>3.0.CO;2-C · Zbl 0883.73086
[679] Borouchaki H., Rev. Europ. Elements Finis 5 (3) pp 323– (1996)
[680] DOI: 10.1002/(SICI)1097-0207(19970615)40:11<1957::AID-NME147>3.0.CO;2-6 · Zbl 0884.65143
[681] DOI: 10.1016/0045-7825(95)00854-1 · Zbl 0859.65149
[682] Borouchaki H., 4th Int. Meshing Roundtable pp 3–
[683] DOI: 10.1016/S0168-874X(96)00057-1 · Zbl 0897.65076
[684] DOI: 10.1016/S0168-874X(96)00065-0 · Zbl 0897.65077
[685] Borouchaki H., 6th Int. Meshing Roundtable.
[686] DOI: 10.1002/1097-0207(20000910/20)49:1/2<233::AID-NME931>3.0.CO;2-G · Zbl 0981.65025
[687] Chew L.P., 13th Ann. ACM Symp. Comp. Geom. pp 391–
[688] Chew L.P., Trends Unstruct. Mesh Gener. pp 89–
[689] Chrisochoides N., 5th US Nat. Cong. Comput. Mech. pp 99– (1999)
[690] Chynoweth C., ZAMM 76 (3) pp 339– (1996)
[691] DOI: 10.1137/0727074 · Zbl 0714.65024
[692] DOI: 10.1002/nme.1620371902 · Zbl 0821.65077
[693] DOI: 10.1007/3-540-56939-1_71
[694] Du C., 2nd Int. Conf. Comp. Struct. Tech. pp 187–
[695] DOI: 10.1016/0965-9978(96)00004-X · Zbl 05470381
[696] DOI: 10.1002/(SICI)1099-0887(199809)14:9<871::AID-CNM195>3.0.CO;2-6 · Zbl 0916.65149
[697] DOI: 10.1007/BF02573974 · Zbl 0774.68093
[698] Escobar J.M., 2nd Int. Conf. Comp. Struct. Tech. pp 193– (1994)
[699] DOI: 10.1016/0965-9978(96)00006-3 · Zbl 05470382
[700] DOI: 10.1016/0167-8396(94)00018-N · Zbl 0875.68842
[701] DOI: 10.1109/38.403829 · Zbl 05086624
[702] Field D.A., Adv. Eng. Software 13 (5) pp 263– (1991)
[703] Field D.A., Proc. SPIE 1830 pp 237–
[704] Field D.A., Optim. Tech. Struct. Design, CMP, Southampton pp 95– (1994)
[705] DOI: 10.1002/nme.1620310302 · Zbl 0825.73792
[706] Fortune S., “Voronoi diagrams and Delaunay triangulations. computing in Euclidean geometry (1992) · Zbl 0907.68190
[707] Frey P.J., 5th Meshing Roundtable pp 31–
[708] DOI: 10.1016/S0045-7825(97)00222-3 · Zbl 0947.65130
[709] DOI: 10.1002/(SICI)1097-0207(19971230)40:24<4595::AID-NME274>3.0.CO;2-E · Zbl 0903.65110
[710] DOI: 10.1016/S0168-874X(96)00063-7 · Zbl 0897.65078
[711] DOI: 10.1002/nme.1620330507 · Zbl 0762.65111
[712] DOI: 10.1016/S0168-874X(96)00054-6 · Zbl 0916.73051
[713] DOI: 10.1002/nme.1620370506 · Zbl 0796.73061
[714] DOI: 10.1016/0965-9978(92)90058-N
[715] Hogan, W.R.S. (1994), “An efficient method for finding the Delaunay triangulation in randomly scattered data with applications in contour plotting”, PhD thesis,Tufts Univ., Medford, MA.
[716] DOI: 10.1002/nme.1620310511 · Zbl 0825.73809
[717] DOI: 10.1016/0167-8396(91)90038-D · Zbl 0729.65120
[718] DOI: 10.1137/0914083 · Zbl 0786.65138
[719] DOI: 10.1109/20.79087
[720] DOI: 10.1002/1097-0207(20000910/20)49:1/2<167::AID-NME928>3.0.CO;2-L · Zbl 0981.65024
[721] DOI: 10.1002/nme.91 · Zbl 1011.74073
[722] DOI: 10.1002/(SICI)1099-0887(199712)13:12<941::AID-CNM121>3.0.CO;2-M · Zbl 0896.65097
[723] DOI: 10.1016/0168-874X(95)00010-Q · Zbl 0875.73295
[724] DOI: 10.1002/(SICI)1099-0887(199606)12:6<343::AID-CNM982>3.0.CO;2-O · Zbl 0865.65085
[725] Meshkat S., 3rd Int. Conf. Num. Grid Gener. pp 841–
[726] Miller G.L., 27th ACM Symp. Theory Computing ’95 pp 683–
[727] DOI: 10.1109/APS.1993.385342
[728] Mucke E.P., Ann. Symp. Comput. Geom., ACM pp 274–
[729] DOI: 10.1007/BF01377180 · Zbl 0938.68866
[730] DOI: 10.1007/BF01215416 · Zbl 0852.73006
[731] DOI: 10.1016/S0045-7825(99)00339-4 · Zbl 0980.74080
[732] DOI: 10.1002/nme.1620340323 · Zbl 0758.65073
[733] DOI: 10.1006/jcph.1993.1097 · Zbl 0777.65064
[734] Renka R.J., AI, Expert Syst. Symbol Comp., North-Holland pp 208– (1992)
[735] DOI: 10.1002/(SICI)1097-0207(19970930)40:18<3313::AID-NME214>3.0.CO;2-# · Zbl 0980.65144
[736] Rivara M.C., NM pp 335– (1995)
[737] DOI: 10.1002/(SICI)1097-0207(19970228)40:4<581::AID-NME45>3.0.CO;2-K · Zbl 0883.65126
[738] Rognant L., IEEE Int. Conf. Info. Visual. pp 147–
[739] DOI: 10.1006/jagm.1995.1021 · Zbl 0828.68122
[740] DOI: 10.1016/S0045-7825(98)00374-0 · Zbl 0997.65137
[741] Sapidis, N. (1992), “Domain Delaunay tetrahedrization of arbitrarily shaped curved polyhedra defined in a solid modeling system”, PhD thesis,Univ. of Rochester, Rochester, NY.
[742] DOI: 10.1145/112515.112581
[743] DOI: 10.1016/0167-8396(91)90028-A · Zbl 0743.65110
[744] DOI: 10.1142/S0218195991000219 · Zbl 0736.68079
[745] DOI: 10.1016/0045-7825(93)90006-J · Zbl 0847.73067
[746] Sapidis, N.S. (1993), “Domain Delaunay tetrahedrization of curved polyhedra defined in a solid modeling system”, PhD thesis,The Univ. of Rochester, Rochester, NY.
[747] DOI: 10.1002/nme.1620290105 · Zbl 0719.68086
[748] DOI: 10.1016/S0965-9978(00)00096-X · Zbl 1003.68573
[749] Sheehy D.J., ASM Symp. Solid Model. Found. Appl. pp 201–
[750] DOI: 10.1109/2945.489387 · Zbl 05108144
[751] Shewchuk J.R., ACM pp 124–
[752] Shewchuk J.R., 14th Ann. ACM Symp. Comput. Geom. pp 86–
[753] Shewchuk J.R., 14th Ann. ACM Symp. Comp. Geom..
[754] Shimada K., 3rd World Cong. Comput. Mech. pp G2– (1994)
[755] Sloan S.W., Comp. Meth. Adv. Geomech., Balkema pp 113– (1991)
[756] DOI: 10.1016/0045-7949(93)90239-A · Zbl 0808.65149
[757] DOI: 10.1002/nme.1620371009 · Zbl 0806.65115
[758] DOI: 10.1016/0020-0190(95)00028-B · Zbl 1004.68556
[759] Tam T.K.H., Adv. Eng. Software 13 (5) pp 313– (1991)
[760] Taniguchi T., Trans. JSCE 432 pp 69– (1991)
[761] DOI: 10.1016/0098-3004(93)90062-A
[762] Weatherhill N.P., Comput. Fluid Dyn. 2 pp 961– (1992)
[763] DOI: 10.1002/cnm.1630060206 · Zbl 0696.65083
[764] DOI: 10.1002/nme.1620371203 · Zbl 0806.76073
[765] Weatherill N.P., 6th Int. Conf. Num. Grid Gener. Field Simul.
[766] DOI: 10.1016/S0965-9978(98)00095-7 · Zbl 05467457
[767] DOI: 10.1002/nme.1620371105 · Zbl 0806.65116
[768] DOI: 10.1002/(SICI)1099-0887(199801)14:1<59::AID-CNM129>3.0.CO;2-8 · Zbl 0896.65098
[769] DOI: 10.1016/S0045-7825(97)00322-8 · Zbl 0935.65134
[770] DOI: 10.1299/kikaia.63.2251
[771] Yamamoto H., Trans. Inst. Electron. Inf. Commun. Eng. D-II 78
[772] Yang W., J. Plasticity Eng. 6 (1) pp 34– (1999)
[773] DOI: 10.1109/20.250780
[774] DOI: 10.1016/0045-7825(95)00916-7 · Zbl 0882.65109
[775] DOI: 10.1109/20.106412
[776] Zhou J.M., Prob. Appl. pp 388– (1993)
[777] Cavendish J.C., Math. Finite Elem. Appl. VII pp 129– (1991)
[778] Cavendish J.C., Adv. Eng. Software 13 (5) pp 226– (1991)
[779] DOI: 10.1016/S0965-9978(99)00013-7 · Zbl 05467446
[780] Henderson M.R., Geom. Model. Product Eng. pp 301– (1990)
[781] Hocknell A., IIE-Trans. 31 (7) pp 627– (1999)
[782] Shah J., 1990 ASME Int. Comp. Eng. Conf. Exhib. pp 567– (1990)
[783] Tautges T.J., ASME pp 117–
[784] DOI: 10.1007/BF01206333 · Zbl 0794.65083
[785] Armstrong C.G., Adv. Design Automat. 2
[786] Armstrong C.G., 4th Int. Meshing Roundtable pp 277–
[787] DOI: 10.1007/BF01200364 · Zbl 0757.65119
[788] DOI: 10.1007/BF01194321 · Zbl 0771.65078
[789] Li T.S., Str. Mech., Civil-Comp, Edinburgh pp 165– (1994)
[790] Patrikalakis N.M., 1990 ASME Design Tech. Conf., DE 23 pp 77– (1990)
[791] DOI: 10.1002/(SICI)1097-0207(19970115)40:1<111::AID-NME56>3.0.CO;2-K
[792] DOI: 10.1002/nme.1620381910 · Zbl 0835.73080
[793] DOI: 10.1109/2945.489387 · Zbl 05108144
[794] Sherbrooke E.C., 3rd Symp. Solid Modell. Appl., ACM pp 187–
[795] DOI: 10.1006/gmip.1996.0047 · Zbl 05473522
[796] Tam T.K.H., Adv. Eng. Software 13 (5) pp 313– (1991)
[797] Arabshahi, S. (1991), “Finite element idealisation in a solid modelling environment”, PhD thesis,Univ. of Leeds.
[798] Boender E., Dr thesis (1992)
[799] DOI: 10.1016/0010-4485(94)90025-6 · Zbl 0803.65116
[800] Cox J.J., Symp. Solid Model. Found. CAD/CAM Appl. pp 443–
[801] Delmas J.E., Banff pp 280– (1990)
[802] Dubensky R.G., Int. Cong. Exp., SAE, Detroit, MI pp 1– (1992)
[803] DOI: 10.1016/0167-8396(95)00011-T · Zbl 0875.65029
[804] Gu Y.X., Adv. Comp. Aided Des. Comp. Graph., Beijing pp 705– (1993)
[805] DOI: 10.1007/BF01198735
[806] Holmes D.I., 4th Int. Meshing Roundtable pp 141–
[807] DOI: 10.1016/0045-7825(91)90055-B
[808] DOI: 10.1016/0045-7949(95)00205-7 · Zbl 0918.73167
[809] Li M.Z., Transf. Sci. Tech. Prod. Power pp 1055–
[810] DOI: 10.1016/0045-7949(91)90294-V · Zbl 0850.73310
[811] DOI: 10.1007/BF01201761 · Zbl 0933.68141
[812] DOI: 10.1016/0010-4485(96)00018-8 · Zbl 05475739
[813] Sapidis, N. (1992), “Domain Delaunay tetrahedrization of arbitrarily shaped curved polyhedra defined in a solid modeling system”, PhD thesis,Univ. of Rochester, Rochester, NY.
