Optimal design of steel frames accounting for buckling.

*(English)*Zbl 1293.74343Summary: A formulation of a special design problem devoted to elastic perfectly plastic steel frame structures subjected to different combinations of static and dynamic loads is presented. In particular, a minimum volume design problem formulation is presented and the structure is designed to be able to elastically behave for the assigned fixed loads, to elastically shakedown in presence of serviceability load conditions and to prevent the instantaneous collapse for suitably chosen combinations of fixed and ultimate seismic loadings as well as of fixed and wind actions. The actions that the structure must suffer are evaluated by making reference to the actual Italian seismic code. The dynamic response of the structure is performed by utilizing a modal technique. In order to prevent other undesired collapse modes further constraints are introduced in the relevant optimization problem taking into account the risk of element buckling. Different applications devoted to flexural frames conclude the paper. The sensitivity of the structural response has been investigated on the grounds of the determination and interpretation of the Bree diagrams of the obtained optimal structures.

##### MSC:

74P10 | Optimization of other properties in solid mechanics |

74H60 | Dynamical bifurcation of solutions to dynamical problems in solid mechanics |

74K10 | Rods (beams, columns, shafts, arches, rings, etc.) |

PDF
BibTeX
XML
Cite

\textit{S. Benfratello} et al., Meccanica 48, No. 9, 2281--2298 (2013; Zbl 1293.74343)

Full Text:
DOI

##### References:

[1] | Banichuk NV (1990) Introduction to optimization of structures. Springer, New York |

[2] | Brousse P (1988) Optimization in mechanics: problems and methods. Elsevier, Amsterdam · Zbl 0659.73073 |

[3] | Cherkaev A (2000) Variational methods in structural optimization. Springer, New York · Zbl 0956.74001 |

[4] | Choi KK, Kim NH (2005) Structural sensitivity analysis and optimization: linear systems. Springer, Berlin |

[5] | Gajewski A, Zyezkowski M (1988) Optimal structural design under stability constraints. Kluwer, Dordrecht |

[6] | Gallagher RH, Zienkiewicz OC (1973) Optimum structural design. Wiley, London |

[7] | Haftka RT, Gürdal Z, Kamat MP (1990) Elements of structural optimization. Kluwer, Dordrecht |

[8] | Haug EJ, Choi KK, Komkov V (1986) Design sensitivity analysis of structural systems. Academic Press, New York |

[9] | Kirsch U (1993) Structural optimization: fundamentals and applications. Springer, Berlin |

[10] | Majid KI (1974) Optimum design of structures. Newnes-Butterworths, London |

[11] | Massonet CE, Save M (1965) Plastic analysis and design. Blaisdell, New York |

[12] | Rozvany GIN (1976) Optimal design of flexural systems. Pergamon Press, Oxford |

[13] | Rozvany GIN (1989) Structural design via optimality criteria. Kluwer, Dordrecht |

[14] | Rozvany GIN (1997) Topology optimization in structural mechanics. Springer, Berlin · Zbl 0873.00017 |

[15] | Save MA, Prager W (1985) Structural optimization. Plenum, New York · Zbl 0649.73042 |

[16] | Stadler W (1988) Multicriteria optimization in engineering and in the sciences. Plenum, New York · Zbl 0669.00028 |

[17] | Cinquini, C; Guerlement, G; Lamblin, D, Finite element iterative methods for optimal elastic design of circular plates, Comput Struct, 12, 85-92, (1980) · Zbl 0441.73114 |

[18] | Cinquini, C; Sacchi, G; Haug, EJ (ed.); Cea, J (ed.), A note on the optimal elastic design for given deflection, No. 1, 383-398, (1981) |

[19] | Cohn, MZ; Parimi, SR, Optimal design of plastic structures for fixed and shakedown loadings, J Appl Mech, 40, 595-599, (1973) |

[20] | Giambanco, F; Palizzolo, L, Optimality conditions for shakedown design of trusses, Comput Mech, 16, 369-378, (1995) · Zbl 0849.73043 |

[21] | Giambanco, F; Palizzolo, L; Cirone, L, Computational methods for optimal shakedown design of FE structures, Struct Optim, 15, 284-295, (1998) |

[22] | Giambanco, F; Palizzolo, L; Polizzotto, C, Optimal shakedown design of beam structures, Struct Optim, 8, 156-167, (1994) |

[23] | Giambanco, F; Palizzolo, L; Polizzotto, C, Optimal shakedown design of circular plates, J Eng Mech, 120, 2535-2555, (1994) |

