Wang, Kai; Hu, Tao; Hassabou, Abdel H.; Spinnler, Markus; Polifke, Wolfgang Analyzing and modeling the dynamic thermal behaviors of direct contact condensers packed with PCM spheres. (English) Zbl 1343.80010 Contin. Mech. Thermodyn. 25, No. 1, 23-41 (2013). Summary: Condensers serve as important components for humidification-dehumidification (HDH) desalination plants. Based on the interpenetration continua approach with volume averaging technique, a mathematical dynamic model for analyzing the heat and mass transfer within direct contact condensers with co-current or countercurrent flow arrangement was developed. It was validated against the experimental data from a small scale HDH desalination system. Comparisons including the productivities and the temperature profiles of gas, liquid, and solid phases show good agreement with the measurements. Phase change material (PCM) melting processes have little effect on water production rate for co-current flow arrangement, but the condenser packed with PCM capsules have higher water production rates than that packed with air capsules packed under given conditions. The relative humidity profile of the bulk gas shows contrary trend with the gas temperature profile. The direct contact condenser with countercurrent flow arrangement can provide much better heat and mass transfer between gas and water and produce about 16.3 % more fresh water than the same condenser with co-current flow arrangement in 4 h under given conditions. MSC: 80A20 Heat and mass transfer, heat flow (MSC2010) Keywords:modeling; direct contact; condensation; packed bed; phase change material (PCM); desalination; flow arrangement PDFBibTeX XMLCite \textit{K. Wang} et al., Contin. Mech. Thermodyn. 25, No. 1, 23--41 (2013; Zbl 1343.80010) Full Text: DOI References: [1] Zamen M., Amidpour M., Soufari S.M.: Cost optimization of a solar humidification dehumidification desalination unit using mathematical programming. Desalination 239, 92–99 (2009) · doi:10.1016/j.desal.2008.03.009 [2] Mehrgoo M., Amidpour M.: Constructal design of humidification–dehumidification desalination unit architecture. Desalination 271, 62–71 (2011) · doi:10.1016/j.desal.2010.12.011 [3] Parekh S., Farid M.M., Selman J.R., Al-hallaj S.: Solar desalination with a humidification–dehumidification technique–a comprehensive technical review. Desalination 160(2), 167–186 (2004) · doi:10.1016/S0011-9164(04)90007-0 [4] Dawoud B., Zurigat Y.H., Klitzing B., Aldoss T., Theodoridis G.: On the possible techniques to cool the condenser of seawater greenhouses. Desalination 195(1–3), 119–140 (2006) · doi:10.1016/j.desal.2005.09.038 [5] Klausner J.F., Li Y., Mei R.W.: Evaporative heat and mass transfer for the diffusion driven desalination process. Heat Mass Transf. 42, 528–536 (2006) · doi:10.1007/s00231-005-0649-2 [6] Swift A.H.P., Lu H., Becerra H.: Zero Discharge Waste Brine Management for Desalination Plants. Desalination Research and Development Program Report. University of Texas at El Paso, Texas (2002) [7] Li Y., Klausner J.F., Mei R., Knight J.: Direct contact condensation in packed beds. Int. J. Heat Mass Transf. 49, 4751–4761 (2006) · Zbl 1105.80005 · doi:10.1016/j.ijheatmasstransfer.2006.06.013 [8] Marques C.A.X., Fontes C.H., Embirucu M., Kalid R.A.: Efficiency control in a commercial counter flow wet cooling tower. Energy Convers. Manage. 50(11), 2843–2855 (2009) · doi:10.1016/j.enconman.2009.07.006 [9] Alnaimat F., Klausner J.F., Mei R.: Transient analysis of direct contact evaporation and condensation within packed beds. Int. J. Heat Mass Transf. 