×

Modelling and analysis of dynamic frictional interactions of vibro-driven capsule systems with viscoelastic property. (English) Zbl 1406.74510

Summary: This paper studies the dynamic frictional interactions of the underactuated vibro-driven capsule systems with the viscoelastic property. Frictional dynamics of the capsule systems is an active research domain, while the online implementation and control of the friction models are still intractable tasks. This paper investigates the frictional characteristics of the capsule systems in the dynamic regime, including particularly the non-reversible drooping and hysteresis. Firstly, the frictional interaction dynamics is modelled and characterized using a combined physics-based and analytical-based approach. Subsequently, the qualitative changes in the capsule dynamics and friction-induced vibrational responses that triggered by multiple control parameters are discussed. It is found that the capsule dynamics is mainly periodic, and the motion velocity of the capsule systems can be controlled by appropriate tuning of the control parameters around the identified control points. Simulation results have a good agreement with the experimentally observed frictional characteristics. The effectiveness of the proposed method is verified in terms of satisfaction of the energy requirements and quenching of the friction-induced vibrations. It is also found that the frictional interaction dynamics of the capsule systems can be predicted for a wide range of vibrational behaviours. Finally, the importance of a concrete understanding and accurate description of the dynamic friction at the sliding substrate is highlighted.

MSC:

74M10 Friction in solid mechanics
74H45 Vibrations in dynamical problems in solid mechanics
PDFBibTeX XMLCite
Full Text: DOI Link

References:

[1] Al-Bender, F.; Swevers, J., Characterization of friction force dynamics, IEEE Contr. Syst. Mag., 28, 64-81 (2008) · Zbl 1395.74066
[2] Alexander, R.; Dimery, N. J.; Ker, R. F., Elastic structures in the back and their role in galloping in some mammals, J. Zool., 207, 467-482 (1985)
[3] Armstrong-Hélouvry, B.; Dupont, P.; De Wit, C. C., A survey of models, analysis tools and compensation methods for the control of machines with friction, Automatica, 30, 1083-1138 (1994) · Zbl 0800.93424
[4] Astrom, K. J.; Canudas-De-Wit, C., Revisiting the LuGre friction model, Control Syst. IEEE, 28, 101-114 (2008) · Zbl 1395.74065
[5] Becker, T. C.; Mahin, S. A., Effect of support rotation on triple friction pendulum bearing behavior, Earthq. Eng. Struct. Dynam., 42, 1731-1748 (2013)
[6] Biswas, S.; Chatterjee, A., A reduced-order model from high-dimensional frictional hysteresis, (Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences (2014), The Royal Society), 20130817
[7] Bolotnik, N. N.; Figurina, T. Y., Optimal control of the rectilinear motion of a rigid body on a rough plane by means of the motion of two internal masses, J. Appl. Math. Mech., 72, 126-135 (2008) · Zbl 1189.70033
[8] Casini, P.; Giannini, O.; Vestroni, F., Persistent and ghost nonlinear normal modes in the forced response of non-smooth systems, Phys. Nonlinear Phenom., 241, 2058-2067 (2012)
[9] Chatterjee, S., Non-linear control of friction-induced self-excited vibration, Int. J. Non Lin. Mech., 42, 459-469 (2007) · Zbl 1200.70032
[10] Chernous’ ko, F. L., The optimum rectilinear motion of a two-mass system, J. Appl. Math. Mech., 66, 1-7 (2002)
[11] Chernous’ko, F. L., Analysis and optimization of the rectilinear motion of a two-body system, J. Appl. Math. Mech., 75, 493-500 (2011) · Zbl 1272.70037
[12] Chowdhury, M. A.; Helali, M., The effect of amplitude of vibration on the coefficient of friction for different materials, Tribol. Int., 41, 307-314 (2008)
[13] De Wit, C. C.; Olsson, H.; Astrom, K. J.; Lischinsky, P., A new model for control of systems with friction, Autom. Control IEEE Trans. On, 40, 419-425 (1995) · Zbl 0821.93007
[14] Dimery, N. J.; Alexander, R.; Ker, R. F., Elastic extension of leg tendons in the locomotion of horses (Equus caballus), J. Zool., 210, 415-425 (1986)
[15] Fang, H.; Xu, J., Stick-slip effect in a vibration-driven system with dry friction: sliding bifurcations and optimization, J. Appl. Mech., 81, 051001 (2013), 051001
[16] Fang, H.; Xu, J., Dynamics of a mobile system with an internal acceleration-controlled mass in a resistive medium, J. Sound Vib., 330, 4002-4018 (2011)
[17] Fang, H.-B.; Xu, J., Controlled motion of a two-module vibration-driven system induced by internal acceleration-controlled masses, Arch. Appl. Mech., 82, 461-477 (2012) · Zbl 1293.70077
[18] Fang, H. B.; Xu, J., Dynamic analysis and optimization of a three-phase control mode of a mobile system with an internal mass, J. Vib. Contr., 17, 19-26 (2011) · Zbl 1271.70059
[19] Giannini, O.; Casini, P.; Vestroni, F., Experimental evidence of bifurcating nonlinear normal modes in piecewise linear systems, Nonlinear Dynam., 63, 655-666 (2011)
[20] H. B. Fang, J. X., Dynamic analysis and optimization of a three-phase control mode of a mobile system with an internal mass, J. Vib. Control - J VIB CONTROL, 16 (2010)
[21] Hetzler, H.; Schwarzer, D.; Seemann, W., Analytical investigation of steady-state stability and Hopf-bifurcations occurring in sliding friction oscillators with application to low-frequency disc brake noise, Commun. Nonlinear Sci. Numer. Simulat., 12, 83-99 (2007) · Zbl 1112.34021
[22] Huda, M. N.; Yu, H., Trajectory tracking control of an underactuated capsubot, Aut. Robots, 39, 183-198 (2015)
[23] Kim, J.-S.; Sung, I.-H.; Kim, Y.-T.; Kim, D.-E.; Jang, Y.-H., Analytical model development for the prediction of the frictional resistance of a capsule endoscope inside an intestine, Proc. Inst. Mech. Eng. [H], 221, 837-845 (2007)
[24] Li, H.; Furuta, K.; Chernousko, F. L., Motion generation of the capsubot using internal force and static friction, (Decision and Control, 2006 45th IEEE Conference on (2006)), 6575-6580
[25] Liu, P.; Yu, H.; Cang, S., Optimized adaptive tracking control for an underactuated vibro-driven capsule system, Nonlinear Dynam., 1-15 (2018)
[26] Liu, P.; Yu, H.; Cang, S., Trajectory synthesis and optimization of an underactuated microrobotic system with dynamic constraints and couplings, Int. J. Contr. Autom. Syst., 1-11 (2018)
[27] Liu, P.; Yu, H.; Cang, S., On the dynamics of a vibro-driven capsule system, Arch. Appl. Mech., 1-21 (2018)
[28] Liu, P.; Yu, H.; Cang, S., Geometric analysis-based trajectory planning and control for underactuated capsule systems with viscoelastic property, Trans. Inst. Meas. Contr. (2017), 0142331217708833
[29] Liu, P.; Yu, H.; Cang, S., Modelling and dynamic analysis of underactuated capsule systems with friction-induced hysteresis, (Intelligent Robots and Systems (IROS), 2016 IEEE/RSJ International Conference on (2016), IEEE), 549-554
[30] Liu, P.; Yu, H.; Cang, S., On periodically pendulum-diven systems for underactuated locomotion: a viscoelastic jointed model, (Automation and Computing (ICAC), 2015 21st International Conference on (2015))
[31] Liu, P.; Yu, H.; Cang, S., Modelling and control of an elastically joint-actuated cart-pole underactuated system, (Automation and Computing (ICAC), 2014 20th International Conference on (2014), IEEE), 26-31
[32] Liu, Y.; Pavlovskaia, E.; Hendry, D.; Wiercigroch, M., Vibro-impact responses of capsule system with various friction models, Int. J. Mech. Sci., 72, 39-54 (2013)
[33] Liu, Y.; Wiercigroch, M.; Pavlovskaia, E.; Yu, H., Modelling of a vibro-impact capsule system, Int. J. Mech. Sci., 66, 2-11 (2013)
[34] McMahon, T. A., The role of compliance in mammalian running gaits, J. Exp. Biol., 115, 263-282 (1985)
[35] McMillan, A. J., A NON-LINEAR FRICTION MODEL FOR SELF-EXCITED VIBRATIONS, J. Sound Vib., 205, 323-335 (1997) · Zbl 1235.74253
[36] Neis, P. D.; De Baets, P.; Ost, W.; Delgado, Y. P.; Loccufier, M.; Al-Bender, F.; Ferreira, N. F.; Lorini, F. J., Investigation of the dynamic response in a dry friction process using a rotating stick-slip tester, Wear, 271, 2640-2650 (2011)
[37] Olsson, H.; Åström, K. J.; Canudas de Wit, C.; Gäfvert, M.; Lischinsky, P., Friction models and friction compensation, Eur. J. Contr., 4, 176-195 (1998) · Zbl 0932.74052
[38] Outirba, B.; Hendrick, P., Experimental testing of carbon brush seals for aero engines bearing chambers, (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition (2014), American Society of Mechanical Engineers), V05CT16A017-V05CT16A017
[39] Saha, A.; Wahi, P.; Wiercigroch, M.; Stefański, A., A modified LuGre friction model for an accurate prediction of friction force in the pure sliding regime, Int. J. Non Lin. Mech., 80, 122-131 (2016)
[40] Stefański, A.; Wojewoda, J.; Wiercigroch, M.; Kapitaniak, T., Regular and chaotic oscillations of friction force, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 220, 273-284 (2006)
[41] Wojewoda, J.; Stefański, A.; Wiercigroch, M.; Kapitaniak, T., Hysteretic effects of dry friction: modelling and experimental studies, Philos. Trans. R. Soc. Lond. Math. Phys. Eng. Sci., 366, 747-765 (2008) · Zbl 1153.70302
[42] Zhan, X.; Xu, J., Locomotion analysis of a vibration-driven system with three acceleration-controlled internal masses, Adv. Mech. Eng., 7 (2015), 1687814015573766
[43] Zhang, C.; Liu, H.; Li, H., Experimental investigation of intestinal frictional resistance in the starting process of the capsule robot, Tribol. Int., 70, 11-17 (2014)
[44] Zhang, C.; Liu, H.; Tan, R.; Li, H., Modeling of velocity-dependent frictional resistance of a capsule robot inside an intestine, Tribol. Lett., 47, 295-301 (2012)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.