[814] DOI: 10.1016/0010-4485(92)90039-D · Zbl 0754.68117
[815] Shephard M.S., 4th World Cong. Comput. Mech., Buenos Aires pp 890–
[816] Shephard M.S., Adv. Eng. Software 13 (5) pp 273– (1991)
[817] Amenta N., 8th Ann. ACM-SIAM Symp. Discr. Algorithms, ACM pp 528–
[818] DOI: 10.1016/S0377-0427(98)00018-1 · Zbl 0939.65133
[819] Baker T.J., 6th Int. Conf. Num. Grid Gener. pp 337– (1998)
[820] DOI: 10.1007/BF01742644
[821] Belegundu A.D., Str. Dyn. Mater. Conf. pp 2516– (1992)
[822] DOI: 10.1142/9789812831699_0003
[823] Bouhmala N., Appl. Artif. Intell. Eng., CMP, Udine pp 581– (1995)
[824] DOI: 10.1002/cnm.1630080405 · Zbl 0755.65112
[825] Briere, Model., Mesh Gener., Adapt. Num. Meth. PDEs pp 97– (1993)
[826] Budiman, J. (1990), “The natural shape optimal design method with adaptive mesh generation”, PhD thesis,Arizona State Univ., Tempe, AZ.
[827] Bugeda G., Eur. Conf. New Adv. Comp. Str. Mech., Giens. (1991)
[828] DOI: 10.1016/0956-0521(94)90040-X
[829] Bugeda G., Adv. Comp. Meth. Str. Mech., CIMNE pp 95– (1996)
[830] DOI: 10.1002/(SICI)1097-0207(19971130)40:22<4119::AID-NME254>3.0.CO;2-R · Zbl 0899.76264
[831] DOI: 10.1016/0965-9978(94)90007-8
[832] DOI: 10.1016/0168-874X(93)90056-V · Zbl 0816.65089
[833] Canann S.A., 7th Int. Meshing Roundtable pp 479–
[834] DOI: 10.1016/0045-7825(93)90166-U · Zbl 0800.73405
[835] DOI: 10.1002/(SICI)1099-0887(200001)16:1<1::AID-CNM310>3.0.CO;2-A · Zbl 0960.74060
[836] Coorevits P., Europ. Conf. New Adv. Comp. Struct. Mech., Giens.
[837] DOI: 10.1108/02644409410799245
[838] Coupez T., Nat. Cong. Comput. Mech., Boulder, CO pp 103– (1999)
[839] Cuilliere, J.C. (1993), “Pre-optimisation de maillages automatiques tridimensionnels pour les methodes numeriques - application a l’ingenierie simultanee”, PhD thesis, Inst. Nat. Polytech.Lorraine.
[840] DOI: 10.1007/s003660050017 · Zbl 0943.65142
[841] DOI: 10.1137/0912040 · Zbl 0736.65001
[842] DOI: 10.1007/BF01385784 · Zbl 0724.65006
[843] DOI: 10.1007/BF01743316
[844] De, Model. Mesh Gener. Adapt. Num. Meth. PDE pp 97– (1995)
[845] DOI: 10.1016/S0167-8191(00)00043-0 · Zbl 0948.68076
[846] Eppstein D., 3rd Ann. ACM-SIAM Symp. Diser. Algor. pp 48–
[847] DOI: 10.1002/nme.1620380608 · Zbl 0825.73780
[848] DOI: 10.1016/S0965-9978(00)00057-0 · Zbl 1003.68509
[849] Freitag L., Trends Unstruct. Mesh Gener., AMD 220 pp 37– (1997)
[850] Freitag L.A., 5th US Nat. Cong. Comput. Mech. pp 88– (1999)
[851] DOI: 10.1002/1097-0207(20000910/20)49:1/2<109::AID-NME925>3.0.CO;2-U · Zbl 0962.65098
[852] DOI: 10.1007/s007910050011 · Zbl 0911.68202
[853] DOI: 10.1002/(SICI)1097-0207(19961215)39:23<4039::AID-NME37>3.0.CO;2-C · Zbl 0882.73065
[854] Fuenmayor F.J., 4th World Cong. Comput. Mech., Buenos Aires pp 889–
[855] DOI: 10.1049/el:19951075
[856] Grosso R., IEEE Visual. Conf. pp 387–
[857] Haslinger J., Appl. Math. 37 (2) pp 105– (1992)
[858] Hoppe H., Comp. Graph., Siggraph 27 (3) pp 19– (1993)
[859] DOI: 10.1016/0045-7825(93)90224-L · Zbl 0847.73061
[860] DOI: 10.1002/num.1690110506 · Zbl 0925.65184
[861] Hwang Y.T., Str. Dyn. Mater. Conf., AIAA pp 2227–
[862] Jimack P.K., 2nd Int. Conf. Comp. Struct. Tech. pp 157–
[863] DOI: 10.1016/S0045-7949(96)00148-4 · Zbl 0918.73224
[864] Jimack P.K., Civil-Comp pp 191– (2000)
[865] DOI: 10.1016/S0168-874X(96)00068-6 · Zbl 0918.73257
[866] DOI: 10.1002/(SICI)1097-0207(20000530)48:3<401::AID-NME880>3.0.CO;2-D · Zbl 0964.65140
[867] DOI: 10.1002/(SICI)1097-0207(20000720)48:8<1165::AID-NME940>3.0.CO;2-Y · Zbl 0990.74069
[868] DOI: 10.1016/0168-874X(93)90060-4
[869] Labbe P., Nat. Cong. Comput. Mech., Boulder, CO pp 87– (1999)
[870] Ladeveze P., NUMETA 90 pp 1105–
[871] DOI: 10.1016/0045-7825(92)90057-Q · Zbl 0742.73021
[872] DOI: 10.1051/epjap:2001124
[873] DOI: 10.1002/cnm.1640111105 · Zbl 0833.73058
[874] DOI: 10.1016/S0168-874X(99)00026-8 · Zbl 1003.65138
[875] Liefooghe D., Str. Dyn. Mater. Conf. pp 135– (1990)
[876] DOI: 10.1016/S0045-7949(96)00399-9 · Zbl 0899.73525
[877] Lo S.H., Civil-Comp pp 109– (1998)
[878] DOI: 10.1109/20.497498
[879] Manole O., 4th World Cong. Comput. Mech., Buenos Aires pp 886–
[880] Marcelin J.L., Eur. Conf. New Adv. Comp. Str. Mech., Giens.
[881] DOI: 10.1016/0045-7949(91)90387-2 · Zbl 0775.73040
[882] Miller G.L., 8th Ann. ACM-SIAM Symp. Discr. Algorithms, ACM pp 538–
[883] DOI: 10.1006/jagm.1998.0990 · Zbl 0931.65117
[884] Niu J., 9th Int. Modal Anal. Conf. pp 1098–
[885] DOI: 10.1108/eb023910
[886] Onate E., Math. Finite Elem. Appl. pp 121– (1994)
[887] DOI: 10.1016/0168-874X(91)90004-I · Zbl 0850.73326
[888] Pereira O.J.B.A., Saxe-Coburg pp 149– (1999)
[889] DOI: 10.1016/0045-7949(91)90246-I · Zbl 0850.73287
[890] DOI: 10.1016/S0009-2614(99)00111-6
[891] DOI: 10.1016/S0045-7825(96)01116-4 · Zbl 0883.65094
[892] DOI: 10.1002/(SICI)1097-0207(19980228)41:4<651::AID-NME304>3.0.CO;2-P · Zbl 0905.65110
[893] DOI: 10.1007/s002110050180 · Zbl 0863.65075
[894] Seed G.M., Tech. Devel., Civil-Comp, Edinburgh pp 13– (2000)
[895] Sharif A.M., IEE Coll. Knowl. Discov. Data Mining (310) pp 1– (1998)
[896] Staten M.L., Nat. Lab., Albuquerque, NM pp 479– (1998)
[897] Strouboulis T., Winter Ann. Meet., ASME pp 1–
[898] Tan T.S., 10th Ann. Symp. Comp. Geom., ACM pp 240–
[899] Tan T.S., ZAMM 76 (3) pp 195– (1996)
[900] Tezuka A., 3rd World Cong. Comput. Mech. pp G1–
[901] DOI: 10.1006/cviu.1998.0663 · Zbl 05470458
[902] DOI: 10.1002/nme.1620380306 · Zbl 0821.65075
[903] Vanti M.G., IEEE CEFC ’96 pp 250–
[904] DOI: 10.1109/20.582612
[905] DOI: 10.1177/109434209500900403
[906] DOI: 10.1016/0045-7949(96)00117-4 · Zbl 0900.73517
[907] DOI: 10.1002/(SICI)1097-0207(19960630)39:12<2055::AID-NME942>3.0.CO;2-2 · Zbl 0881.76079
[908] DOI: 10.1016/0045-7949(92)90488-L
[909] Zhang H., “An algorithm for the optimization of directionally stretched (1994) · Zbl 0806.76074
[910] DOI: 10.2514/3.49077
[911] DOI: 10.4203/csets.1.9
[912] DOI: 10.1007/BF01198735
[913] DOI: 10.1016/0045-7825(95)00918-3 · Zbl 0882.65111
[914] Mei Z., J. Beijing Univ. Aeronaut. Astronaut. 23 (2) pp 212– (1997)
[915] Peters J., Nat. Cong. Comput. Mech., Boulder, CO pp 108– (1999)
[916] Peters T.J., IEEE Antennas Prop. Int. Symp. pp 1390–
[917] DOI: 10.1007/s003660050012 · Zbl 05468408
[918] DOI: 10.1016/S0167-8396(96)00062-3 · Zbl 0906.68166
[919] DOI: 10.1016/S0924-0136(00)00691-9
[920] DOI: 10.4203/ccp.53.7.3
[921] DOI: 10.1016/0167-8396(95)00012-U · Zbl 1022.68626
[922] DOI: 10.1016/0045-7825(95)00917-5 · Zbl 0882.65110
[923] Bern M., WADS’93 pp 188–
[924] Carey G.F., 5th US Nat. Cong. Comput. Mech. pp 206– (1999)
[925] Chen T., Simul. Semicond. Dev. Proc. 6 pp 270–
[926] Flaherty J.E., Grid Gener. Adapt. Algor., IMA Math. Appl. pp 113–
[927] Freitag L., 5th US Nat. Cong. Comput. Mech. pp 205– (1999)
[928] DOI: 10.1002/(SICI)1097-0207(19990610)45:4<447::AID-NME592>3.0.CO;2-# · Zbl 0947.76050
[929] DOI: 10.1016/0045-7949(90)90098-M
[930] DOI: 10.1109/43.248082 · Zbl 05448256
[931] DOI: 10.1016/0010-4485(93)90039-Q · Zbl 0771.65079
[932] DOI: 10.1007/s004660050478 · Zbl 0956.65113
[933] DOI: 10.1145/343593.343598
[934] DOI: 10.1016/S0045-7825(99)00378-3 · Zbl 1003.76072
[935] DOI: 10.1299/kikaic.57.3174
[936] DOI: 10.1002/nme.1620340323 · Zbl 0758.65073
[937] DOI: 10.1007/BF01230440
[938] Schneiders R., 5th Meshing Roundtable pp 205–
[939] DOI: 10.1002/nme.1620290105 · Zbl 0719.68086
[940] DOI: 10.1002/nme.1620320406 · Zbl 0755.65116
[941] Shephard M.S., CRC Handbook Grid Generat.
[942] Simone, M.L. (1998), “A distributed octree data structure and algorithms for scientific modeling on distributed memory processors”, PhD thesis, Rensselaer Polytech. Inst., Troy,NY.