54, 3381–3393 (2011) · Zbl 1219.80019 · doi:10.1016/j.ijheatmasstransfer.2011.03.048 [10] Hu T., Hassabou A.H., Spinnler M., Polifke W.: Performance analysis and optimization of direct contact condensation in a PCM fixed bed regenerator. Desalination 280(1–3), 232–242 (2011) · doi:10.1016/j.desal.2011.07.008 [11] Weislogel M.M., Chung J.N.: Experimental investigation on condensation heat transfer in small arrays of PCM-filled spheres. Int. J. Heat Mass Transf. 34, 31–45 (1991) · doi:10.1016/0017-9310(91)90170-J [12] VafaiK K., Sozen M.: An investigation of a latent heat storage packed bed and condensing flow through it. J. Heat Transf. Asme 112, 1014–1022 (1990) · doi:10.1115/1.2910473 [13] Hassabou, A.H., Spinnler, M., Hanafi, A., Polifke, W.: Experimental analysis of PCM-supported humidification–dehumidification desalination system. In: IDA World Congress on Desalination and Water Reuse, IDAWC/DB09-289, Dubai (2009) [14] Arkar C., Medved S.: Influence of accuracy of thermal property data of a phase change material on the result of a numerical model of a packed bed latent heat storage with spheres. Thermochim. Acta 438, 192–201 (2005) · doi:10.1016/j.tca.2005.08.032 [15] Wakao N., Kaguei S.: Heat and Mass Transfer in Packed Beds. Gordon and Breach Science, New York (1982) [16] Kaviany M.: Principles of Heat Transfer in Porous Media. 2nd edn. Springer, New York (1995) · Zbl 0889.76002 [17] Ismail K.A.R., Stuginsky R. Jr: A parametric study on possible fixed bed models for PCM and sensible heat storage. Appl. Therm. Eng. 19, 757–787 (1999) · doi:10.1016/S1359-4311(98)00081-7 [18] Alnaimat F., Klausner J.F.: Solar diffusion driven desalination for decentralized water production. Desalination 289, 35–44 (2012) · doi:10.1016/j.desal.2011.12.028 [19] Voller V.R.: An overview of numerical methods for solving phase change regenerator system. In: Minkowycz, W.J., Sparrow, E.M. (eds) Advances in Numerical Heat Transfer, pp. 341–359. Taylor and Francis, London (1997) [20] Torab H., Beasley D.E.: Optimization of a packed bed thermal storage unit. J. Sol. Energy Eng. Asme 109, 170–175 (1987) · doi:10.1115/1.3268201 [21] Stichlmair J., Bravo J.L., Fair J.R.: General model for prediction of pressure drop and capacity of countercurrent gas/liquid packed columns. Gas Sep. & Purif 3, 19–28 (1989) · doi:10.1016/0950-4214(89)80016-7 [22] Onda K., Takeuchi H., Okumoto Y.: Mass transfer coefficients between gas and liquid phases in packed columns. J. Chem. Eng. Jpn. 1, 56–61 (1968) · doi:10.1252/jcej.1.56 [23] Klausner J.F., Li Y., Darwish M., Mei R.W.: Innovative diffusion driven desalination process. Trans. ASME J. Energy Res. Asme. 126, 219–225 (2004) · doi:10.1115/1.1786927 [24] Sun J., Besant R.W.: Heat and mass transfer during silica gel-moisture interactions. Int. J. Heat Mass Transf. 48, 4953–4962 (2005) · doi:10.1016/j.ijheatmasstransfer.2005.02.043 [25] Schlünder E.-U., Tsotsas E.: Wärmeübertragung in Festbetten, durchmischten Schüttgütern und Wirbelschichten Thieme. Stuttgart, New York (1988) [26] Galloway T.R., Sage B.H.: A model of the mechanism of transport in packed, distended, and fluidized beds. Chem. Eng. Sci. 25, 495–516 (1970) · doi:10.1016/0009-2509(70)80048-3 [27] Bauer T.H.: A general analytical approach toward the thermal conductivity of porous media. Int. J. Heat Mass Transf. 36, 4181–4191 (1993) · Zbl 0789.73006 · doi:10.1016/0017-9310(93)90080-P This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.