×

zbMATH — the first resource for mathematics

Analysis of nano-plates by atomistic-refined models accounting for surface free energy effect. (English) Zbl 1402.74069
Summary: This work presents several higher-order atomistic-refined models for the static and free vibration analysis of nano-plates. Stemming from a two-dimensional approach and thanks to a compact notation for the a priori kinematic field approximation over the plate through-the-thickness direction, a general model derivation is used where the approximation order is a free parameter of the formulation. Several higher-order plate theories can be obtained straightforwardly. Classical plate models, such as Kirchhoff’s and Reissner’s, are obtained as particular cases. The assumed constitutive equations for orthotropic materials are those derived by R. Dingreville et al. [J. Mech. Phys. Solids 53, No. 8, 1827–1854 (2005; Zbl 1120.74683)], which account for the surface free energy effect as well as the third-order elastic constants. The resulting stiffness coefficients depend upon the thickness. The governing equations and boundary conditions are variationally obtained through the principle of virtual displacements. A Navier-type, strong form solution is adopted. Simply supported plates are, therefore, investigated. Static and free vibration analyses are carried out in order to investigate the effect of the thickness side as well as the crystallographic plane orientation on the mechanical response. Plates with different values of the side-to-thickness ratio are considered. Results are validated in terms of accuracy and computational costs toward three-dimensional FEM solutions. Numerical investigations show the advantages of refined plate models over the classical ones demonstrating that accurate results can be obtained with reduced computational costs.