[24] | König, JA; Sawczuk, A (ed.); Mroz, Z (ed.), On optimum shakedown design, 405-414, (1975), Berlin |

[25] | Atkociunas J (2011) Optimal shakedown design of elastic-plastic structures. Technika, Vilnius |

[26] | Maier, G; Srinivasan, R; Save, M, Optimal plastic design, J Struct Mech, 4, 349-378, (1976) |

[27] | Maier, G; Zavelani Rossi, A; Benedetti, D, A finite element approach to optimal design of plastic structures in plane stress, Int J Numer Methods Eng, 4, 455-473, (1972) · Zbl 0251.73059 |

[28] | Caffarelli, A; Giambanco, F; Palizzolo, L, Optimal design: a comparison between different criteria, Busan, Korea |

[29] | Palizzolo, L, Optimization of continuous elastic perfectly plastic beams, Comput Struct, 82, 397-411, (2004) |

[30] | Palizzolo, L; Caffarelli, A, A multicriteria optimal design for FE discretized structures, Chennai, India, December 1-10, Duluth |

[31] | Caffarelli, A; Giambanco, F; Palizzolo, L, No ratchet design of trusses, Busan, Korea, August 21-23 |

[32] | Giambanco, F; Palizzolo, L; Caffarelli, A, An optimal plastic shakedown design, Prague, Czech Republic, September 4-6 |

[33] | Palizzolo, L, Non-ratchet design of beam structures, Chania, Crete |

[34] | Giambanco, F; Palizzolo, L; Caffarelli, A, Computational procedures for plastic shakedown design of structures, J Struct Multidiscip Optim, 28, 317-329, (2004) |

[35] | Palizzolo, L, Optimal design of trusses according to a plastic shakedown criterion, J Appl Mech, 71, 240-246, (2004) · Zbl 1111.74586 |

[36] | Benfratello, S; Giambanco, F; Palizzolo, L, Optimal design of structures under dynamic loading, Ancona (Italy), September 14-17 |

[37] | Benfratello, S; Giambanco, F; Palizzolo, L, P-delta effect in structural optimization, Lisbona, Portogallo, September 6-9 |

[38] | Giambanco, F; Benfratello, S; Palizzolo, L; Tabbuso, P, Multicriterion design of frames with constraints on buckling, Bologna, September 12-15 |

[39] | Giambanco, F; Palizzolo, L; Caffarelli, A; Henrnandez, S (ed.); Brebbia, CA (ed.), Optimum design of structures with limited ductility, Skiathos, Grecia, May 23-25, Ashurst |

[40] | Szyszkowski, W; Watson, LG, Optimization of the buckling load of columns and frames, Eng Struct, 10, 249-256, (1988) |

[41] | Wang, CM; Kitipornchai, S; Thevendran, V, Optimal designs of I-beams against lateral buckling, J Eng Mech, 116, 1902-1923, (1990) |

[42] | Panigrahi, SK; Chakravety, S; Mishra, BK, Vibration based damage detection in a uniform strength beam using genetic algorithm, Meccanica, 44, 697-710, (2009) · Zbl 1258.74109 |

[43] | Paya-Zaforteza, I; Yepes, V; González-Vidosa, F; Hospitaler, A, On the Weibull cost estimation of building frames designed by simulated annealing, Meccanica, 45, 693-704, (2010) · Zbl 1337.62391 |

[44] | Ghashochi Bargh, H; Sadr, MH, Stacking sequence optimization of composite plates for maximum fundamental frequency using particle swarm optimization algorithm, Meccanica, 47, 719-730, (2012) · Zbl 1293.74345 |

[45] | Corne D, Dorigo M, Glover F (1999) New ideas in optimization. McGraw-Hill, Cambridge |

[46] | Mitchell M (1998) An introduction to genetic algorithms. MIT Press, Cambridge · Zbl 0906.68113 |

[47] | Nocedal J, Wright SJ (1999) Numerical optimization. Springer, New York · Zbl 0930.65067 |

[48] | Repubblica Italiana (2008) Consiglio Superiore dei Lavori Pubblici, Norme Tecniche per le Costruzioni. D.M. 14 gennaio 2008 |

[49] | European Committee for Standardization (1992) Eurocode 3: Design of steel structures, Part 1-1: General rules and rules for buildings |

[50] | Scibilia N (2010) Progetto di strutture in acciaio. Dario Flaccovio Editore, Palermo, Italy |

[51] | Merkevičiūtė, D; Atkočiūnas, J, Optimal shakedown design of metal structures under stiffness and stability constraints, J Constr Steel Res, 62, 1270-1275, (2006) |

This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.