[943] Wang C.J., 3rd Int. Conf. Quality Assur. Stand. FEMs, NAFEMS. (1991)
[944] Weatherill N.P., NUMETA 90 pp 1167– (1990)
[945] Wendt J., Proc. VII, MMMS pp 459– (1995)
[946] Johnston, B.P. (1991), “A normal offsetting technique for the fully automatic generation of meshes in two and three dimensions”, PhD thesis, Worcester Polytech. Inst., Worcester,MA.
[947] DOI: 10.1002/nme.1620330212 · Zbl 0756.65134
[948] DOI: 10.1002/nme.1620361007 · Zbl 0782.65140
[949] Krause J., 5th US Nat. Cong. Comput. Mech. pp 97– (1999)
[950] DOI: 10.1002/1097-0207(20000910/20)49:1/2<51::AID-NME922>3.0.CO;2-1 · Zbl 0966.65095
[951] DOI: 10.1016/S0168-874X(96)00056-X · Zbl 0916.73064
[952] Bern M., 6th Int. Meshing Roundtable pp 7– (1997)
[953] DOI: 10.1002/1097-0207(20000910/20)49:1/2<61::AID-NME923>3.0.CO;2-Y · Zbl 0966.65096
[954] Miller G.L., Nat. Lab., Albuquerque, NM pp 47– (1996)
[955] Shimada, K. (1993), “Physically based mesh generation: automated triangulation of surfaces and volumes via bubble packing”, PhD thesis,MIT, Cambridge, MA.
[956] Shimada K., Meshing Roundtable 97 pp 375– (1997)
[957] Shimada K., 3rd World Cong. Comput. Mech. pp G2– (1994)
[958] DOI: 10.1145/218013.218095
[959] DOI: 10.1002/(SICI)1097-0207(19991120)46:8<1221::AID-NME745>3.0.CO;2-W · Zbl 0951.74073
[960] DOI: 10.1007/BF01201859 · Zbl 05473445
[961] DOI: 10.1007/BF01199047
[962] Blacker T.D., Rep No SAND90-0249, Sandia Nat. Lab. (1990)
[963] DOI: 10.1002/nme.1620320410 · Zbl 0755.65111
[964] Blacker T.D., Adv. Eng. Software 13 (5) pp 332– (1991)
[965] Canann, S.A. (1991), “Plastering and optismoothing: new approaches to automated, 3-D hexahedral mesh generation and mesh smoothing”, PhD thesis,Brigham Young Univ., Provo, UT.
[966] Canann S.A., Str. Dyn. Mater. Conf. pp 662–
[967] DOI: 10.1002/(SICI)1097-0207(19960515)39:9<1475::AID-NME913>3.0.CO;2-W · Zbl 0873.65104
[968] Hipp J., 3rd Int. Meshing Roundtable, Sandia Nat. Lab. (1994)
[969] Leland R., 7th Int. Meshing Roundtable pp 515–
[970] DOI: 10.1007/BF01215978 · Zbl 05469977
[971] Chynoweth C., ZAMM 76 (3) pp 339– (1996)
[972] DOI: 10.1145/304012.304029
[973] George P.L., Adv. Eng. Software 13 (5) pp 303– (1991)
[974] Kobayashi M., Ser II 35 (3) pp 337– (1992)
[975] Martini D., Pixel Comp. Graph. CAD/CAM Image Proc. 17 (1) pp 5– (1996)
[976] DOI: 10.1002/(SICI)1097-0207(19970115)40:1<111::AID-NME56>3.0.CO;2-K
[977] DOI: 10.1002/nme.1620381910 · Zbl 0835.73080
[978] DOI: 10.1016/S0965-9978(00)00096-X · Zbl 1003.68573
[979] DOI: 10.1002/1097-0207(20000910/20)49:1/2<329::AID-NME936>3.0.CO;2-I · Zbl 0991.74082
[980] Sheffer A., Nat. Lab., Albuquerque, NM pp 98– (1998)
[981] Sheffer A., Nat. Cong. Comput. Mech., Boulder, CO pp 93– (1999)
[982] DOI: 10.1007/s003660050020 · Zbl 0958.65506
[983] DOI: 10.1016/0098-3004(93)90062-A
[984] DOI: 10.1016/S0965-9978(98)00095-7 · Zbl 05467457
[985] Aftosmis M.J., 35th AIAA Aerospace Sci. Meet. Exhib.
[986] Alliez P., 7th Pacific Conf. Comp. Graph. Appl. pp 292–
[987] Aminpour M.A., Str. Dyn. Mater. Conf. Exhib., AIAA pp 856–
[988] DOI: 10.1137/0731037 · Zbl 0807.65122
[989] DOI: 10.1007/s002110050216 · Zbl 0878.65097
[990] DOI: 10.1002/(SICI)1099-0887(199607)12:7<373::AID-CNM985>3.0.CO;2-8 · Zbl 0865.65086
[991] DOI: 10.1002/nme.1620382206 · Zbl 0837.76071
[992] DOI: 10.1002/(SICI)1097-0207(19970515)40:9<1573::AID-NME128>3.0.CO;2-9
[993] DOI: 10.1103/RevModPhys.72.1041
[994] Bernardi C., Comp. Rend. Acad. Sci, Ser I 320 (3) pp 373– (1995)
[995] Bossen F.J., 5th Meshing Roundtable pp 375– (1996)
[996] DOI: 10.1002/nme.1620330205 · Zbl 0756.65132
[997] Cardew G.E., Int. Computers Eng. pp 401– (1995)
[998] Chen Y.J.D., 19th Ann. ASME Design Autom. Conf. pp 7–
[999] DOI: 10.1002/(SICI)1099-0887(200001)16:1<1::AID-CNM310>3.0.CO;2-A · Zbl 0960.74060
[1000] DOI: 10.1007/BF01221211 · Zbl 05471768
[1001] Dohrmann C.R., 5th US Nat. Cong. Comput. Mech. pp 162–
[1002] DOI: 10.1002/(SICI)1097-0207(20000220)47:5<1057::AID-NME821>3.0.CO;2-G · Zbl 0959.74064
[1003] DOI: 10.1002/(SICI)1097-0207(20000620)48:5<655::AID-NME893>3.0.CO;2-D · Zbl 0955.74059
[1004] Dohrmann C.R., 5th US Nat. Cong. Comput. Mech. pp 280–
[1005] Doi A., Trans. Inst. Electron. Inf. Commun. Eng. D-II 82 (1) pp 162– (1999)
[1006] DOI: 10.1002/nme.1620381908 · Zbl 0835.73073
[1007] DOI: 10.1002/nme.1620372009 · Zbl 0825.76427
[1008] DOI: 10.1016/0965-9978(93)90038-U · Zbl 0799.65121
[1009] Fine L., Nat. Cong. Comput. Mech., Boulder, CO pp 107– (1999)
[1010] DOI: 10.1002/1097-0207(20000910/20)49:1/2<83::AID-NME924>3.0.CO;2-N · Zbl 0989.74068
[1011] Flasinski M., Comp. Assist. Mech. Eng. Sci. 3 (3) pp 191– (1996)
[1012] DOI: 10.1016/S0045-7949(98)00213-2 · Zbl 0937.65133
[1013] Folwell N.T., Sandia Nat. Lab. pp 365– (1998)
[1014] DOI: 10.1007/s003660050024 · Zbl 0958.65509
[1015] DOI: 10.1142/S0218195900000218 · Zbl 1074.68639
[1016] DOI: 10.1002/(SICI)1099-0887(199711)13:11<875::AID-CNM111>3.0.CO;2-H · Zbl 0902.76059
[1017] Gilbert J.R., IEEE Symp. Parallel Distrib. Process. pp 418–
[1018] Gong J., IEEE Antennas Prop. Soc. Int. Symp., Newport Beach pp 80– (1995)
[1019] DOI: 10.1108/02644409710188600 · Zbl 1071.74700
[1020] DOI: 10.1016/0168-874X(96)83886-8 · Zbl 0875.73308
[1021] DOI: 10.1016/S0010-4485(98)00035-9 · Zbl 1083.65503
[1022] DOI: 10.1002/(SICI)1097-0207(19990130)44:3<313::AID-NME502>3.0.CO;2-V · Zbl 0941.74063
[1023] Hoppe H., Proc. SIGGRAPH ’96 pp 99–
[1024] Hoppe H., SIGRAPH’97 pp 189–
[1025] DOI: 10.1007/BF01206336 · Zbl 0794.65084
[1026] Judt, B. (1992), “Geometrische und topologische Modellierung fur Finite-Elemente-Analysen”, PhD thesis,Univ. Gesamthochschule Essen, Germany.
[1027] DOI: 10.1016/0045-7949(95)00272-3 · Zbl 0925.65199
[1028] DOI: 10.1002/1099-0887(200006)16:6<379::AID-CNM332>3.0.CO;2-G · Zbl 0956.65112
[1029] Kaveh A., Asian J. Struct. Eng. 1 (4) pp 313– (1995)
[1030] Kaveh A., Civil-Comp pp 289– (1996)
[1031] DOI: 10.1016/S0141-0296(97)00047-3
[1032] DOI: 10.1016/S0965-9978(98)00100-8 · Zbl 05469583
[1033] DOI: 10.1115/1.2826884
[1034] DOI: 10.1145/218013.218097
[1035] Knapek S., Situ 22 (1) pp 35– (1998)
[1036] DOI: 10.1109/74.730535
[1037] DOI: 10.1002/(SICI)1097-0207(19961030)39:20<3519::AID-NME12>3.0.CO;2-O · Zbl 0881.73128
[1038] DOI: 10.1007/BF02238357 · Zbl 0854.68027
[1039] DOI: 10.1002/cnm.1630080706 · Zbl 0775.73271
[1040] DOI: 10.1109/CEC.1999.781921
[1041] Langham A.E., Morgan Kaufmann Publ. pp 1602– (1999)
[1042] DOI: 10.1016/0013-7944(92)90082-P
[1043] DOI: 10.1002/nme.1620380308 · Zbl 0821.65076
[1044] DOI: 10.1016/0956-0521(91)90042-4
[1045] DOI: 10.1002/nme.1620380605 · Zbl 0822.65008
[1046] DOI: 10.1002/(SICI)1099-0887(199610)12:10<599::AID-CNM1>3.0.CO;2-Q · Zbl 0858.76042
[1047] Lowrey R.D., FEN (3) pp 18– (1993)
[1048] Lowrey R.D., FEN (4) pp 16– (1993)
[1049] Lowther D.A., Prob. Appl. pp 216– (1993)
[1050] DOI: 10.1016/S0010-4485(00)00037-3 · Zbl 05860756
[1051] DOI: 10.1016/0956-0521(93)90041-T
[1052] DOI: 10.1002/1098-2760(20001005)27:1<17::AID-MOP6>3.0.CO;2-U
[1053] Maza S., Int. Conf. ASME 97
[1054] Miller G., Sparse Matrix Comput.