MSC:
74K20 Plates
74A60 Micromechanical theories
82D80 Statistical mechanics of nanostructures and nanoparticles
Software:
FADBAD++; ANSYS
PDF BibTeX XML Cite
Full Text: DOI
References:
[1] Sander D.: Surface stress: implications and measurements. Curr. Opin. Solid State Mater. Sci. 7, 51–57 (2003)
[2] Muller P., Saul A.: Elastic effects on surface physics. Surface Science Reports 54, 157–258 (2004)
[3] Cammarate R.C., Sieradzki K.: Effects of surface stress on the elastic moduli of thin films and superlattices. Phys. Rev. Lett. 62, 2005–2008 (1989)
[4] Sun C.T., Zhang H.: Size-dependent elastic moduli of platelike nanomaterials. J. Appl. Phys. 93, 1212–1218 (2003)
[5] Dingreville R., Qu J., Cherkaoui M.: Surface free energy and its effect on the elastic behavior of nano-sized particles, wires and films. J. Mech. Phys. Solids 53, 1827–1854 (2005) · Zbl 1120.74683
[6] Dingreville R., Qu J.: A semi-analytical method to compute surface elastic properties. Acta Materialia 55, 141–147 (2007)
[7] Dingreville, R.: Modeling and characterization of the elastic behavior of interfaces in nanostructured materials: from an atomistic description to a continuum approach. Ph.D. thesis, George W. Woodruff School of Mechanical Engineering, Atlanta, USA (2007)
[8] Zhen Y., Chu C.: A deformation-fluctuation hybrid method for fast evaluation of elastic constants with many-body potentials. Comput. Phys. Commun. 183, 261–265 (2012)
[9] Cui, Z., Sun, Y., Li, J., Qu, J.: Combination method for the calculation of elastic constants. Phys. Rev. B Condens. Matter Mater. Phys.75, 214101-1–214101-6 (2007)
[10] Gurtin M.-E., Murdoch A.-I.: A continuum theory of elastic material surfaces. Arch. Ration. Mech. Anal. 57, 291–323 (1975) · Zbl 0326.73001
[11] Park, H.-S., Klein, P.-A.: Surface Cauchy–Born analysis of surface stress effects on metallic nanowires. Phys. Rev. B 75, 085408-1–085408-9 (2007)
[12] Park H.-S., Klein P.-A.: A surface Cauchy–Born model for silicon nanostructures. Comput. Methods Appl. Mech. Eng. 197, 3249–3260 (2008) · Zbl 1159.74312
[13] Park H.-S., Klein P.-A.: Surface stress effects on the resonant properties of metal nanowires: the importance of finite deformation kinematics and the impact of the residual surface stress. J. Mech. Phys. Solids 56, 3144–3166 (2008) · Zbl 1175.74009
[14] Lim C.W., He L.H.: Size-dependent nonlinear response of thin elastic films with nano-scale thickness. Int. J. Mech. Sci. 46, 1715–1726 (2004) · Zbl 1098.74640
[15] Lu P., He L.H., Lee H.P., Lu C.: Thin plate theory including surface effects. Int. J. Solids Struct. 43, 4631–4647 (2006) · Zbl 1120.74602
[16] Carrera E.: Theories and finite elements for multilayered plates and shells: a unified compact formulation with numerical assessment and benchmarking. Arch. Comput. Methods Eng. 10, 215–296 (2003) · Zbl 1140.74549
[17] Carrera E., Giunta G.: Hierarchical evaluation of failure parameters in composite plates. AIAA J. 47, 692–702 (2009)
[18] Carrera E., Giunta G.: Exact, hierarchical solutions for localised loadings in isotropic, laminated and sandwich shells. J. Press. Vessel Technol. 131, 041202 (2009)
[19] Giunta G., Biscani F., Belouettar S., Carrera E.: Hierarchical modelling of doubly curved laminated composite shells under distributed and localised loadings. Compos. Part B Eng. 42, 682–691 (2011)
[20] Biscani F., Giunta G., Belouettar S., Carrera E., Hu H.: Variable kinematic plate elements coupled via Arlequin method. Int. J. Numer. Methods Eng. 91, 1264–1290 (2012)
[21] Giunta G., Koutsawa Y., Belouettar S., Hu H.: Static, free vibration and stability analysis of three-dimensional nano-beams by atomistic refined models accounting for surface free energy effect. Int. J. Solids Struct. 50, 1460–1472 (2013) · Zbl 1402.74069
[22] Buerger M.J.: Elementary Crystallography. Wiley, New York (1963) · Zbl 0098.44605
[23] Gruber A., Gspann J., Hoffmann H.: Nanostructures produced by cluster beam lithography. Appl. Phys. A Mater. Sci. Process. 68, 197–201 (1999)
[24] Plimpton S.J.: Fast parallel algorithms for short-range molecular dynamics. J. Comput. Phys. 117, 1–19 (1995) · Zbl 0830.65120
[25] Press W.H., Teukolsky S.A., Vetterling W.T., Flannery B.P.: Numerical Recipes: The Art of Scientific Computing. Cambridge University Press, Cambridge (2007) · Zbl 1132.65001
[26] Daw M.S., Baskes M.I.: Embedded-atom method: derivation and application to impurities, surfaces, and other defects in metals. Phys. Rev. B 29, 6443–6453 (1984)
[27] Stauning, O., Bendtsen, C.: FADBAD++ web page. URL: http://www.fadbad.com/fadbad.html (2003)
[28] Carrera E., Brischetto S.: Analysis of thickness locking in classical, refined and mixed multilayered plate theories. Compos. Struct. 82, 549–562 (2008)
[29] Carrera E., Brischetto S.: Analysis of thickness locking in classical, refined and mixed theories for layered shells. Compos. Struct. 85, 83–90 (2008)
[30] Reddy J.N.: Energy principles and variational methods in applied mechanics, 2nd edn. Wiley, New york (2002)
[31] ANSYS®, ANSYS® v12.0 theory manual, ANSYS® Inc., Southpointe, PA (2009)
[32] Madenci E., Guven I.: The finite element method and applications in engineering using ANSYS®. Springer, USA (2006)
[33] Demasi L.: Three-dimensional closed form solutions and exact thin plate theories for isotropic plates. Compos. Struct. 80, 183–195 (2007)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.