×

A two-dimensional theory for the analysis of laminated plates. (English) Zbl 0802.73042

A new displacement-based two-dimensional theory for the analysis of multilayered plates is presented. The theory is based on the only kinematic constraint of transverse inextensibility, whereas no restrictions are imposed on the representation of the in-plane displacement components. A governing system of integral-differential equations is obtained which can be given a closed-form solution for a number of problems where no boundary layer is present. It is also shown that most of the two-dimensional plate models can be directly derived from the presented theory. The possibility of developing asymptotic solutions in the boundary layers is discussed with reference to the problem of a plate in cylindrical bending.

MSC:

74E30 Composite and mixture properties
74K20 Plates
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Alliney, S.; Carnicer, R. S. 1992: A hybrid finite element model for multilayered plates. Comput. Mech. 10: 319-333 · Zbl 0762.73071 · doi:10.1007/BF00364253
[2] Andreev, A. N.; Nemirovskii, Y. V. 1977: On the theory of multilayered elastic anisotropic shells. Izv. Akad. Nauk. SSSR, Mekh. Tverd. Tela 12: 87-96 [Transl. Mech. Solids 12: 73-81]
[3] Arridge, R. G. C.; Barham, P. J.; Farrell, C. J.; Keller, A. 1976: The importance of end effects in the measurement of moduli of highly anisotropic materials. J. Mat. Sci. 11: 788-790 · doi:10.1007/BF01209471
[4] Barrett, K. E.; Ellis, S. 1988: An exact theory of elastic plates. Int. J. Solids Struct. 24: 859-880 · Zbl 0656.73032 · doi:10.1016/0020-7683(88)90038-8
[5] Bhimaraddi, A.; Stevens, L. K. 1984: A higher order theory for free vibration of orthotropic, homogeneous, and laminated rectangular plates. J. Appl. Mech. ASME 51: 195-198 · doi:10.1115/1.3167569
[6] Bickford, W. B. 1982: A consistent higher order beam theory. Dev. Theor. Appl. Mech. 11: 137-150
[7] Chatterjee, S. N.; Ramnath, V. 1988: Modeling laminated composite structures as assemblage of sublaminates. Int. J. Solids Struct. 24: 439-458 · Zbl 0636.73055 · doi:10.1016/0020-7683(88)90001-7
[8] Chepiga, V. E. 1977: On constructing a theory of multilayered anisotropic shells with prescribed arbitrary accuracy of order h N. Izv. Akad. Nauk. SSSR, Meckh. Tverd. Tela 12: 113-120 [Transl. Mech. Solids 12: 98-103]
[9] Choi, I.; Horgan, C. O. 1977: Saint-Venant’s principle and end effects in anisotropic elasticity. J. Appl. Mech. ASME 44: 424-430 · Zbl 0398.73009 · doi:10.1115/1.3424095
[10] Choi, I.; Horgan, C. O. 1978: Saint-Venant end effects for plane deformation of sandwich strips. Int. J. Solids Struct. 14: 187-195 · Zbl 0372.73005 · doi:10.1016/0020-7683(78)90024-0
[11] Ciarlet, P. G.; Destuynder, P. 1979: A justification of the two-dimensional linear plate model. J. Mechanique 18: 315-344 · Zbl 0415.73072
[12] Cicala, P. 1962: Consistent approximations in shell theory. J. Engng. Mech. Div., Proc. Am. Soc. Civ. Engng. 88: 45-74
[13] Davet, J. L.; Destuynder, Ph. 1985: Singularités logaritmiques dans les effects de bord d’une plaque en matériaux composites. J. Mec. Theor. Appl. 4: 56-71 · Zbl 0564.73066
[14] Davet, J. L.; Destuynder, Ph. 1986: Free-edge stress concentration in composite laminates: A boundary layer approach. Comp. Meth. Appl. Mech. Eng. 59: 129-140 · Zbl 0595.73070 · doi:10.1016/0045-7825(86)90098-8
[15] Ericksen, J. L.; Truesdell, C. 1957: Exact theory of stress and strain in rods and shells. Arch. Rat. Mech. Anal. 1: 295-323 · Zbl 0081.39303 · doi:10.1007/BF00298012