[1055] DOI: 10.1016/0010-4485(95)00082-8 · Zbl 05475720
[1056] Mitchell S., Nat. Lab., Albuquerque, NM pp 33– (1997)
[1057] Mitchell S., Sandia Nat. Lab. pp 231– (1995)
[1058] Mitchell, S.A. (1993), “Mesh generation with provable quality bounds”, PhD thesis,Cornell Univ., Ithaca, NY
[1059] DOI: 10.2493/jjspe.62.1282
[1060] Miura K.T., Int. J. Jpn. Soc. Precis. Eng. 30 (4) pp 353– (1996)
[1061] DOI: 10.1016/S0045-7949(95)00176-X · Zbl 0933.74539
[1062] DOI: 10.1109/8.719987
[1063] DOI: 10.1002/nme.1620380305 · Zbl 0821.65074
[1064] DOI: 10.1016/0168-874X(93)90046-S · Zbl 0800.73438
[1065] DOI: 10.1007/s003660050012 · Zbl 05468408
[1066] Plaza A., IFIP Trans. A Comp. Sci. Technol. 12 pp 409– (1992)
[1067] DOI: 10.1016/0965-9978(96)00005-1 · Zbl 05470384
[1068] Plaza A., 4th World Cong. Comput. Mech., Buenos Aires pp 888–
[1069] Qiang W.Z., J. Comp.-Aided Des. Comp. Graph. 10 (2) pp 118– (1998)
[1070] Qin H., 8th Pacific Conf. Comp. Graph. Appl. pp 184–
[1071] DOI: 10.1109/2945.722296 · Zbl 05108376
[1072] DOI: 10.1002/nme.1620381303 · Zbl 0833.73062
[1073] Quiroz L.L., 4th World Cong. Comput. Mech., Buenos Aires pp 876–
[1074] Rivara M.C., 5th US Nat. Cong. Comput. Mech. pp 105– (1999)
[1075] DOI: 10.1016/0045-7949(95)00041-E
[1076] DOI: 10.1016/0045-7949(95)00117-Y · Zbl 0900.73801
[1077] Saxena M., SIAM Reg. Conf. Geom. Asp. Indust. Design, WPAFB pp 39– (1992)
[1078] DOI: 10.1016/1049-9652(92)90062-3
[1079] Seshadri R., “In search of redistribution nodes 73 (1997)
[1080] Shimada K., J. Jpn. Soc. Simul. Tech. 12 (1) pp 11– (1993)
[1081] Sheffer A., 6th Int. Meshing Roundtable pp 49–
[1082] Shepherd J., 5th US Nat. Cong. Comput. Mech. pp 89–
[1083] DOI: 10.1002/1097-0207(20000910/20)49:1/2<277::AID-NME933>3.0.CO;2-V · Zbl 0989.74073
[1084] Shostko A.A., 4th World Cong. Comput. Mech., Buenos Aires pp 991–
[1085] DOI: 10.1016/S0045-7949(00)00080-8
[1086] DOI: 10.1002/(SICI)1097-0207(19991220)46:11<1933::AID-NME800>3.0.CO;2-7 · Zbl 0965.76047
[1087] Sonzogni V.E., 4th World Cong. Comput. Mech., Buenos Aires pp 86–
[1088] DOI: 10.1016/0045-7949(93)90093-S · Zbl 0773.73092
[1089] DOI: 10.1002/nme.1620361910 · Zbl 0854.73071
[1090] DOI: 10.1007/s003660050016 · Zbl 0943.65141
[1091] Suprobo, P. (1991), “A regional mapping procedure for finite element mesh design”, PhD thesis,Purdue Univ., West Lafayette, IN.
[1092] Suprobo P., 10th Conf. Electr. Comput., ASCE pp 287– (1991)
[1093] Szczygiel I., Adv. Eng. Software 13 (2) pp 73– (1991)
[1094] DOI: 10.1002/(SICI)1099-0887(199604)12:4<243::AID-CNM975>3.0.CO;2-R · Zbl 0853.65128
[1095] DOI: 10.1002/nme.1620361506 · Zbl 0800.73462
[1096] Tautges T.J., Sandia Nat. Lab. pp 115– (1995)
[1097] DOI: 10.1137/S0036142996313932 · Zbl 0913.65059
[1098] DOI: 10.1109/34.857007 · Zbl 05111265
[1099] Valliappan S., Comp. Mech.: Conc. Comp., Balkema pp 243– (1993)
[1100] Vavasis S.A., 5th US Nat. Cong. Comput. Mech. pp 111–
[1101] DOI: 10.1007/BF00376134 · Zbl 0894.73182
[1102] DOI: 10.1090/S0025-5718-1995-1308463-0
[1103] DOI: 10.1016/S0898-1221(97)00079-5 · Zbl 0912.65080
[1104] Yang, H. (1991), “Automatic finite element mesh generation over domains comprised of multiply connected, intersecting, rigid body movable subdomains”, PhD thesis,Columbia Univ., New York, NY.
[1105] Yeker C., 1992 ASME Int. Comput. Eng. Expo. pp 165– (1992)
[1106] DOI: 10.1002/nme.1620381506 · Zbl 0843.73077
[1107] DOI: 10.1299/kikaia.59.2893
[1108] DOI: 10.1002/nme.1620320304
[1109] Zimmerman D.C., 15th Int. Modal Anal. Conf., IMAC pp 551–
[1110] DOI: 10.1006/mssp.1998.1205
[1111] Zorin, D. et al. (1996), “Interpolating subdivision for meshes with arbitrary topology”, 1996SIGGRAPH,ACM, New Orleans,LA, pp.189-192.
[1112] Zuo X., J. Shanghai Jiaotong Univ. 31 (9) pp 80– (1997)
[1113] Ait-Sadi R., 2nd Int. Conf. Comp. Electromag., IEE No 384 pp 215–
[1114] Almeida C.A., ASME Int. Comp. Eng. Conf. Exhib., ASME pp 561–
[1115] Barbosa E., NUMETA 90 pp 1058– (1990)
[1116] Beckers P., 2nd Int. Conf. Comp. Struct. Tech. pp 47– (1994)
[1117] DOI: 10.1016/0168-874X(94)90081-7 · Zbl 0854.73064
[1118] DOI: 10.1002/cnm.1640101008 · Zbl 0812.65105
[1119] Coorevits P., Europ. J. Finite Elem. 3 (3) pp 379– (1994)
[1120] DOI: 10.1016/0263-8231(94)00004-J
[1121] DOI: 10.1109/20.250774
[1122] Gelten C., 3rd World Cong. Comput. Mech. pp G5– (1994)
[1123] DOI: 10.1061/(ASCE)0887-3801(1990)4:3(199)
[1124] DOI: 10.1002/nme.1620320412 · Zbl 0778.65076
[1125] DOI: 10.1002/jnm.1660040204
[1126] DOI: 10.1016/0924-0136(90)90177-V
[1127] Jesenik M., Num. Models Ind. Appl. pp 181–
[1128] DOI: 10.1002/nme.1620290709
[1129] DOI: 10.1016/S0168-874X(96)00039-X · Zbl 0897.65074
[1130] Klein R., Proc. Visualization ’96 pp 311–
[1131] DOI: 10.1016/0045-7949(93)90463-N
[1132] DOI: 10.1016/S0045-7949(98)00215-6
[1133] DOI: 10.1002/nme.1620351004 · Zbl 0775.73273
[1134] DOI: 10.1137/S1064827594271068 · Zbl 0913.65106
[1135] DOI: 10.1016/0045-7949(94)90432-4 · Zbl 0800.73427
[1136] DOI: 10.1002/nme.1620371609 · Zbl 0813.73068
[1137] Rust W., New Adv. Comp. Str. Mech. pp 219– (1992)
[1138] DOI: 10.1002/cnm.1640090808 · Zbl 0779.73068
[1139] DOI: 10.1016/0013-7944(94)E0057-N
[1140] DOI: 10.1002/cnm.1640091006 · Zbl 0803.73067
[1141] DOI: 10.1016/0377-0427(91)90229-D · Zbl 0727.73077
[1142] DOI: 10.1016/S0168-874X(96)00056-X · Zbl 0916.73064
[1143] DOI: 10.1002/(SICI)1099-0887(199809)14:9<797::AID-CNM188>3.0.CO;2-I · Zbl 0916.65111
[1144] Tezuka A., 3rd World Cong. Comput. Mech. pp G1–
[1145] DOI: 10.1299/kikaia.60.1863
[1146] Tezuka A., Ser A 39 (2) pp 204– (1996)
[1147] DOI: 10.1016/S0965-9978(98)00069-6 · Zbl 05467422
[1148] Weatherill N.P., NUMETA 90 pp 1167– (1990)
[1149] DOI: 10.1007/BF00370012 · Zbl 0825.73679
[1150] Armstrong C.G., 4th Int. Conf. Qual. Assur. Standards FE, Brighton.
[1151] DOI: 10.1007/978-1-4612-1556-1_2
[1152] DOI: 10.1007/BF01215977 · Zbl 05469976
[1153] DOI: 10.1016/0168-874X(94)90081-7 · Zbl 0854.73064
[1154] Choi C.K., Comp. Mech.: Conc. Comp., Balkema pp 1233– (1993)
[1155] Choi C.K., 3rd World Cong. Comput. Mech. pp D12– (1994)
[1156] DOI: 10.1002/(SICI)1097-0207(19960515)39:9<1585::AID-NME918>3.0.CO;2-D · Zbl 0865.73058
[1157] Coupez T., Num. Grid Gener. Comp. Field Simul., Mississippi. (1996)
[1158] Coupez T., Nat. Cong. Comput. Mech., Boulder, CO pp 103– (1999)
[1159] DOI: 10.1016/S0010-4485(97)00085-7 · Zbl 05470932
[1160] Damilano J.G., Str. Dyn. Mater. Conf. pp 1571–
[1161] DOI: 10.1016/0045-7949(91)90091-Y · Zbl 0825.73695
[1162] George P.L., Tech. Devel., Civil-Comp, Edinburgh pp 1– (2000)
[1163] DOI: 10.1016/S0168-874X(96)00054-6 · Zbl 0916.73051
[1164] DOI: 10.1109/20.124030
[1165] DOI: 10.1109/20.250775
[1166] DOI: 10.1109/22.265536
[1167] DOI: 10.1016/0168-9274(94)90031-0 · Zbl 0803.92014
[1168] Khan A.I., 5th Int. Conf. Civil Struct. Eng. Comp., CCP pp 63–
[1169] DOI: 10.1016/S0045-7825(99)00375-8 · Zbl 1003.76055
[1170] DOI: 10.1002/zamm.19980781552 · Zbl 0925.73859
[1171] DOI: 10.2514/3.10416 · Zbl 0696.76077
[1172] Kocvara M., 6th Int. Conf. Math. Meth. Eng. pp 231–
[1173] DOI: 10.1109/20.124039
[1174] DOI: 10.1002/cnm.1640100503 · Zbl 0811.65108
[1175] DOI: 10.1016/S0168-874X(96)00031-5 · Zbl 0918.73255
[1176] DOI: 10.1002/(SICI)1097-0207(19970630)40:12<2195::AID-NME153>3.0.CO;2-3 · Zbl 0890.73068
[1177] DOI: 10.1016/S0045-7825(98)00188-1 · Zbl 0963.74063
[1178] Lo S.H., Civil-Comp pp 109– (1998)
[1179] DOI: 10.1002/fld.1650141204 · Zbl 0753.76099
[1180] McDill J.M., Trans. Canad. Soc. Mech. Eng. 15 (1) pp 57– (1991)
[1181] DOI: 10.1016/S0045-7825(99)00369-2 · Zbl 0977.76073
[1182] Medill J.M., Trans. Canad. Soc. Mech. Eng. 15 (1) pp 57– (1991)
[1183] DOI: 10.1002/(SICI)1099-0887(199805)14:5<397::AID-CNM119>3.0.CO;2-D · Zbl 0907.73063
[1184] DOI: 10.1109/20.124043
[1185] DOI: 10.1049/cp:19940041
[1186] DOI: 10.1109/20.250682
[1187] Muthukrishnan, S.N. (1993), “Mesh generation and adaptive refinement of tetrahedral elements for three-dimensional finite element method applications”, PhD thesis,The Univ. of Texas, Arlington, TX.
[1188] Muthukrishnan S.N., 19th Ann. ASME Design Autom. Conf. pp 699–
[1189] DOI: 10.2514/3.12386 · Zbl 0850.73272
[1190] DOI: 10.1109/20.250778
[1191] DOI: 10.1016/S0045-7825(00)00294-2 · Zbl 1008.76041
[1192] DOI: 10.1002/nme.1620380809 · Zbl 0825.73782
[1193] DOI: 10.1016/S0045-7825(96)01116-4 · Zbl 0883.65094
[1194] DOI: 10.1016/0377-0427(91)90227-B · Zbl 0733.65075
[1195] DOI: 10.1002/cnm.1630080502 · Zbl 0755.65115
[1196] DOI: 10.1016/0020-7101(95)01146-3
[1197] DOI: 10.1016/0045-7949(94)00320-3 · Zbl 0877.73069
[1198] Shephard M.S., Model. Mesh Gener. Adapt. Num. Meth. PDE pp 67–
[1199] DOI: 10.1016/S0168-874X(96)00027-3 · Zbl 0916.73063
[1200] DOI: 10.1016/S0965-9978(98)00069-6 · Zbl 05467422
[1201] Wilson, J.K. (1996), “Procedures for sequential and parallel automatic adaptive tetrahedral mesh generation”, PhD thesis,Heriot-Watt Univ., Edinburgh.
