×

Three-dimensional numerical solution for wear prediction using a mortar contact algorithm. (English) Zbl 1352.74199

Summary: A finite element formulation to compute the wear between three-dimensional flexible bodies that are in contact with each other is presented. The contact pressure and the bodies displacements are calculated using an augmented Lagrangian approach in combination with a mortar method, which defines the contact kinematics. The objective of this study is to characterize the wear rate coefficients for bimetallic pairs and to numerically predict the wear depths in new component designs. The proposed method is first validated with the classical pin-on-disc problem. Then, experimental results of wear for the metallic pairs used in internal combustion engine valves and inserts are presented and are taken as a reference solution. An example is provided that shows agreement of the numerical and experimental solution. Finally, the proposed algorithm is used to predict the wear in an application example: the wear in an internal combustion engine valve.

MSC:

74M15 Contact in solid mechanics
74S05 Finite element methods applied to problems in solid mechanics
65N30 Finite element, Rayleigh-Ritz and Galerkin methods for boundary value problems involving PDEs
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Meng, Wear models and predictive equations: their form and content, Wear 181-183 (Part 2) pp 443– (1995) · doi:10.1016/0043-1648(95)90158-2
[2] Holm, Electric Contacts (1946)
[3] Archard, Contact and rubbing flat surfaces, Journal of Applied Physics 24 pp 981– (1953) · doi:10.1063/1.1721448
[4] Chun K Hong J Lee H A study on engine valve and seat insert wearing depending on speed change SAE Technical Paper Series 2004-01-1655
[5] Cattaneo, Sul contatto di due corpi elastici: distribuzione locale degli sforzi, Rendiconti dell’Accademia Nazionale dei Lincei 27 pp 342– (1938)
[6] Mindlin, Compliance of elastic bodies in contact, Transactions of the ASME, Series E Journal of Applied Mechanics 16 pp 259– (1949) · Zbl 0034.26602
[7] Jourdan, An implicit numerical method for wear modeling applied to a hip joint prosthesis problem, Computer Methods in Applied Mechanics and Engineering 198 pp 2209– (2009) · Zbl 1227.74035 · doi:10.1016/j.cma.2009.02.017
[8] Strömberg, Finite element treatment of two-dimensional thermoelastic wear problems, Computer Methods in Applied Mechanics and Engineering 177 pp 441– (1999) · Zbl 0965.74072 · doi:10.1016/S0045-7825(98)00392-2
[9] Mukrasa, Numerical integration schemes and parallel computation for wear prediction using finite element method, Wear 266 pp 822– (2009) · doi:10.1016/j.wear.2008.12.016
[10] AbuBakar, Wear prediction of friction material and brake squeal using the finite element method, Wear 264 pp 1069– (2008) · doi:10.1016/j.wear.2007.08.015
[11] Lee, Microscale experimental and modeling wear studies of rail steels, Wear 271 pp 1174– (2011) · doi:10.1016/j.wear.2011.05.021
[12] Dhia, Modeling and computation of fretting wear of structures under sharp contact, International Journal for Numerical Methods in Engineering 85 pp 61– (2011) · Zbl 1217.74088 · doi:10.1002/nme.2958
[13] Páczel, On optimal contact shapes generated by wear, International Journal for Numerical Methods in Engineering 63 pp 1250– (2005) · Zbl 1138.74378 · doi:10.1002/nme.1321
[14] Rodriguez-Tembleque, A boundary elements formulation for 3D fretting-wear problems, Engineering Analysis with Boundary Elements 35 pp 935– (2011) · Zbl 1259.74066 · doi:10.1016/j.enganabound.2011.03.002
[15] Rodriguez-Tembleque, A boundary element formulation for wear modeling on 3D contact and rolling-contact problems, International Journal of Solids and Structures 47 pp 2600– (2010) · Zbl 1196.74274 · doi:10.1016/j.ijsolstr.2010.05.021
[16] Sfantos, A boundary element formulation for three-dimensional sliding wear simulation, Wear 262 pp 672– (2007) · doi:10.1016/j.wear.2006.08.008
[17] Sfarni, Numerical and experimental study of automotive riveted clutch discs with contact pressure analysis for the prediction of facing wear, Finite Elements in Analysis and Design 44 pp 129– (2011) · doi:10.1016/j.finel.2010.08.007
[18] Podra, Simulating sliding wear with finite element method, Tribology International 32 pp 71– (1999) · doi:10.1016/S0301-679X(99)00012-2
[19] Papadopoulos P Taylor R Technical Report UCB/ SEMM Report 90/18 1990
[20] Simo, A perturbed Lagrangian formulation for the finite element solution of contact problems, Computational Methods in Applied Mathematics 50 pp 163– (1985) · Zbl 0552.73097
[21] Puso, A mortar segment-to-segment contact method for large deformation solid mechanics, Computer Methods in Applied Mechanics and Engineering 193 pp 601– (2004) · Zbl 1060.74636 · doi:10.1016/j.cma.2003.10.010
[22] Man, Bem frictional contact analysis: modelling considerations, Engineering Analysis with Boundary Elements 11 pp 77– (1993) · doi:10.1016/0955-7997(93)90081-U
[23] Johnson, Contact Mechanics (1987)
[24] Cavalieri, An augmented Lagrangian technique combined with a mortar algorithm for modelling mechanical contacts problems, International Journal for Numerical Methods in Engineering 93 (4) pp 420– (2013) · Zbl 1352.74198 · doi:10.1002/nme.4391
[25] Cavalieri, CD-ROM proceedings Multibody Dynamics 2011, ECCOMAS Thematic Conference (2011)
[26] Ashby, Temperature maps for frictional heating in drysliding, Tribology Transactions 34 (4) pp 577– (1991) · doi:10.1080/10402009108982074
[27] Cantizano, Numerical simulation of wear-mechanism maps, Computational Materials Sience 25 pp 54– (2002) · doi:10.1016/S0927-0256(02)00249-5
[28] Lim, Wear mechanism maps, Acta Metallurgica 35 (1) pp 1– (1978) · doi:10.1016/0001-6160(87)90209-4
[29] Rabinowicz, The least wear, Wear 100 (1-3) pp 533– (1984) · doi:10.1016/0043-1648(84)90031-0
[30] Kato K Wear mechanisms in new direction in tribology Hutchings I Mechanical Engineering Publications London 1997 39 56
[31] Bayer, Mechanical Wear Prediction and Prevention (1994)
[32] Peterson, Wear Control Handbook (1980)
[33] Kato, Tribology in Practice Series, in: Materials, Mechanisms and Practice pp 9– (2005)
[34] Puso, A mortar segment-to-segment frictional contact method for large deformations, Computer Methods in Applied Mechanics and Engineering 193 pp 4891– (2004) · Zbl 1112.74535 · doi:10.1016/j.cma.2004.06.001
[35] Bergheau, Finite Element Simulation of Heat Transfer (2010)
[36] Popp, A dual mortar approach for 3D finite deformation contact with consistent linearization, International Journal for Numerical Methods in Engineering 83 pp 1428– (2010) · Zbl 1202.74183 · doi:10.1002/nme.2866
[37] Zenklusen, SAE International, Proceedings 21st SAE Brasil International Congress and Exhibition Mobility Technology (2012)
[38] Rabinowicz, Friction and Wear of Materials, 2. ed. (1995)
[39] Dyson, Scuffing - A review, Tribology International 8 pp 77– (1975) · doi:10.1016/0301-679X(75)90056-0
[40] Zenklusen, SAE International, Proceedings 21st SAE Brasil International Congress and Exhibition Mobility Technology (2012)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.