×

Research on springback control in stretch bending based on iterative compensation method. (English) Zbl 1435.74015

Summary: An unavoidable problem in the stretch-bending process is springback, which dictates the shape and dimensional accuracy of the product. This problem can be solved by adjusting the geometry of the die or through active process control. This study focuses on the design of the die shape to achieve the target product. Based on the fixed-point iterative method and displacement adjustment (DA) method, this paper proposes an iterative compensation method, which has a higher convergence rate, lower number of iterations, and higher precision compared to the DA method with only one control parameter. In addition, like the DA method, the proposed method does not depend on the material properties or mechanical model, but the difference is that it can quickly and effectively find out the iteration parameter, determine whether the parameter has convergence or not, and has no compensation factor. According to the deviation of iterative parameters between the value after stretch bending and the target value, the iterative compensation method can be used to calculate the compensation magnitude and compensation direction of the iterative parameter. For stretch-bending processes with invariable- and variable-curvature die shapes, the convergence of control parameters is verified mathematically with the convergence theorem of the method, and experiments are conducted to verify the iterative compensation method. The experimental results show that the target products can be obtained with a small number of iterations without knowing the specific material properties.

MSC:

74D99 Materials of strain-rate type and history type, other materials with memory (including elastic materials with viscous damping, various viscoelastic materials)
74C99 Plastic materials, materials of stress-rate and internal-variable type
35Q74 PDEs in connection with mechanics of deformable solids
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Xiaoqiang, L.; Zengqiang, C.; Junbiao, W., Progress in the research on profile stretch bending process, Aeronautical Manufacturing Technology, 4, 80-82 (2004)
[2] Jin, C. F.; Wu, J., Study on stretch-bending process for aluminium profile, Mechanical Engineering & Automation, 3, 211-212 (2010)
[3] Yi, X.; Luo-xing, L.; Guang-yao, L., Extrusion bending: method, application and recent development, Journal of Plasticity Engineering, 15, 3, 61-67 (2008)
[4] Zhao, J.; Zhai, R.; Qian, Z.; Ma, R., A study on springback of profile plane stretch-bending in the loading method of pretension and moment, International Journal of Mechanical Sciences, 75, 10, 45-54 (2013) · doi:10.1016/j.ijmecsci.2013.06.008
[5] Kuwabara, T.; Takahashi, S.; Akiyama, K., 2-D springback analysis for stretch-bending processes based on total strain theory, Transactions of the Society of Automotive Engineers, 5, 504-513 (1995)
[6] El-Domiaty, A., Stretch forming of beams of non-uniform section, Journal of Materials Processing Technology, 22, 1, 21-28 (1990) · doi:10.1016/0924-0136(90)90139-l
[7] Liu, T.; Wang, Y.; Wu, J., Springback analysis of Z & T-section 2196-T8511 and 2099-T83 Al-Li alloys extrusions in displacement controlled cold stretch bending, Journal of Materials Processing Technology, 225, 295-309 (2015) · doi:10.1016/j.jmatprotec.2015.05.024
[8] Lingbeek, R. A.; Gan, W.; Wagoner, R. H.; Meinders, T.; Weiher, J., Theoretical verification of the displacement adjustment and springforward algorithms for springback compensation, International Journal of Material Forming, 1, 3, 159-168 (2008) · doi:10.1007/s12289-008-0369-5
[9] Gan, W.; Wagoner, R. H., Die design method for sheet springback, International Journal of Mechanical Sciences, 46, 7, 1097-1113 (2004) · doi:10.1016/j.ijmecsci.2004.06.006
[10] Lingbeek, R. A.; Huétink, J.; Ohnimus, S., Iterative springback compensation of NUMISHEET benchmark #1, Proceedings of the AIP Conference Proceedings · doi:10.1063/1.2011241
[11] Lingbeek, R.; Meinders, T.; Ohnimus, S.; Juster, N.; Rosochowski, A., Springback compensation: fundamental topics and practical application, Proceedings of the 9th ESAFORM Conference
[12] Yang, X. A.; Ruan, F., A die design method for springback compensation based on displacement adjustment, International Journal of Mechanical Sciences, 53, 5, 399-406 (2011) · doi:10.1016/j.ijmecsci.2011.03.002
[13] Siswanto, W. A.; Anggono, A. D.; Omar, B., An alternate method to springback compensation for sheet metal forming, The Scientific World Journal, 2014 (2014) · doi:10.1155/2014/301271
[14] Karafillis, A. P.; Boyce, M. C., Tooling design in sheet metal forming using springback calculations, International Journal of Mechanical Sciences, 34, 2, 113-131 (1992) · doi:10.1016/0020-7403(92)90077-t
[15] Cheng, H. S.; Cao, J.; Xia, Z. C., An accelerated springback compensation method, International Journal of Mechanical Sciences, 49, 3, 267-279 (2007) · doi:10.1016/j.ijmecsci.2006.09.008
[16] Cafuta, G.; Mole, N.; Štok, B., An enhanced displacement adjustment method: springback and thinning compensation, Materials & Design, 40, 3, 476-487 (2012) · doi:10.1016/j.matdes.2012.04.018
[17] Zhang, Z.; Wu, J.; Zhang, S.; Wang, M.; Guo, R.; Guo, S., A new iterative method for springback control based on theory analysis and displacement adjustment, International Journal of Mechanical Sciences, 105, 330-339 (2016) · doi:10.1016/j.ijmecsci.2015.11.005
[18] Lingbeek, R.; Huétink, J.; Ohnimus, S., The development of a finite elements based springback compensation tool for sheet metal products, Journal of Materials Processing Technology, 169, 1, 115-125 (2003) · doi:10.1016/j.jmatprotec.2005.04.027
[19] Xiong, W.; Gan, Z.; Xiong, S.; Xia, Y., Rapid springback compensation for age forming based on quasi Newton method, Chinese Journal of Mechanical Engineering, 27, 3, 551-557 (2014) · doi:10.3901/cjme.2014.03.551
[20] Ma, R.; Wang, C.; Zhai, R., An iterative compensation algorithm for springback control in plane deformation and its application, Chinese Journal of Mechanical Engineering, 494, 14, 62-69 (2018) · doi:10.1186/s10033-019-0339-5
[21] Li, Q.; Wang, N.; Yi, D., Numerical Analysis (2006), Wuhan, China: Huazhong University of Science & Technology Press, Wuhan, China
[22] Zhao, J.; Yin, J.; Ma, R.; Ma, L., Springback equation of small curvature plane bending, Science China Technological Sciences, 54, 9, 2386-2396 (2011) · Zbl 1237.74016 · doi:10.1007/s11431-011-4447-4
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.