[1202] Wilson J.K., Devel. Comp. Tech. Str. Eng., Civil-Comp, Edinburgh pp 403– (1995)
[1203] Wilson J.K., Adv. Comp. Str. Tech., Civil-Comp, Edinburgh pp 327– (1996)
[1204] DOI: 10.1108/02644409810225779 · Zbl 0934.65132
[1205] DOI: 10.1016/S0045-7949(98)00042-X · Zbl 0940.74070
[1206] Bank R., 5th US Nat. Cong. Comput. Mech. pp 363– (1999)
[1207] Barnard S.T., 7th SIAM Conf. Parallel Proc. Sci. Comp. 18 pp 627– (1995)
[1208] DOI: 10.1016/S0965-9978(98)00040-4 · Zbl 05469525
[1209] DOI: 10.4203/ccp.45.3.3
[1210] Bern M., WADS’93 pp 188–
[1211] DOI: 10.1142/S0218195999000303 · Zbl 1074.68630
[1212] Bhavsar S., 5th US Nat. Cong. Comput. Mech. pp 198–
[1213] Biswas R., 5th US Nat. Cong. Comput. Mech. pp 200–
[1214] DOI: 10.1016/S0307-904X(00)00040-8 · Zbl 1076.65535
[1215] DOI: 10.1002/cnm.1630080405 · Zbl 0755.65112
[1216] Burghardt M., Civil-Comp pp 11– (1998)
[1217] DOI: 10.4203/ccp.45.2.4
[1218] DOI: 10.1016/0965-9978(96)00021-X · Zbl 05470398
[1219] Carter W.T., NATUG-5 pp 28– (1992)
[1220] Castanos J.G., 8th SIAM Conf. Parallel Proc. Sci. Comp., CD-ROM pp 1– (1997)
[1221] DOI: 10.4203/ccp.45.2.1
[1222] DOI: 10.4203/csets.1.9
[1223] DOI: 10.1080/02533839.1996.9677797
[1224] Chew L.P., Trends Unstruct. Mesh Gener. pp 89–
[1225] Chrisochoides N., 5th US Nat. Cong. Comput. Mech. pp 99– (1999)
[1226] Chung Y.C., Int. Comp. Symp. pp 967–
[1227] Chung Y.C., ICPADS pp 210– (1994)
[1228] DOI: 10.1002/cpe.4330070704 · Zbl 05478779
[1229] Coupez T., Num. Grid Gener. Comp. Field Simul., Mississippi. (1996)
[1230] DOI: 10.1016/S0307-904X(00)00045-7 · Zbl 1076.74551
[1231] De Cougny, H.L. (1998), “Parallel unstructured distributed three-dimensional mesh generation”, PhD thesis, Rensselaer Polytech. Inst., Troy,NY.
[1232] De Cougny H.L., 3rd World Cong. Comput. Mech. pp G3– (1994)
[1233] DOI: 10.1016/S0045-7825(98)00300-4 · Zbl 0963.76073
[1234] DOI: 10.1002/(SICI)1097-0207(19991110)46:7<1101::AID-NME741>3.0.CO;2-E · Zbl 0964.76073
[1235] DOI: 10.1016/0956-0521(94)90014-0
[1236] DOI: 10.1007/BF01299395 · Zbl 05476242
[1237] DOI: 10.1016/0168-9274(95)00103-4 · Zbl 0860.65095
[1238] Diekmann R., IRREGULAR ’95 pp 199–
[1239] DOI: 10.1002/(SICI)1096-9128(199801)10:1<53::AID-CPE288>3.0.CO;2-W
[1240] DOI: 10.1016/S0167-8191(00)00043-0 · Zbl 0948.68076
[1241] Diniz, P. et al. (1995), “Parallel algorithms for dynamically partitioning unstructured grids”, in Bailey, D.H. et al. (Eds),SIAM Proc. Ser. 195, SIAM, Philadelphia, PA, pp.615-620. · Zbl 0836.65122
[1242] Doltsinis I.S., 1st Int. Conf. Comp. Struct. Technol. 2 pp 1– (1991)
[1243] DOI: 10.1016/0956-0521(91)90047-9
[1244] DOI: 10.1002/nme.1620360503 · Zbl 0825.73997
[1245] DOI: 10.1016/0168-9274(93)90104-Y · Zbl 0782.65138
[1246] DOI: 10.1002/nme.1620380608 · Zbl 0825.73780
[1247] Flaherty J.E., 4th World Cong. Comput. Mech., Buenos Aires pp 882–
[1248] Flaherty J.E., Grid Gener. Adapt. Algor., IMA Math. Appl. pp 113–
[1249] Freitag L.A., Nat. Lab., Albuquerque, NM pp 47– (1995)
[1250] Freitag L., 8th SIAM Conf. Parallel Proc. Sci. Comp., CD-ROM pp 1–
[1251] DOI: 10.1137/S1064827597323208 · Zbl 0939.65132
[1252] Gabbert U., Appl. High-Perf. Comp. Eng. IV, CMP, Southampton pp 123– (1995)
[1253] Gaither A., 5th Int. Conf. Num. Grid Gener. pp 731–
[1254] Galtier J., 5th Meshing Roundtable pp 107– (1996)
[1255] DOI: 10.1007/10704054_12
[1256] DOI: 10.1016/0956-0521(94)90015-9
[1257] DOI: 10.1137/S1064827594275339 · Zbl 0913.65107
[1258] DOI: 10.1016/0167-8191(95)00054-2
[1259] Hammond, S.W. (1991), “Mapping unstructured grid computations to massively parallel computers”, PhD thesis, Rensselaer Polytech. Inst, Troy,NY.
[1260] DOI: 10.4203/ccp.20.4.3
[1261] Hodgson D.C., 6th SIAM Conf. Parallel Proc. Sci. Comp., Norfolk. (1993)
[1262] DOI: 10.4203/ccp.20.4.5
[1263] DOI: 10.1016/0956-0521(94)00022-E
[1264] DOI: 10.1016/0965-9978(96)00008-7 · Zbl 05470385
[1265] Hodgson D.C., Parallel Comp. Fluid Mech.
[1266] Hsieh S.H., ICPADS pp 168– (1994)
[1267] DOI: 10.1016/0045-7825(94)00076-X · Zbl 0847.76035
[1268] DOI: 10.1016/0956-0521(94)90013-2
[1269] DOI: 10.1016/S0168-874X(96)00039-X · Zbl 0897.65074
[1270] DOI: 10.1137/S106482759528065X · Zbl 0871.65100
[1271] Kaveh A., Civil-Comp pp 259– (1996)
[1272] DOI: 10.1016/S0045-7949(98)00170-9 · Zbl 0969.74594
[1273] DOI: 10.1016/S0965-9978(98)00100-8 · Zbl 05469583
[1274] Kawamura Y., 3rd World Cong. Comput. Mech. pp G2–
[1275] DOI: 10.1016/0956-0521(91)90041-3
[1276] DOI: 10.1016/0956-0521(93)90015-O
[1277] Kobayashi M., Ser II 35 (3) pp 337– (1992)
[1278] DOI: 10.4203/ccp.45.4.3
[1279] Lammer L., Civil-Comp pp 11– (1998)
[1280] DOI: 10.1016/S0965-9978(00)00068-5 · Zbl 1003.68519
[1281] Lammer L., 5th Int. Conf. Comput. Plast., CIMNE pp 1798– (1997)
[1282] DOI: 10.1145/1122018.1122056
[1283] DOI: 10.1007/BFb0018535
[1284] DOI: 10.1016/S0045-7825(98)00005-X · Zbl 0960.76075
[1285] DOI: 10.1016/0045-7825(92)90192-M · Zbl 0825.76680
[1286] Lohner R., 28th AIAA Fluid Dyn. Conf.
[1287] DOI: 10.1016/S0168-9274(99)00002-1 · Zbl 0951.76040
[1288] Mestres J.C., Adv. Comp. Meth. Str. Mech., CIMNE pp 328– (1996)
[1289] Miura K.T., Int. J. Jpn. Soc. Precis. Eng. 30 (4) pp 353– (1996)
[1290] Moore D., Math. Finite Elem. Appl. VII pp 93–
[1291] Neugebauer F., Proc., Civil-Comp pp 25– (1997)
[1292] DOI: 10.1137/S0036142994278887 · Zbl 0890.65124
[1293] Okusanya T., 5th Int. Conf. Num. Grid Gener. Comp pp 719– (1996)
[1294] DOI: 10.1145/258492.258496
[1295] DOI: 10.1016/0045-7825(94)00080-8 · Zbl 0851.73068
[1296] DOI: 10.1002/(SICI)1097-0207(19990220)44:5<593::AID-NME516>3.0.CO;2-0 · Zbl 0938.65143
[1297] DOI: 10.1016/S0045-7825(98)00374-0 · Zbl 0997.65137
[1298] Saxena, M. (1990), “Parallel algorithms for 3-D automatic meshing and hierarchical substructuring”, PhD thesis,The Univ. of Rochester, Rochester, NY.
[1299] DOI: 10.1016/0045-7949(90)90285-A
[1300] DOI: 10.1016/0045-7949(92)90042-X · Zbl 0774.65079
[1301] DOI: 10.1016/0045-7949(93)90286-M · Zbl 0800.73408
[1302] Seale C., Dev. Comp. Tech. Str. Eng., Civil Comp pp 459– (1995)
[1303] Shephard M.S., 4th World Cong. Comput. Mech., Buenos Aires pp 890–
[1304] Shephard M.S., Neuilly-Sur-Seine pp 6.1–
[1305] DOI: 10.1016/S0167-8191(97)00056-2 · Zbl 0894.68020
[1306] Shephard M.S., Solving Large Scale Prob. Mech. pp 459–
[1307] DOI: 10.1002/nme.1620380603 · Zbl 0822.65097
[1308] Stals L., ICAPP 95 pp 792–
[1309] Sziveri J., Adv. Comp. Str. Tech., Civil-Comp, Edinburgh pp 313– (1996)
[1310] DOI: 10.1016/S0965-9978(98)00103-3 · Zbl 05469579
[1311] DOI: 10.1002/(SICI)1097-0207(20000410)47:10<1773::AID-NME857>3.0.CO;2-R · Zbl 0990.74075
[1312] Sziveri J.J., Dev. Comp. Tech. Str. Eng., Civil Comp pp 449– (1995)
[1313] Taghavi R., Proc. CUG Conf.
[1314] DOI: 10.1007/BF01198733 · Zbl 05474591
[1315] DOI: 10.1049/ip-cdt:19981936
[1316] Teresco J.D., Nat. Cong. Comput. Mech., Boulder, CO pp 199– (1999)
[1317] DOI: 10.1016/S0965-9978(00)00051-X · Zbl 02180771
[1318] DOI: 10.1016/S0045-7949(98)00254-5
[1319] DOI: 10.1016/S0045-7949(96)00082-X · Zbl 0899.73521
[1320] DOI: 10.1016/S0965-9978(97)00062-8 · Zbl 05467427
[1321] Touheed D., Proc., Civil-Comp pp 105– (1997)
[1322] DOI: 10.1002/nme.1620380306 · Zbl 0821.65075
[1323] DOI: 10.1016/0045-7825(96)01024-9 · Zbl 0881.65118
[1324] Verhoeven N.A., Parallel Comp. Fluid Mech. pp 641–
[1325] DOI: 10.2514/3.12013 · Zbl 0800.76368
[1326] DOI: 10.4203/ccp.45.4.1
[1327] Weatherill N.P., 6th Int. Conf. Num. Grid Gener. Field Simul., Greenwich.
[1328] Williams R., Num. Grid Gener. Comput. Fluid Dyn. (1991)
[1329] Wilson, J.K. (1996), “Procedures for sequential and parallel automatic adaptive tetrahedral mesh generation”, PhD thesis,Heriot-Watt Univ., Edinburgh.
