zbMATH — the first resource for mathematics

Event-triggered communication and \(H_\infty\) control co-design for networked control systems. (English) Zbl 1319.93022
Summary: This paper studies an event-triggered communication scheme and an \(H_\infty\) control co-design method for networked control systems (NCSs) with communication delay and packet loss. First, an event-triggered communication scheme and a sampled-state-error dependent model for NCSs are presented. In this scheme and model, (a) the sensor takes samples in a periodic manner; (b) a triggering condition is applied to the sampled signal to determine whether a signal is transmitted to the controller or not; and (c) the closed-loop system with a networked state feedback controller is modeled as a time-delay system. Secondly, by constructing a novel Lyapunov-Krasovskii functional, three theorems for the system asymptotical stability subject to imperfect communications are derived. Thirdly, a new algorithm is developed for the triggering condition and the controller feedback gain to meet the specified performance. This design algorithm is based on the two permissible limits on the signal transfer. These limits are: the maximum allowable communication delay bound and the maximum allowable number of successive packet losses, respectively. Finally, the proposed co-design method is demonstrated by two numerical examples.

93B36 \(H^\infty\)-control
Full Text: DOI
[1] Anta, A.; Tabuada, P., To sample or not to sample: self-triggered control for nonlinear systems, IEEE Transactions on Automatic Control, 55, 9, 2030-2042, (2010) · Zbl 1368.93355
[2] Camacho, A., Martí, P., Velasco, M., Lozoya, C., Villà, R., & Fuertes, J.M. et al. (2010). Self-triggered networked control systems: An experimental case study. In IEEE international conference on industrial technology (pp. 123-128).
[3] Heemels, W. P.M. H.; Gorter, R. J.A.; van Zijl, A.; Van den Bosch, P. P.J.; Weiland, S.; Hendrix, W. H.A., Asynchronous measurement and control: a case study on motor synchronization, Control Engineering Practice, 7, 12, 1467-1482, (1999)
[4] Donkers, M. C.F.; Heemels, W. P.M. H., Output-based event-triggered control with guaranteed \(L_\infty\) gain and improved and decentralised event-triggering, IEEE Transactions on Automatic Control, 57, 6, 1362-1376, (2012) · Zbl 1369.93362
[5] Gao, H. J.; Chen, T. W.; Lam, J., A new delay system approach to network-based control, Automatica, 44, 1, 39-52, (2008) · Zbl 1138.93375
[6] Gu, K.; Kharitonov, V. L.; Chen, J., Stability of time-delay systems, (2003), Birkhauser · Zbl 1039.34067
[7] He, Y.; Liu, G. P.; Rees, D.; Wu, M., Improved stabilisation method for networked control systems, IET Control Theory & Applications., 1, 6, 1580-1585, (2007)
[8] Hespanha, J. P.; Naghshtabrizi, P.; Xu, Y. G., A survey of recent results in networked control systems, Proceeding of the IEEE, 95, 1, 138-162, (2007)
[9] Jiang, X.; Han, Q.-L., Delay-dependent robust stability for uncertain linear systems with interval time-varying delay, Automatica, 42, 6, 1059-1065, (2006) · Zbl 1135.93024
[10] Kim, D. S.; Lee, Y. S.; Kwon, W. H.; Park, H. S., Maximum allowable delay bounds of networked control systems, Control Engineering Practice, 11, 11, 1301-1313, (2003)
[11] Mazo, M.; Anta, A.; Tabuada, P., An ISS self-triggered implementation of linear controllers, Automatica, 46, 8, 1310-1314, (2010) · Zbl 1205.93081
[12] Oliveira, R. C.L. F.; Peres, P. L.D., \(L M I\) conditions for robust stability analysis based on polynomially parameter-dependent Lyapunov functions, Systems & Control Letters, 55, 1, 52-61, (2006) · Zbl 1129.93485
[13] Park, P. G.; Ko, J. W.; Jeong, C., Reciprocally convex approach to stability of systems with time-varying delays, Automatica, 47, 1, (2011) · Zbl 1209.93076
[14] Peng, C.; Tian, Y.-C.; Yue, D., Output feedback control of discrete-time systems in networked environments, IEEE Transactions on Systems, Man and Cybernetics, Part A (Systems and Humans), 41, 1, 185-190, (2011)
[15] Tabuada, P., Event-triggered real-time scheduling of stabilizing control tasks, IEEE Transactions on Automatic Control, 52, 9, 1680-1685, (2007) · Zbl 1366.90104
[16] Velasco, M., Fuertes, J.M., & Martí, P. (2003). The self triggered task model for real-time control systems. In Work-in-progress of the 24th IEEE real-time systems symposium (RTSS) (pp. 67-70).
[17] Wang, X.; Lemmon, M. D., Event-triggering in distributed networked control systems, IEEE Transactions on Automatic Control, 56, 3, 586-601, (2011) · Zbl 1368.93211
[18] Wang, X.; Lemmon, M. D., Self-triggering under state-independent disturbances, IEEE Transactions on Automatic Control, 55, 6, 1494-1500, (2010) · Zbl 1368.93363
[19] Wang, X.; Lemmon, M., Self-triggered feedback control systems with finite-gain \(\mathcal{L}_2\) stability, IEEE Transactions on Automatic Control, 45, 3, 452-467, (2009) · Zbl 1367.93354
[20] Xiong, J.; Lam, J., Stabilization of linear systems over networks with bounded packet loss, Automatica, 43, 1, 80-87, (2007) · Zbl 1140.93383
[21] Xu, Y., & Hespanha, J.P. (2004). Optimal communication logics in networked control systems. In Proc. 43st IEEE conf. decision and control, Vol. 4 (pp. 3527-3532).
[22] Yang, T.-C., Networked control system: a brief survey, IET Control Theory & Applications, 153, 4, 403-412, (2006)
[23] Yang, F.; Wang, Z.; Hung, Y. S.; Gani, M., \(H_\infty\) control for networked systems with random communication delays, IEEE Transactions on Automatic Control, 51, 3, 511-518, (2006) · Zbl 1366.93167
[24] Yook, J. K.; Tilbury, D. M.; Soparkar, N. R., Trading computation for bandwidth: reducing communication in distributed control systems using state estimators, IEEE Transactions on Control Systems Technology, 10, 4, 503-518, (2002)
[25] Yue, D.; Han, Q.-L.; Peng, C., State feedback controller design of networked control systems, IEEE Transactions on Circuits and Systems II: Express Briefs, 51, 640-644, (2004)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.