×

Comparison of turbulence models in simulating swirling pipe flows. (English) Zbl 1201.76090

Summary: Swirling flow is a common phenomenon in engineering applications. A numerical study of the swirling flow inside a straight pipe was carried out in the present work with the aid of the commercial CFD code fluent. Two-dimensional simulations were performed, and two turbulence models were used, namely, the RNG \(k-\epsilon \) model and the Reynolds stress model. Results at various swirl numbers were obtained and compared with available experimental data to determine if the numerical method is valid when modeling swirling flows. It has been shown that the RNG \(k-\epsilon \) model is in better agreement with experimental velocity profiles for low swirl, while the Reynolds stress model becomes more appropriate as the swirl is increased. However, both turbulence models predict an unrealistic decay of the turbulence quantities for the flows considered here, indicating the inadequacy of such models in simulating developing pipe flows with swirl.

MSC:

76F65 Direct numerical and large eddy simulation of turbulence

Software:

FLUENT
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Kitoh, O., Experimental study of turbulent swirling flow in a straight pipe, J. Fluid Mech., 225, April, 445-479 (1991)
[2] Li, H.; Tomita, Y., Characteristics of swirling flow in a circular pipe, J. Fluids Eng., Trans. ASME, 116, 2, 370-373 (1994)
[3] Rocklage-Marliani, G.; Schmidts, M.; Vasanta Ram, I., Three-dimensional laser-doppler velocimeter measurements in swirling pipe flow, Flow Turbulence Combust., 70, 1-4, 43-67 (2003) · Zbl 1113.76387
[4] Kobayashi, T.; Yoda, M., Modified \(k- &z.epsiv;\) model for turbulent swirling flow in a straight pipe, JSME Int. J., 30, 259, 66-71 (1987)
[6] Jakirlic, S.; Hanjalic, K.; Tropea, C., Modeling rotating and swirling turbulent flows: a perpetual challenge, AIAA J., 40, 10, 1984-1996 (2002)
[9] Pope, S. B., Turbulent Flows (2000), Cambridge University Press · Zbl 0802.76033
[11] Hrenya, C. M.; Bolio, E. J.; Chakrabarti, D.; Sinclair, J. L., Comparison of low reynolds number \(k- &z.epsiv;\) turbulence models in predicting fully developed pipe flow, Chem. Eng. Sci., 50, 12, 1923-1941 (1995)
[13] Clayton, B. R.; Morsi, Y. S.M., Determination of principal characteristics of turbulent swirling flow along annuli: part 1: measurement of time mean parameter, Int. J. Heat Fluid Flow, 5, 195-203 (1984)
[14] Clayton, B. R.; Morsi, Y. S.M., Determination of principal characteristics of turbulent swirling flow along annuli: part 2: measurement of turbulence components, Int. J. Heat Fluid Flow, 6, 31-41 (1985)
[15] Morsi, Y. S.M.; Clayton, B. R., Determination of principal characteristics of turbulent swirling flow along annuli: part 3: numerical analysis, Int. J. Heat Fluid Flow, 7, 208-222 (1986)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.