[1330] Wilson J.K., Dev. Comp. Tech. Str. Eng., Civil-Comp, Edinburgh pp 403– (1995)
[1331] Wilson J.K., Adv. Comp. Str. Tech., Civil-Comp, Edinburgh pp 327– (1996)
[1332] DOI: 10.1016/S0045-7949(98)00042-X · Zbl 0940.74070
[1333] DOI: 10.1007/BF01198731 · Zbl 05474589
[1334] DOI: 10.1016/S0898-1221(97)00079-5 · Zbl 0912.65080
[1335] Yoon S., Int. Conf. Simul. Semicond. Precess. Devices pp 135–
[1336] Yoshimura S., 4th World Cong. Comput. Mech., Buenos Aires pp 940–
[1337] DOI: 10.1016/S0045-7949(00)00053-5
[1338] Askes H., 5th US Nat. Cong. Comput. Mech. pp 324– (1999)
[1339] DOI: 10.1002/cnm.1630070410 · Zbl 0723.73084
[1340] Bicanic N., Int. Conf. Dam Fract.
[1341] DOI: 10.1016/S0045-7825(99)00324-2 · Zbl 0993.74060
[1342] Cao J., 7th Int. Offshore Polar Eng. Conf. 4 pp 98–
[1343] DOI: 10.1111/j.1460-2695.1996.tb00987.x
[1344] DOI: 10.1002/cnm.1640100507 · Zbl 0804.73056
[1345] DOI: 10.1002/(SICI)1097-0207(19980630)42:4<749::AID-NME378>3.0.CO;2-F · Zbl 0912.73054
[1346] Gerstle W.H., Fract. Mech. 21st Symp., ASTM, STP 1074 pp 509– (1990)
[1347] Kaltsouni, M. (1990), “Adaptive mesh refinement for meshes with singular elements”, PhD thesis, Illinois Inst. of Tech., Chicago,IL.
[1348] DOI: 10.1108/02644409810200695 · Zbl 0918.73252
[1349] Kovse I., 4th Int. Conf. Comp.-Aided Assess. Contr., CMP pp 935–
[1350] DOI: 10.1016/0045-7949(90)90253-X · Zbl 0709.73085
[1351] DOI: 10.1002/(SICI)1099-0887(199805)14:5<409::AID-CNM152>3.0.CO;2-U · Zbl 0923.73059
[1352] DOI: 10.1016/0013-7944(92)90082-P
[1353] DOI: 10.1299/kikaia.59.1811
[1354] DOI: 10.1016/0013-7944(94)E0056-M
[1355] Neto J.B.C., 5th US Nat. Cong. Comput. Mech. pp 102–
[1356] DOI: 10.1002/cnm.1640111207 · Zbl 0838.73073
[1357] Pastor M., 4th Int. Conf. Comp. Plast., Pineridge Press pp 683–
[1358] Pilat K.R., 1994 Press. Vess. Piping Conf., PVP 272 pp 189– (1994)
[1359] DOI: 10.1002/nme.1620381603 · Zbl 0839.73072
[1360] DOI: 10.1016/S0045-7825(97)00068-6 · Zbl 0939.74071
[1361] DOI: 10.4203/ccp.54.4.1
[1362] Skallerud B., ASTM Spec. Publ. 29 (1997)
[1363] DOI: 10.1002/cnm.1640110205 · Zbl 0816.73062
[1364] DOI: 10.1016/0927-0256(93)90023-G
[1365] DOI: 10.1002/(SICI)1099-0887(199809)14:9<797::AID-CNM188>3.0.CO;2-I · Zbl 0916.65111
[1366] DOI: 10.1016/S0045-7825(97)00287-9 · Zbl 0938.74071
[1367] DOI: 10.1016/0013-7944(90)90292-O
[1368] Aminpour M.A., Str. Dyn. Mater. Conf. Exhib. 4 pp 3014–
[1369] Bedewi N.E., 1994 Int. Mech. Eng. Cong. Expo., DSC 54 pp 353–
[1370] DOI: 10.1002/(SICI)1097-0207(20000620)48:5<655::AID-NME893>3.0.CO;2-D · Zbl 0955.74059
[1371] Haslinger J., Appl. Math. 37 (2) pp 105– (1992)
[1372] DOI: 10.1002/(SICI)1097-0207(19990130)44:3<313::AID-NME502>3.0.CO;2-V · Zbl 0941.74063
[1373] Littlefield D.L., 5th US Nat. Cong. Comput. Mech. pp 287– (1999)
[1374] DOI: 10.1016/S0045-7825(99)00068-7 · Zbl 0980.70003
[1375] Potts D.M., Comp. Meth. Adv. Geomech. pp 101– (1991)
[1376] DOI: 10.1016/0029-5493(92)90278-4
[1377] DOI: 10.1016/S0734-743X(00)00012-9
[1378] DOI: 10.1109/20.497499
[1379] DOI: 10.1109/20.124048
[1380] Chellamuthu K.C., Appl. Comput. Electromag. Soc. J. 12 (1) pp 61– (1997)
[1381] Chen Z., Ann. Rev. Prog. Appl. Comp. Electromag., Monterey, CA pp 932– (1996)
[1382] DOI: 10.1063/1.345968
[1383] Cingoski V., 5th US Nat. Cong. Comput. Mech. pp 100–
[1384] Di Napoli A., Model. Simul. Control A 35 (3) pp 27– (1991)
[1385] DOI: 10.1108/eb051907 · Zbl 0850.65229
[1386] Golden D., Appl. Parallel Comput., 4th Int. Worksh. pp 172–
[1387] DOI: 10.1108/eb051799
[1388] Hamandi L., Ann. Rev. Prog. Appl. Comp. Electromag., Monterey, CA pp 864– (1995)
[1389] DOI: 10.1109/20.728305
[1390] DOI: 10.1002/mop.4650071511
[1391] DOI: 10.1109/20.376376
[1392] Jin J.M., Antennas Propag. Soc. Symp. 1991 Digest pp 1216–
[1393] Jin J.M., Antennas Prop. 139 (5) pp 472– (1992)
[1394] DOI: 10.1109/20.822537
[1395] DOI: 10.1109/20.124038
[1396] DOI: 10.1108/eb051845
[1397] DOI: 10.1109/74.544405
[1398] DOI: 10.1002/eej.4391090513
[1399] DOI: 10.1109/20.105026
[1400] Peraire J., AIAA Paper pp 96– (1996)
[1401] DOI: 10.1109/20.312701
[1402] DOI: 10.1109/74.250160
[1403] Roy T., 24th Europ. Microwave Conf. pp 579–
[1404] DOI: 10.1002/mop.4650080605
[1405] DOI: 10.1002/eej.4391110409
[1406] Schmollebeck F., DrTech thesis, Tech. Univ. of Wien, Austria. (1990)
[1407] DOI: 10.1016/S0304-8853(98)00994-9
[1408] DOI: 10.1109/22.754873
[1409] DOI: 10.1109/20.106432
[1410] DOI: 10.1109/20.376307
[1411] Uler F.G., Southcon 92 pp 84– (1992)
[1412] Woo L.W., Ann. Rev. Prog. Appl. Comp. Electromag., Monterey, CA pp 135– (1995)
[1413] DOI: 10.1109/20.497494
[1414] Bedewi N.E., 1994 Int. Mech. Eng. Cong. Expo., DSC 54 pp 353–
[1415] Bibel G.D., Gear Technol. 14 (2) pp 44– (1997)
[1416] DOI: 10.1007/BF01215977 · Zbl 05469976
[1417] Catherall D., CMP pp 77–
[1418] Elkholy A.H., Int. J. Comp. Appl. Technol. 9 (2) pp 159– (1996)
[1419] Gu S., J. Tsinghua Univ. 36 (8) pp 77– (1996)
[1420] DOI: 10.2514/6.1999-916
[1421] DOI: 10.1002/1097-0207(20000910/20)49:1/2<145::AID-NME927>3.0.CO;2-W · Zbl 0980.76073
[1422] Khawaja A., 7th Int. Meshing Roundtable, Sandia Nat. Lab.
[1423] DOI: 10.1016/S0045-7825(99)00068-7 · Zbl 0980.70003
[1424] Liu C., Comp. Assist. Mech. Eng. Sci. 2 (4) pp 289– (1995)
[1425] DOI: 10.1115/1.2829173
[1426] DOI: 10.1002/(SICI)1097-0363(19990915)31:1<159::AID-FLD961>3.0.CO;2-O · Zbl 0985.76076
[1427] DOI: 10.1080/095448299261254
[1428] DOI: 10.2514/2.2417
[1429] DOI: 10.1002/(SICI)1099-0887(200003)16:3<177::AID-CNM319>3.0.CO;2-L · Zbl 0949.65129
[1430] DOI: 10.1007/BF02811378
[1431] Weatherill N.P., Rec. Dev. Appl. Aeronaut. Comp. Fluid Dyn.