[16] Folkes, M. J.; Arridge, R. G. C. 1975: The measurement of shear modulus in highly anisotropic materials: the valiity of St. Venant principle. J. Phys. D 8: 1053-1064 · doi:10.1088/0022-3727/8/9/010
[17] Gol’denveizer, A. L. 1968: Methods for justifying and refining the theory of shells. Prik. Mat. Mekh. 32: 684-695 [Transl. PMM 32: 704-718]
[18] Gol’denveizer, A. L.; Kolos, A. V. 1965: On the derivation of two-dimensional equations in the theory of thin elastic plates. Prik. Mat. Mekh. 29: 141-155 [Transl. PMM 29: 151-166]
[19] Green, A. E.; Naghdi, P. M. 1982: A theory of laminated composite plates. IMA J. Appl. Math. 29: 1-23 · Zbl 0496.73067 · doi:10.1093/imamat/29.1.1
[20] Green, A. E.; Naghdi, P. M.; Wainwrigth, W. L. 1965: A general theory of a Cosserat surface. Arch. Rat. Mech. Anal. 20: 287-308 · doi:10.1007/BF00253138
[21] Gregory, R. D.; Wan, F. Y. M. 1985: On plate theories and Saint Venant’s principle. Int. J. Solids Struct. 10: 1005-1024 · Zbl 0575.73060 · doi:10.1016/0020-7683(85)90052-6
[22] Grigolyuk, E. I.; Kogan, F. A. 1972: State of the art of the theory of multilayered shells. Priklad. Mekh. 8: 3-17 [Transl. Sov. Appl. Mech. 8: 583-595
[23] Horgan, C. O. 1972: On Saint-Venant’s principle in plane anisotropic elasticity. J. Elasticity 2: 169-180 · doi:10.1007/BF00125525
[24] Horgan, C. O. 1982: Saint-Venant end effects in composites. J. Comp. Mat. 16: 411-422 · doi:10.1177/002199838201600506
[25] Koiter, W. T. 1966: On the nonlinear theory of thin elastic shells. Proc. Kon. Ned. ak. Wet. B 69: 1-54
[26] Koiter, W. T. 1969: Foundation and basic equations of shell theory: a survey of recent progress. In: Niordson, F. I. (ed.): IUTAM Symposium on the theory of thin shells. Springer Verlag, Berlin, 93-105 · Zbl 0187.23204
[27] Koiter, W. T.: Simmonds, J. G. 1972: Foundation of shell theory. In: Becker, E.; Mikhailov, G. K. (eds.): Theoretical and applied mechanics. Mosca, Springer Verlag, Berlin, pp. 150-176
[28] Ladeveze, P.1976: Justification de la théorie linéaire des coques élastiques. J. Mecanique 15: 813-856 · Zbl 0356.73067
[29] Lembo, M.; Podio Guidugli, P. 1991: Plate theory as an exact consequence of three-dimensional linear elasticity. Eur. J. Mech., A/Solids 10:485-516 · Zbl 0755.73058
[30] Lewis, E. L. V. 1979: An experimental study of end effects in the extensional deformation of polymers. J. Mat. Sci. 14: 2343-2352 · doi:10.1007/BF00737023
[31] Librescu, L. 1967: On the theory of anisotropic elastic shells and plates. Int. J.Solids Struct. 3:53-68 · doi:10.1016/0020-7683(67)90044-3
[32] Librescu, L., 1975a: Elastostatics and kinetics of anisotropic and heterogeneous shell-type structures. Noordhoff I. P., Leyden · Zbl 0335.73027
[33] Librescu, L. 1975b: Improved linear theory of elastic anisotropic multilayered shells. Mekh. Polimerov 11: 1038-1050 [Transl. Polymer Mech. 11: 885-896]
[34] Lo, K. H.; Christensen, R. M.; Wu, E. M. 1977: A higher-order theory of plate deformation: II) laminated plates. J. Appl. Mech. ASME 44:669-676 · Zbl 0369.73053 · doi:10.1115/1.3424155
[35] Murakami, H. 1986: Laminated composite plate theory with improved in-plate response. J. Appl. Mech. ASME 53: 661-666 · Zbl 0597.73069 · doi:10.1115/1.3171828
[36] Naghdi, P. M. 1972: The theory of shells and plates. In: Flugge, S. (ed.):Handbuch der Physik vol VI-2, Berlin, Springer-Verlag, 425-640
[37] Nayfeh, A. 1973: Perturbation methods. Wiley, J. & Sons, New York · Zbl 0265.35002
[38] Noor, A. K.; Burton, W. S. 1989: Assessment of shear deformation theories for multilayered composite plates. Appl. Mech. Rev. 42: 1-12 · doi:10.1115/1.3152418
