Width modification for gears with low contact ratio.

*(English)*Zbl 1258.70007Summary: In this study, teeth width modification on spur gears with low contact ratios is introduced. The modification essentially relies on maintaining constant Hertz surface pressure along single and double teeth profiles. With this aim, adjustments were made in tooth width along the single mesh area. It is intended that, with this modification, negative effects caused by high Hertz pressures along the single mesh area will either be minimized or completely removed.

##### MSC:

70B15 | Kinematics of mechanisms and robots |

Full Text:
DOI

##### References:

[1] | Tsukamoto N, Maruyama H, Shi J (1986) Investigation about prevention of tooth profile change of nylon gears. Bull JSME 29:1927–1933 |

[2] | Naruse C, Haizuka S, Nemoto R (1986) Studies on frictional loss, temperature rise and limiting load for scoring of spur gear. Bull JSME 29:600–608 |

[3] | Yozhizaki M, Naruse C, Nemoto R, Haizuka S (1991) Study on frictional loss of spur gears. Tribol Trans 34:138–146 |

[4] | Mao K (2006) Gear tooth contact analysis and its application in the reduction of fatigue wear. Wear 262:1281–1288 |

[5] | Wang WS, Fong ZH (2008) A dual face-hobbing method for the cycloidal crowning of spur gears. Mech Mach Theory 43:1416–1430 · Zbl 1273.70005 |

[6] | Tavakoli MS, Houser DR (1986) Optimum profile modifications for the minimization of static transmission errors of spur gears. Trans ASME J Mech Transm Automat Des 108:86–95 |

[7] | Kubo A, Kiyono S (1980) Vibrational excitation of cylindrical involute gears due to tooth form error. Bull JSME 23(183):1536–1543 |

[8] | Litvin FL, Fuentes A, Gonzalez-Perez I, Carnevali L, Kawasaki K, Handschuh RF (2003) Modified involute helical gears: computerized design, simulation of meshing, and stress analysis. Comput Methods Appl Mech Eng 192:3619–3655 · Zbl 1054.70500 |

[9] | Wang Y, Cheung HME, Zhang WJ (2001) A finite element approach to dynamic modeling of flexible spatial link-gear systems. Mech Mach Theory 36(4):469–487 · Zbl 1140.70447 |

[10] | Li S (2007) Effects of machining errors, assembly errors and tooth modifications on loading capacity, load-sharing ratio and transmission error of a pair of spur gears. Mech Mach Theory 42:698–726 · Zbl 1330.70033 |

[11] | Seol IH, Kim DH (1998) The kinematic and dynamic analysis of crowned spur gear drive. Comput Methods Appl Mech Eng 167:109–118 · Zbl 0963.70514 |

[12] | Kim CH (2006) Durability improvement method for plastic spur gears. Tribol Int 39:1454–1461 |

[13] | Tsukamoto N, Terashima K (1986) Development of plastic gears for power transmission. Trans Jpn Soc Mech Eng 29(247):249–255 |

[14] | Senthilvelan S, Gnanamoorthy R (2006) Effect of gear tooth filet radius on the performance of injection molded Nylon 6/6 gears. Mater Des 27:632–639 |

[15] | \.Imrek H, Düzcükoğlu H (2007) Relation between wear and tooth width modification in spur gears. Wear 262:390–394 |

[16] | Düzcükoğlu H, \.Imrek H (2008) A new method for preventing premature pitting formation on spur gears. Eng Fract Mech 75:4431–4438 |

[17] | \.Imrek H (2009) Performance improvement method for Nylon 6 spur gears. Tribol Int 42:503–510 |

[18] | \.Imrek H, Fırat V, Khalfan OM (2006) Using finite element method to investigate a spur gear whose width is modified. In: International conference on modeling and simulation, Konya, Turkey, 2006, pp 249–253 |

[19] | Townsend DP (1992) Dudley’s gear handbook. McGraw-Hill, New York |

[20] | Juvinall RC, Marshek KM (1991) Fundamentals of machine components design, 2nd edn. Wiley, New York |

[21] | Mao K (2007) Numerical method for polymer composite gear flash temperature prediction. Wear 262:1321–1329 |

[22] | Asi O (2006) Fatigue failure of a helical gear in a gearbox. Eng Fail Anal 13:1116–1125 |

[23] | Glodez S, Ren Z, Flasker J (1999) Surface fatigue of gear teeth flanks. Comput Struct 73:475–483 · Zbl 1049.74763 |

[24] | Singh A, Houser DR, Vijayakar S (1996) Early detection of gear pitting. In: ASME Power Transmission and Gearing Conf, DE-vol 88, 1996, pp 673–678 |

[25] | \.Imrek H (1995) Investigation of influences of tooth profiles upon scoring phenomena. PhD thesis, University of Selcuk, Konya, Turkey |

This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.