[1432] Weatherill N.P., Comp. Mech. 21st Century, Saxe-Coburg, Edinburgh pp 219– (2000)
[1433] DOI: 10.1108/02644400110386984 · Zbl 1020.76043
[1434] DOI: 10.1016/0168-874X(93)90049-V
[1435] Yang H., SAE Trans. 100 pp 1070– (1991)
[1436] Yang H., 17th Design Autom. Conf., DE 32 pp 147– (1991)
[1437] DOI: 10.1016/0148-9062(90)91005-R
[1438] Bicanic N., Comp. Aided Anal. Design Concrete Struct. pp 959– (1990)
[1439] Buratynski E.K., 6th World Cong. FEM, Banff, Alberta, Canada pp 295– (1990)
[1440] Charlier R., Comp. Meth. Adv. Geomech., Balkema, Rotterdam pp 1673– (1994)
[1441] DOI: 10.1016/0045-7949(91)90350-U
[1442] Chu T.C., Int. Cong. Exp. Mech., Las Vegas, NV pp 971– (1992)
[1443] DOI: 10.1002/zamm.200008014124
[1444] DOI: 10.1002/(SICI)1096-9853(199712)21:12<817::AID-NAG902>3.0.CO;2-D
[1445] DOI: 10.1016/0148-9062(93)91219-9
[1446] Hicks M.A., Comp. Meth. Adv. Geomech. pp 587– (1994)
[1447] Hu Y., Comp. Meth. Adv. Geomech., Balkema, Rotterdam pp 441– (1994)
[1448] DOI: 10.1016/0045-7949(94)E0200-L
[1449] Lackner R., 5th Int. Conf. Comput. Struct. Tech., Civil-Comp pp 9– (2000)
[1450] Mestat P., Bull. des Lab. des Ponts et Chaussees (212) pp 39– (1997)
[1451] Pang Z., Chinese J. Rock Mech. Eng. 18 (2) pp 197– (1999)
[1452] DOI: 10.1007/BF00788135
[1453] Pastor M., Num. Models Geomech. pp 339–
[1454] Roels S., Tech. Devel., Civil-Comp, Edinburgh pp 103– (2000)
[1455] DOI: 10.1002/nag.1610171005
[1456] Tanabe M., Comp. Mech. 9 (3) pp 185– (1992)
[1457] DOI: 10.1016/0167-6105(93)90301-4
[1458] Wang B.T., J. Dalian Univ. Tech. 39 (3) pp 445– (1999)
[1459] DOI: 10.1109/20.877744
[1460] DOI: 10.1109/43.681264 · Zbl 05447243
[1461] Basaran C., InterPACK ’99 pp 1147– (1999)
[1462] Bradley K.J., 31st IAS Ann. Meet. pp 625– (1996)
[1463] Brown A.R., Simul. Semicond. Dev. Process. 6 pp 336–
[1464] Desaulnier W.E., InterPACK ’99 pp 2069–
[1465] Furukawa T., 3rd World Cong. Comput. Mech. pp G2–
[1466] DOI: 10.1007/BF01578530
[1467] Gong J., Ann. Rev. Prog. App. Comput. Electromag. 2 pp 750– (1998)
[1468] Johansson T.B., IEE Coll. (016) pp 1– (1995)
[1469] Khursheed A., Optik 107 (3) pp 99– (1998)
[1470] DOI: 10.1117/12.255508
[1471] DOI: 10.1155/1998/15828
[1472] DOI: 10.1109/20.877740
[1473] Lakdawala H., Int. Conf. Model. Simul. Microsyst., Comp. Publ. pp 297–
[1474] DOI: 10.1007/978-3-7091-6619-2_112
[1475] DOI: 10.1109/43.486665 · Zbl 05448824
[1476] DOI: 10.1109/20.104870
[1477] Malassiotis S., IEEE Trans. Circuits Syst. 8 (6) pp 756– (1998)
[1478] DOI: 10.1109/20.334084
[1479] DOI: 10.1109/20.877720
[1480] Mueller J., Proc. SPIE 4175 pp 82– (2000)
[1481] DOI: 10.1115/1.2905384
[1482] Son I., Comput. Electron.: Semicond. Transp. pp 33–
[1483] Son I., IEEE CEFC ’96 pp 252–
[1484] Tan Z., Proc. SPIE 4019 pp 193–
[1485] DOI: 10.1109/2944.826884
[1486] Wang S., 19th ISDEIV, IEEE pp 528–
[1487] Wilson N.M., Int. Conf. Model. Simul. Microsyst., Comp. Publ. pp 305–
[1488] DOI: 10.1115/1.1315596
[1489] DOI: 10.1002/jnm.1660080204
[1490] DOI: 10.1109/20.497497
[1491] Barata Marques M., J. Mater. Process. Technol., Spec No. 24 pp 157– (1990)
[1492] Chang W., Comp. Meth. Appl. Mech. Eng. 112 (1) pp 41– (1994)
[1493] Chen J.H., Trans. Aeron. Astron. Soc. Rep. China 27 (4) pp 329– (1995)
[1494] Coupez T., NUMIFORM 95 pp 407–
[1495] Coupez T., Meth. Ind. Form. Process., Balkema, Rotterdam pp 237– (1992)
[1496] Coupez T., 3rd Int. Conf. Comp. Plast., Pineridge Press pp 1077– (1992)
[1497] DOI: 10.1016/0924-0136(91)90048-J
[1498] Dick R.E., Meth. Ind. Form. Process., Balkema, Rotterdam pp 243– (1992)
[1499] DOI: 10.1007/PL00010767
[1500] Doege E., 5th US Nat. Cong. Comput. Mech. pp 105– (1999)
[1501] DOI: 10.1016/0045-7825(92)90026-G · Zbl 0777.73064
[1502] Dyduch M., NUMIFORM 95 pp 419–
[1503] Fourment L., Rev. Europ. Elements Finis 3 pp 247– (1994)
[1504] DOI: 10.1007/BF01215976 · Zbl 05469975
[1505] Gay C., J. Mater. Process. Technol. 34 (1) pp 149– (1992)
[1506] DOI: 10.1016/0924-0136(94)90418-9
[1507] DOI: 10.1016/0924-0136(92)90091-6
[1508] DOI: 10.1016/0924-0136(94)90415-4
[1509] DOI: 10.1016/S0924-0136(98)00349-5
[1510] DOI: 10.1002/nme.1620300811
[1511] DOI: 10.1016/0924-0136(90)90177-V
[1512] DOI: 10.1002/(SICI)1097-0207(19990130)44:3<313::AID-NME502>3.0.CO;2-V · Zbl 0941.74063
[1513] DOI: 10.1002/(SICI)1097-0207(19990620)45:5<553::AID-NME531>3.0.CO;2-A · Zbl 0946.74061
[1514] DOI: 10.1007/s003660050030 · Zbl 05466879
[1515] He Y., J. Mater. Process. Technol. 94 (2) pp 231– (1999)
[1516] DOI: 10.1016/S0924-0136(01)00497-6
[1517] Jiang T., J. Comp.-Aided Des. Comp. Graph. 11 (2) pp 104– (1999)
[1518] DOI: 10.1108/02644400010360884 · Zbl 1009.74071
[1519] DOI: 10.1002/(SICI)1097-0207(19971115)40:21<4059::AID-NME249>3.0.CO;2-E · Zbl 0898.73063
[1520] Joun M.S., 4th Int. Conf. Comp. Plast. pp 419–
[1521] Kavakli S., 4th Int. Conf. Comp. Plast., Pineridge Press pp 431– (1995)
[1522] DOI: 10.1002/(SICI)1097-0207(19990710)45:7<801::AID-NME604>3.0.CO;2-# · Zbl 0941.74065
[1523] DOI: 10.1016/0020-7403(92)90034-E · Zbl 0825.73764
[1524] DOI: 10.1002/1099-0887(200009)16:9<625::AID-CNM359>3.0.CO;2-Q · Zbl 0986.74069
[1525] Lee Y.K., Comp. Eng., PCC ’93 pp 441–
[1526] Lin G., ASME pp 37– (1992)
[1527] Lin, G.J. (1994), “Adaptive remeshing methods for finite element simulation of composite material processing”, PhD thesis,The Univ. of Michigan, Ann Arbor, MI.
[1528] DOI: 10.1016/S0924-0136(98)00056-9
[1529] McDill J.M.J., NUMIFORM 95 pp 463–
[1530] Madureira M.L., 4th Int. Conf. Comp. Plast. pp 407–
[1531] Martin J.A., ASME/JSME Joint Press. Vess. Piping Conf., PVP 373 pp 177–
[1532] Matthieu P., NUMETA 90 pp 1113–
[1533] Olmi F., 5th Int. Conf. Comput. Plast., CIMNE pp 619–
[1534] DOI: 10.1016/0924-0136(91)90045-G
[1535] DOI: 10.1016/S0924-0136(97)00293-8
[1536] DOI: 10.1016/S0045-7949(98)00005-4 · Zbl 0935.74071
[1537] DOI: 10.1002/(SICI)1097-0207(19970430)40:8<1449::AID-NME121>3.0.CO;2-Z
[1538] Petersen S.B., 4th World Cong. Comput. Mech., Buenos Aires pp 1115–
[1539] DOI: 10.1108/02644409810225742 · Zbl 0918.73254
[1540] DOI: 10.1016/S0168-874X(99)00063-3 · Zbl 0979.74071
[1541] DOI: 10.1016/S1359-835X(99)00052-4
[1542] Rammelkamp J., Meth. Ind. Form. Process., Balkema, Rotterdam pp 301– (1992)
[1543] Santos A., Cong. Jpn. Soc. Tech. Plast., Kyoto 2 pp 759– (1992)
[1544] DOI: 10.1007/BF01201902
[1545] DOI: 10.1007/BF01200367 · Zbl 0755.65127
[1546] Schneiders R., Int. Conf. Num. Grid Gener. CFD Relat. Field pp 223–
[1547] Selker M.L., 52nd Ann. Tech. Conf. ANTEC 94 pp 3074– (1994)
[1548] Serrar M., ASME pp 75– (1995)
[1549] Shimada K., Numisheet ’96 pp 300–
[1550] DOI: 10.1504/IJVD.1999.005580
[1551] DOI: 10.1016/0927-0256(94)90138-4
[1552] Thomas R., Meth. Ind. Form. Process., Balkema, Rotterdam pp 307– (1992)
[1553] Wei C.S., Aut. Appl., Michigan pp 323– (1991)
[1554] Wei Y.P., 1st Int. Conf. Eng. Comput. Comp. Simul. pp 402–
[1555] Wendt J., Proc. VII, MMMS pp 459– (1995)
[1556] DOI: 10.1108/02644409710180491 · Zbl 0983.74567
[1557] Wu, W.T. (1990), “AMG: automated mesh generation for forming simulation”, PhD thesis,The Ohio State Univ., Columbus, OH
[1558] Wu W.T., 1990 ASME Int. Comp. Eng. Conf. Expo. pp 507–
[1559] Wu W.T., Num. Meth. Ind. Form. Process.
[1560] Yang D.Y., Adv. Technol. Plastics, Kyoto pp 277– (1990)
[1561] DOI: 10.1016/B978-0-444-88864-8.50133-3
[1562] Yukawa N., Adv. Technol. Plast. 4 pp 1719– (1990)
[1563] Yukawa N., J. Jpn. Soc. Technol. Plast. 36 (410) pp 248– (1995)
[1564] DOI: 10.1016/S0924-0136(98)00348-3
[1565] DOI: 10.1007/s004660050458 · Zbl 0977.74579
[1566] DOI: 10.1016/S0045-7949(96)00231-3 · Zbl 0900.73850
[1567] DOI: 10.1016/0169-2607(93)90073-T
[1568] DOI: 10.1016/S1350-4533(97)00039-8
[1569] DOI: 10.1016/S0045-7825(99)00030-4 · Zbl 0981.74081
[1570] DOI: 10.1016/S0021-9290(97)00073-0
[1571] DOI: 10.1016/S0021-9290(00)00055-5
[1572] Ehnes D.L., ASME Int. Mech. Eng. Cong. Expo., BED 36 pp 257–
[1573] DOI: 10.1080/01616412.1996.11740436
[1574] DOI: 10.1016/0010-4825(95)00018-Y
[1575] Grabowski H.A., Medicine Meets Virtual Reality pp 355– (1998)
[1576] Grabowski H.A., CAR ’98, 12th Int. Symp. Exhib. pp 159–
[1577] Guldberg R.E., 1994 Int. Mech. Eng. Cong. Expo., BED 28 pp 147– (1994)
[1578] DOI: 10.1109/BIA.1998.692451
[1579] Hollerbach K., 1995 Bioeng. Conf. 29 pp 49–
[1580] Huang Q., 16th South Biomed. Eng. Conf. pp 370– (1997)
[1581] Inou N., Ser C 42 (2) pp 445– (1999)
[1582] DOI: 10.1016/S1386-5056(97)00038-5
[1583] DOI: 10.1515/bmte.1994.39.5.117
[1584] Lin C.L., Chinese J. Med. Biol. Eng. 18 (2) pp 89– (1998)
[1585] DOI: 10.1016/S0169-2607(99)00004-8
[1586] Moor E.H., 1995 Bioeng. Conf. 29 pp 51–
[1587] Perktold K., 1994 Int. Mech. Eng. Cong. Expo. 28 pp 427–
[1588] DOI: 10.1243/0954411011533562
[1589] DOI: 10.1115/1.1351807
[1590] DOI: 10.1109/NEBC.1999.755729
[1591] Schmidt, J.A. (1993), “Mesh generation with applications in computational electrophysiology”, PhD thesis,Duke Univ., Durham, NC.
[1592] DOI: 10.1016/S0045-7949(00)00080-8
[1593] Srinivasan R., 1995 Bioeng. Conf. 29 pp 47– (1995)
[1594] DOI: 10.1109/22.754873
[1595] DOI: 10.1076/ejom.34.1.0031
[1596] DOI: 10.1016/S1350-4533(97)00049-0
[1597] DOI: 10.1080/030919099294339
[1598] Weinstein D.M., Int. Conf. IEEE Eng. Medic. Biol. Soc. pp 718–
[1599] DOI: 10.1109/86.506406
[1600] Zhang J.Q., 5th US Nat. Cong. Comput. Mech. pp 99– (1999)
[1601] DOI: 10.1109/IEMBS.1992.5761322
[1602] DOI: 10.1109/20.497495
[1603] DOI: 10.1016/S0168-9274(97)00106-2 · Zbl 0933.65136
[1604] Aubry D., IUTAM Symp., Bochum. (1997)
[1605] DOI: 10.1080/10407799308955884
[1606] DOI: 10.1007/BF00363993 · Zbl 0775.73237
[1607] Chang M.C., 1993 Int. Symp. VLSI Tech. pp 142– (1993)
[1608] DOI: 10.2514/3.305
[1609] DOI: 10.1093/imanum/11.1.55 · Zbl 0713.65084
[1610] Eun K., Num. Meth. Therm. Probl. VIII pp 1357–
[1611] Fleischmann P., Int. Conf. Simul. Semicond. Precess. Devices pp 71–
[1612] Franca G.A.C, Pineridge Press pp 927–
[1613] DOI: 10.1080/10407789808913958
[1614] DOI: 10.1016/S0045-7825(97)00025-X · Zbl 0896.73064
[1615] McDill J.M.J., NUMIFORM 95 pp 463–
[1616] DOI: 10.1002/(SICI)1097-0207(19970215)40:3<565::AID-NME80>3.0.CO;2-7
[1617] Ochiai Y., Ser A 39 (1) pp 93– (1996)
[1618] Palle, N. (1993), “An adaptive mesh refinement scheme for solidification problems”, PhD thesis,Univ. of Illinois, Urbana, IL.