[39] Pagano, N. J. 1970: Exact solutions for rectangular bidirectional composites and sandwich plates. J. Comp. Mater. 4: 20-34
[40] Podio Guidugli, P. 1989: An exact derivation of the thin plate equation. J. Elast. 22: 121-133 · Zbl 0692.73049 · doi:10.1007/BF00041107
[41] Poniatovskii, V. V. 1962: Theory for plates of medium thickness. Prik. Mat. Mekh. 26: 335-341 [Transl. PMM 26: 478-486]
[42] Reddy, J. N. 1984: A simple higher-order theory for laminates composite plates. J. Appl. Mech. ASME 51: 745-752 · Zbl 0549.73062 · doi:10.1115/1.3167719
[43] Reddy, J. N. 1986: Applied functional analysis and variational methods in engineering. McGraw-Hill, New York · Zbl 0623.73025
[44] Reddy, J. N. 1987: A generalization of two-dimensional theories of laminated composite plates. Comm. Appl. Num. Meth. 3: 173-180 · Zbl 0611.73072 · doi:10.1002/cnm.1630030303
[45] Reddy, J. N. 1990: A general non-linear third-order theory of plates with moderate thickness. Int. J. Non-Lin. Mech. 25: 677-686 · Zbl 0731.73040 · doi:10.1016/0020-7462(90)90006-U
[46] Rehfield, L. W.; Murthy, P. L. N. 1982: Toward a new engineering theory of bending: fundamentals. AIAA J. 20: 693-699 · Zbl 0488.73037 · doi:10.2514/3.7938
[47] Reissner, E.; Stavsky, Y. 1961: Bending and stretching of certain types of heterogeneous aelotropic elastic plates. J. Appl. Mech. ASME 28:402-408 · Zbl 0100.20904
[48] Savoia, M. 1992: On the analysis of multilayered composite structures. (In Italian), PhD. Dissertation, Bologna, Italy · Zbl 0825.73989
[49] Savoia, M. 1993: A new 2-D approach for an accurate analysis of multilayered plates in bending. To appear
[50] Savoia, M.; Reddy, J. N. 1992: A variational approach to three-dimensional elasticity solutions of laminated composite plates. J. Appl. Mech. ASME 59:S166-S175 · Zbl 0825.73989 · doi:10.1115/1.2899483
[51] Savoia, M.; Tralli, A. 1992: On the accuracy of one-dimensional models for multilayered composite beams. Proceed. of the XI AIMETA Conference, pp. 487-492
[52] Savoia, M.; Laudiero, F.; Tralli, A. 1993a: A refined theory for laminated beams?Part I: A new high order approach. Meccanica 28:38-51 · Zbl 0810.73037
[53] Savoia, M.; Tralli, A.; Laudiero, F. 1993b: A refined theory for laminated beams?Part II: An iterative variational approach. Meccanica 28:217-225 · Zbl 0782.73034 · doi:10.1007/BF00989124
[54] Schmidt, R. 1977: A refined nonlinear theory of plates with transverse shear deformation. J. Indust. Math. Soc. 27:23-38 · Zbl 0364.73052
[55] Srinivas, S. 1973: A refined analysis of composite laminates. J. Sound Vibr. 30:495-507 · Zbl 0267.73050 · doi:10.1016/S0022-460X(73)80170-1
[56] Srinivas, S.; Rao, A. K. 1973: Flexure of thick rectangular plates. J. Appl. Mech. ASME 40:208-299 · doi:10.1115/1.3422947
[57] Truesdell, C.; Noll, W. 1965: The non-linear field theories of mechanics. In: Flugge, S. (ed.): Encylopedia of Physics, III/3, Springer-Verlag, Berlin · Zbl 0779.73004
[58] Vashakmadze, T. S. 1987: On the problem of constructing the mathematical theory of plates and shells. In: Besseling, J. F.; Eckhaus, W. (eds.): Trends in applications of mathematics in mechanics. Springer-Verlag
[59] Vianello, M. 1990: On the active part of the stress for elastic materials with internal constraints. J. Elast. 24: 289-294 · Zbl 0733.73014 · doi:10.1007/BF00115561
[60] Wang, S. S.; Choi, I. 1982: Boundary layer effect in composite laminates. Part I: Free edge stress singularities. J. Appl. Mech. ASME 49:541-548 · Zbl 0504.73042 · doi:10.1115/1.3162514
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.