×

Non-linear influence of hydrostatic pressure on the yielding of asymmetric anisotropic sheet metals. (English) Zbl 1391.74044

Summary: The objective of the current research is the investigation into possible non-linear influence of hydrostatic pressure on yielding of asymmetric (exhibiting the so-called “strength-differential effect”) anisotropic sheet metals. To reach this aim, two yield functions are developed, called here “non-linear pressure sensitive criteria I and II,” (NPC-1 and NPC-2). In addition, the non-associated flow rules are employed for these new criteria. The yield functions are defined as non-linearly dependent on hydrostatic pressure, while the plastic potential functions are introduced to be pressure insensitive. To calibrate these criteria, the yield functions need 10 directional experimental yield stresses and the plastic potential functions need eight Lankford coefficients data points. Four well-known anisotropic sheet metals with different structures, namely AA 2008-T4, a Face Centered Cubic material (FCC), AA 2090-T3, a Face Centered Cubic material (FCC), AZ31, a hexagonal closed packed material (HCP) and high-purity {\(\alpha\)}-titanium (HCP) are considered as case studies. Finally, it is observed that NPC-1 and NPC-2 are more successful than previous criteria in anticipating directional strength and mechanical properties.

MSC:

74E10 Anisotropy in solid mechanics
74C05 Small-strain, rate-independent theories of plasticity (including rigid-plastic and elasto-plastic materials)
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] 1. Spitzig, WA, Richmond, O. The effect of pressure on the flow stress of metals. Acta Metal 1984; 32: 457-463.
[2] 2. Liu, C, Huang, Y, Stout, MG. On the asymmetric yield surface of plastically orthotropic materials: a phenomenological study. Acta Metal 1997; 45: 2397-2406.
[3] 3. Barlat, F, Brem, JC, Yoon, JW. Plane stress yield function for aluminum alloy sheets-part 1: theory. Int J Plast 2003; 19: 1297-1319. · Zbl 1114.74370
[4] 4. Stoughton, TB, Yoon, JW. A pressure-sensitive yield criterion under a non-associated flow rule for sheet metal forming. Int J Plast 2004; 20: 705-731. · Zbl 1254.74111
[5] 5. Hu, W, Wang, ZR. Construction of a constitutive model in calculations of pressure-dependent material. Comput Mater Sci 2009; 46: 893-901.
[6] 6. Hu, W. An orthotropic criterion in a 3-D general stress state. Int J Plast 2005; 21: 1771-1796. · Zbl 1114.74373
[7] 7. Aretz, H. A non-quadratic plane stress yield function for orthotropic sheet metals. J Mater Proc Technol 2009; 36: 246-251. · Zbl 1258.74021
[8] 8. Lee, MG, Wagoner, RH, Lee, JK. Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets. Int J Plast 2008; 24: 545-582. · Zbl 1214.74004
[9] 9. Stoughton, TB, Yoon, JW. Anisotropic hardening and non-associated flow in proportional loading of sheet metals. Int J Plast 2009; 25: 1777-1817. · Zbl 1168.74016
[10] 10. Hu, W, Wang, ZR. Multiple-factor dependence of the yielding behavior to isotropic ductile materials. Comput Mater Sci 2005; 32: 31-46.
[11] 11. Huh, H, Lou, Y, Bae, G, Lee, C. Accuracy analysis of anisotropic yield functions based on the root-mean square error. In: Barlat, F, Moon, YH, Lee, MG (eds) NUMIFORM 2010: Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor O. C. Zienkiewicz (1921-2009), Pohang (Republic of Korea), 13-17 June 2010, vol. 1252, pp.739-746. College Park, Maryland: American Institute of Physics (AIP).
[12] 12. Taherizadeh, A, Green, DE, Yoon, JW. Evaluation of advanced anisotropic models with mixed hardening evaluation of advanced anisotropic models with mixed hardening for general associated and non-associated flow metal plasticity. Int J Plast 2011; 27: 1781-1802. · Zbl 1426.74307
[13] 13. Lou, Y, Huh, H, Yoon, JW. Consideration of strength differential effect in sheet metals with symmetric yield functions. Int J Mech Sci 2013; 66: 214-223.
[14] 14. Safaei, M, Lee, MG, Zang, SL. An evolutionary anisotropic model for sheet metals based on non-associated flow rule approach. Comput Mater Sci 2014; 81: 15-29.
[15] 15. Yoon, JW, Lou, Y, Yoon, J. Asymmetric yield function based on the stress invariants for pressure sensitive metals. Int J Plast 2014; 56: 184-202.
[16] 16. Safaei, M, Yoon, JW, Waele, WD. Study on the definition of equivalent plastic strain under non-associated flow rule for finite element formulation. Int J Plast 2014; 58: 219-238.
[17] 17. Moayyedian, F, Kadkhodayan, M. A study on combination of von Mises and Tresca yield loci in non-associated viscoplasticity. Int J Eng 2014; 27: 537-545.
[18] 18. Oya, T, Yanagimoto, J, Ito, K. Material model based on non-associated flow rule with higher-order yield function for anisotropic metals. Proc Eng 2014; 81: 1210-1215.
[19] 19. Moayyedian, F, Kadkhodayan, M. Combination of modified Yld2000-2d and Yld2000-2d in anisotropic pressure dependent sheet metals. Latin Am J Solids Struct 2015; 12: 92-114.
[20] 20. Moayyedian, F, Kadkhodayan, M. Modified Burzyński criterion with non-associated flow rule for anisotropic asymmetric metals in plane stress problems. Appl Math Mech (English Edition) 2015; 36: 303-318.
[21] 21. Ghaei, A, Taherizadeh, A. A two-surface hardening plasticity model based on non-associated flow rule for anisotropic metals subjected to cyclic loading. Int J Mech Sci 2015; 92: 24-34.
[22] 22. Moayyedian, F, Kadkhodayan, M. An advanced criterion based on non-AFR for anisotropic sheet metals. Struct Eng Mech 2016; 57: 1015-1038.
[23] 23. Nixon, ME, Cazacu, O, Ricardo, AL. Anisotropic response of high-purity α-titanium: Experimental characterization and constitutive modeling. Int J Plast 2010; 26: 516-532. · Zbl 1426.74052
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.