[1619] DOI: 10.1007/BF02648957
[1620] DOI: 10.2514/3.599
[1621] Probert E.J., Num. Meth. Therm. Probl. VIII pp 811–
[1622] Ramakrishnan R., 5th Joint Thermophys. Heat Transf. Conf
[1623] DOI: 10.2514/3.11588
[1624] DOI: 10.2514/3.166
[1625] Woo L.W., Ann. Rev. Prog. Appl. Comp. Electromag., Monterey, CA pp 135– (1995)
[1626] DOI: 10.1016/S1364-8152(97)00022-4
[1627] Yukawa N., J. Jpn. Soc. Technol. Plast. 36 (410) pp 248– (1995)
[1628] DOI: 10.1007/BF01742644
[1629] DOI: 10.1016/S0965-9978(98)00040-4 · Zbl 05469525
[1630] DOI: 10.1007/BF00369966 · Zbl 0800.73402
[1631] Belegundu A.D., Str. Dyn. Mater. Conf. pp 2516– (1992)
[1632] DOI: 10.1016/0045-7825(94)00073-5 · Zbl 0849.73064
[1633] DOI: 10.1007/BF01201859 · Zbl 05473445
[1634] Botkin M.E., Str. Dyn. Mater. Conf. pp 815–
[1635] DOI: 10.2514/3.11162
[1636] Danforth R.A., Int. J. Robot. Autom. 15 (1) pp 1– (2000)
[1637] Eggleston T.A., 1997 ASME Press. Vess. Piping Conf. 355 pp 75– (1997)
[1638] Einsfeld R.A., 4th World Cong. Comput. Mech., Buenos Aires pp 511–
[1639] DOI: 10.1002/cnm.1640100506 · Zbl 0853.65097
[1640] DOI: 10.1007/BF01215976 · Zbl 05469975
[1641] DOI: 10.1016/0045-7949(91)90428-O · Zbl 0850.73292
[1642] DOI: 10.1016/0045-7949(94)00441-5 · Zbl 0918.73145
[1643] Im S., 4th World Cong. Comput. Mech., Buenos Aires pp 534– (1998)
[1644] DOI: 10.1299/kikaia.62.1256
[1645] Ko, K.I. (1992), “An adaptive mesh refinement technique for two-dimensional problems and its application to the analysis of shear bands”, PhD thesis,Univ. of Missouri-Rolla, MO.
[1646] DOI: 10.1016/0168-874X(93)90060-4
[1647] DOI: 10.1080/02693799308901970
[1648] DOI: 10.1002/(SICI)1099-0887(199805)14:5<409::AID-CNM152>3.0.CO;2-U · Zbl 0923.73059
[1649] DOI: 10.1061/(ASCE)0733-9399(1993)119:4(667)
[1650] McMorris H., 5th US Nat. Cong. Comput. Mech. pp 201– (1999)
[1651] DOI: 10.1016/0045-7949(94)00359-B
[1652] Pankaj, Comp. Mech. pp 1303– (1991)
[1653] Pastor, 4th Int. Conf. Comp. Plast. pp 683–
[1654] DOI: 10.1016/S0045-7825(96)01070-5 · Zbl 0884.73071
[1655] Rabien U., Ship Tech. Res. 43 (3) pp 115– (1996)
[1656] Spence A.D., 5th ACM Symp. Solid Model. Appl., ACM pp 296–
[1657] DOI: 10.1016/S0010-4485(00)00042-7
[1658] DOI: 10.1016/0927-0256(93)90023-G
[1659] Wang L., 24th NAMRC Conf. pp 1– (1996)
[1660] Weatherby J.R., 5th US Nat. Cong. Comput. Mech. pp 208–
[1661] DOI: 10.1016/S0045-7825(98)00232-1 · Zbl 0957.74061
[1662] DOI: 10.1016/0021-9991(91)90291-R · Zbl 0709.76078
[1663] DOI: 10.1016/0045-7949(96)00117-4 · Zbl 0900.73517
[1664] Zhang S., AIAA J (1993)
[1665] DOI: 10.1016/S0045-7949(96)00309-4 · Zbl 0902.73077
[1666] Ahmad H., SCOREC Rep. 34-1990, Rensselaer Polytechnic Inst. (1990)
[1667] Al-Obaid Y.F., Simul. Technol. Conf.
[1668] Aptukov V.N., 10th Int. Conf. Comp. Meth. Appl. Sci. Eng., INRIA pp 697–
[1669] DOI: 10.1016/0965-9978(95)00075-5 · Zbl 05470162
[1670] Bennis C., Model Conf., Stavanger, SPE pp 307–
[1671] Blacker T., et al. (1994), “CUBIT mesh generation environment 1100
[1672] Carvalho P.C.P., Train. Sci. Tech., CIMNE pp 201– (1990)
[1673] Chen, J. and Taylor, V.E. (1999), “ParaPART: parallel mesh partitioning tool for distributed systems”, 11th IPPS/SPDP’99 Worksh. Springer-Verlag, Berlin, pp.996-1005.
[1674] DOI: 10.1002/(SICI)1096-9128(200002/03)12:2/3<111::AID-CPE470>3.0.CO;2-J · Zbl 02181349
[1675] Coorevits P., Proc. IDMME’96 pp 715–
[1676] De Smet M., 1991 ASME Design Tech. Conf. 36 pp 105–
[1677] DOI: 10.1016/0965-9978(92)90025-B · Zbl 0804.65111
[1678] DOI: 10.1016/S0965-9978(98)00055-6 · Zbl 05469561
[1679] Dubois M., 6th World Cong. FEM pp 147–
[1680] DOI: 10.1109/13.728269
[1681] DOI: 10.1016/0956-0521(94)00024-G
[1682] Freund A., 6th Int. Conf. Math. Meth. Eng. pp 103–
[1683] Gay C., J. Mater. Process. Technol. 34 (1) pp 149– (1992)
[1684] Gerlach J., 2nd Int. Symp. ISCOPE 98 pp 215–
[1685] Globisch, G. (1993), “PARMESH - a parallel mesh generator”, Tech. Rep. SPC 93.3, TU Chemnitz-Zwickau, Germany. · Zbl 0875.68566
[1686] DOI: 10.1016/0167-8191(94)00085-O · Zbl 0875.68566
[1687] Hauser J., Gen. Comp. Fluid Dyn., Elsevier, Amsterdam pp 817– (1991)
[1688] Hemker C.J., 3rd Int. Conf. Comp. Meth. Water Res., CMP pp 469–
[1689] DOI: 10.1016/0965-9978(92)90085-T
[1690] DOI: 10.1016/S0168-874X(99)00024-4 · Zbl 1003.65125
[1691] Iwasa M., 1991 Small Engine Tech. Conf. pp 401– (1991)
[1692] Joe B., Adv. Eng. Software 13 (5) pp 325– (1991)
[1693] DOI: 10.1299/kikaic.61.2455
[1694] DOI: 10.1016/0013-7944(90)90299-V
[1695] Leland R., 7th Int. Meshing Roundtable pp 515–
[1696] DOI: 10.1007/3-540-44520-X_8
[1697] Littlefield D.L., 5th US Nat. Cong. Comput. Mech. pp 287– (1999)
[1698] Lou J.Z., High Perform. Comput. Symp., SCS pp 132–
[1699] Maerten B., Adv. Comp. Mech. High Perf. Comp., Civil-Comp, Edinburgh pp 163– (1998)
[1700] Mandal C., 5th ACM Symp. Solid Model. Appl., ACM pp 191–
[1701] DOI: 10.1016/0045-7949(92)90119-K · Zbl 0825.73004
[1702] DOI: 10.1016/0895-7177(90)90162-G · Zbl 0733.65073
[1703] DOI: 10.2493/jjspe.59.233
[1704] Neugebauer F., Civil-Comp pp 19– (1998)
[1705] Nishi Y., 4th World Cong. Comput. Mech., Buenos Aires pp 154– (1998)
[1706] Nishigaki I., J. Jpn. Soc. Simul. Tech. 18 (2) pp 74– (1999)
[1707] DOI: 10.1002/1097-0207(20000910/20)49:1/2<313::AID-NME935>3.0.CO;2-3 · Zbl 0981.65026
[1708] Noel F., ASME Design Tech. Conf. 2 pp 399–
[1709] Noel F., 2nd Int. Conf. Comp. Struct. Tech. pp 205–
[1710] Novak M., Struct. Eng., Civil-Comp, Edinburgh pp 23– (2000)
[1711] DOI: 10.1007/BF01201899
[1712] Punch E.F., ASCE Eng. Mech. Spec. Conf. Mech. Comp. 1990’ pp 53– (1991)
[1713] DOI: 10.1016/0045-7949(94)90368-9 · Zbl 0872.73064
[1714] Rehling, E. and Diekmann, R. (1998), “PadFEM”, Tech. Rep., Univ. of Paderborn, Germany.
[1715] Santini E., Adv. Electr. Eng. Software pp 109– (1990)
[1716] Sato T., Ser A 39 (3) pp 354– (1996)
[1717] DOI: 10.1002/zamm.19990791313
[1718] DOI: 10.1007/s007910050004 · Zbl 0883.68130
[1719] DOI: 10.1109/38.180117 · Zbl 05085433
[1720] Sluiter M.L.C., 2nd Int. Comp. Eng. Conf., ASME pp 29– (1993)
[1721] DOI: 10.1016/S0965-9978(98)00127-6 · Zbl 05467458
[1722] DOI: 10.1002/cnm.1640110205 · Zbl 0816.73062
[1723] Staten M.L., 7th Int. Meshing Roundtable, Sandia Nat. Lab.
[1724] DOI: 10.1007/s003660050016 · Zbl 0943.65141
[1725] Stein E., Str. Mech., Civil-Comp, Edinburgh pp 191– (1994)
[1726] Stillman D.W., LS-NIKE3D and TOPAZ-3D, Version 3.0”, LSTC Rep 1009, Livermore Softw. Tech (1991)
[1727] DOI: 10.1016/0965-9978(92)90081-P
[1728] Vocilka R., 6th Int. Conf. Math. Meth. Eng. pp 553–
[1729] Walshaw C., Parallel Comp. Fluid Dyn. pp 273–
[1730] Wei C.S., Reliab. Robust. Eng. Softw. II, CMP, Southampton pp 341– (1991)
[1731] Wierse M., 6th Int. Conf. Num. Grid Gener. Comp. Field pp 843–
[1732] Wu, W.T. (1990), “AMG: automated mesh generation for forming simulation”, PhD thesis,The Ohio State Univ., Columbus, OH.
[1733] DOI: 10.1016/0168-874X(95)91148-G · Zbl 0875.65092
[1734] Bern M.W., et al. (Eds) (1999)
[1735] Canann S.A., Trends in Unstructured Mesh Generation (1997)
[1736] Deconinck H., Rhode-St-Genese. (1998)
[1737] Fortune S., Voronoi Diagrams and Delaunay Triangulations. Computing in Euclidean Geometry (1992) · Zbl 0907.68190
[1738] Frey P.J., Mesh Generation Application to Finite Elements (2000) · Zbl 0968.65009
[1739] George P.L., Applications to Finite Methods (1991)
[1740] George P.L., Triangulation de Delaunay et Maillage. Applications aux Elements Finis (1997) · Zbl 0880.65132
[1741] George P.L., Delaunay Triangulation and Meshing. Application to Finite Elements (1998) · Zbl 0908.65143
[1742] Hamann B., Grid Generation, Finite Elements and Feometric Design (1995) · Zbl 0875.65028
[1743] DOI: 10.1007/978-3-662-03949-6
[1744] Papadrakakis M., Advances in Post and Preprocessing for Finite Element Technology (1994)
[1745] DOI: 10.1115/1.3101978
[1746] Thompson J.F., et al. (Eds) (1998)
[1747] Topping B.H.V., Finite Element Mesh Generation · Zbl 0934.65132
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.