×

Functionally graded hollow cylinder under pressure and thermal loading: effect of material parameters on stress and temperature distributions. (English) Zbl 1423.74017

Summary: This study presents an analytical solution of stresses and displacements in a long functionally graded (FGM) hollow cylinder subjected to uniform heat generation and internal pressure. Thermo-elastic material properties of FGM cylinder continuously vary in radial direction along the thickness with a power function. The temperature distribution is assumed to vary as a function of the radial coordinate and in steady state. Stress formulation approach is employed using the Airy stress function to derive the analytical solution. In the failure analysis of FGM cylinder, Coulomb-Mohr theory is applied for the ceramic phase whereas Tresca yield criterion is used for the metal phase. The stress analysis reveals that stresses in FGM cylinder decrease considerably, compared to the homogenous one, for a particular interval of material parameters. Radial displacement analysis in FGM cylinder supports the results obtained from stress analysis.

MSC:

74A10 Stress
74F05 Thermal effects in solid mechanics
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Awaji, H.; Sivakumar, R., Temperature and stress distribution in hollow cylinder of functionally graded material: the case of temperature independent material properties, Journal of the American Ceramic Society, 84, 1059-1065, (2001)
[2] Erdogan, F.; Ozturk, M., Periodic cracking of functionally graded coatings, International Journal of Engineering Science, 33, 2179-2195, (1995) · Zbl 0899.73421
[3] Golak, S.; Dolata, A. J., Fabrication of functionally graded composites using a homogenised low-frequency electromagnetic field, Journal of Composite Materials, 50, 13, 1751-1760, (2016)
[4] Jabbari, M.; Shahryari, E.; Haghighat, H.; Eslami, M. R., An analytical solution for steady state three dimensional thermoelasticity of functionally graded circular plates due to axisymmetric loads, European Journal of Mechanics - A/Solids, 47, 124-142, (2014) · Zbl 1406.74041
[5] Jabbari, M.; Sohrabpour, S.; Eslami, M. R., Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads, International Journal of Pressure Vessels and Piping, 79, 493-497, (2002)
[6] Kiani, K., Thermo-elasto-dynamic analysis of axially functionally graded non-uniform nanobeams with surface energy, International Journal of Engineering Science, 106, 57-76, (2016) · Zbl 1423.74491
[7] Koizumi, M., FGM activities in Japan, Composites Part B-Engineering, 28, 1-4, (1997)
[8] Li, L.; Hu, Y., Nonlinear bending and free vibration analyses of nonlocal strain gradient beams made of functionally graded material, International Journal of Engineering Science, 107, 77-97, (2016) · Zbl 1423.74496
[9] Li, L.; Li, X.; Hu, Y., Free vibration analysis of nonlocal strain gradient beams made of functionally graded material, International Journal of Engineering Science, 102, 77-92, (2016) · Zbl 1423.74399
[10] Ootao, Y.; Akai, T.; Tanigawa, Y., Three-dimensional transient thermal stress analysis of a nonhomogeneous hollow circular cylinder due to a moving heat source in the axial direction, Journal of Thermal Stresses, 18, 497-512, (1995)
[11] Ootao, Y.; Fukuda, T.; Tanigawa, Y., Transient thermal stress analysis of a multi-layered composite laminate cylinder and its analytical extension of non-homogeneous materials, Theoretical and Applied Mechanics Letters, 38, 177-188, (1989) · Zbl 0724.73021
[12] Ootao, Y.; Tanigawa, Y.; Fukuda, T., Axisymmetric transient thermal stress analysis of a multilayered composite hollow cylinder, Journal of Thermal Stresses, 14, 201-213, (1991)
[13] Ozturk, A.; Gulgec, M., Elastic-plastic stress analysis in a long functionally graded solid cylinder with fixed ends subjected to uniform heat generation, International Journal of Engineering Science, 49, 1047-1061, (2011) · Zbl 06923497
[14] Praveen, G. N.; Chin, C. D.; Reddy, J. N., Thermoelastic analysis of functionally graded ceramic-metal cylinder, Journal of Engineering Mechanics ASCE 1999, 125, 1259-1267, (2001)
[15] Salehipour, H.; Shahidi, A. R.; Nahvi, H., Modified nonlocal elasticity theory for functionally graded materials, International Journal of Engineering Science, 90, 44-57, (2015) · Zbl 1423.74138
[16] Shao, Z. S., Mechanical and thermal stresses of a functionally graded circular hollow cylinder with finite length, International Journal of Pressure Vessels and Piping, 82, 155-163, (2005)
[17] Tanigawa, Y.; Oka, N.; Akai, T.; Kawamura, R., One-dimensional transient thermal stress problem for nonhomogeneous hollow circular cylinder and its optimization of material composition for thermal stress relaxation, JSME International Journal, Series A: Solid Mechanics and Material Engineering, 40, 117-127, (1997)
[18] Tarn, J. Q., Exact solutions for functionally graded anisotropic cylinders subjected to thermal and mechanical loads, International Journal of Solids and Structures, 38, 8189-8206, (2001) · Zbl 1016.74020
[19] Tutuncu, N.; Ozturk, M., Exact solutions for stresses in functionally graded pressure vessels, Composites Part B-Engineering, 32, 683-686, (2001)
[20] Yang, Y. Y., Time dependent stress analysis in functionally graded materials, International Journal of Solids and Structures, 37, 7593-7608, (2000) · Zbl 0984.74006
[21] Wang, C. T., Applied elasticity, (1953), McGraw-Hill Book Company New York · Zbl 0053.43902
[22] Şentürk, A.; Işik, H.; Evci, C., Thermo-mechanically coupled thermal and stress analysis of interior ballistics problem, International Journal of Thermal Sciences, 104, 39-53, (2016)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.