×

Numerical integration of linear boundary value problems in solid mechanics by segmentation method. (English) Zbl 0461.73070


MSC:

74S30 Other numerical methods in solid mechanics (MSC2010)
65D30 Numerical integration
74-04 Software, source code, etc. for problems pertaining to mechanics of deformable solids
PDF BibTeX XML Cite
Full Text: DOI

References:

[1] Aktas, Int. J. num. Meth. Engng 11 pp 771– (1977)
[2] and , ’Analysis of conical shells’, Midwest Applied Science Corporation (MASC), Report No. 57-7 (1957).
[3] and , ’Analysis of non-circular cylindrical shells’, Proc. Int. Symp. on Shell Structures, International Association of Shell and Spatial Structures, Budapest, Hungary (1965).
[4] ’Large deflection elastic-plastic analysis of axisymmetric shells of revolution’, Ph.D. thesis, Michigan Technological University, 91-92 (1970).
[5] Gill, Proc. Camb. Phil. Soc. 96-108 (1951)
[6] Introduction to Numerical Analysis, McGraw-Hill, 1956, pp. 188-201.
[7] and (Eds.), Mathematical Methods for Digital Computers, Wiley, 1960, pp. 95-120.
[8] Zarghamee, AIAA J. 5 pp 1256– (1967)
[9] Folie, J. Engng Mech. Div., ASCE, Proceedings 96 pp 1297– (1970)
[10] Kalnins, J. Appl. Mech., Trans. ASME 31 pp 467– (1964)
[11] Cohen, AIAA J. 2 pp 932– (1964)
[12] Mason, AIAA J. 3 pp 1307– (1965)
[13] ’Direct stiffness analysis of branched shells of revolution using numerical integration procedure’, Report No. 70, The Institute of Science and Engineering Research, University of Akron (1970).
[14] Zudans, J. Engng Ind., Trans. ASME 92 pp 818– (1970)
[15] Lestingi, Comp. Struct. 3 pp 133– (1973)
[16] ’Numerical analysis of stiffened shells of revolution’, NASA CR-2273 (1973).
[17] Carter, J. Engng Mech. Div. ASCE, Proceedings 95 pp 1033– (1969)
[18] Padovan, Comp. Struct. 4 pp 1159– (1974)
[19] Anderson, Comp. Struct. 1 pp 157– (1971)
[20] ’Computer analysis of ring-stiffened shells of revolution’, NASA CR-2085 (1972).
[21] Hutchins, Comp. Meth. Appl. Mech. Engng 1 pp 316– (1972)
[22] Radbill, AIAA J. 2 pp 1860– (1964)
[23] Jordan, AIAA J. 4 pp 923– (1966)
[24] Miller, AIAA J. 5 pp 811– (1967)
[25] Cohen, J. Appl. Mech. Trans. ASME 41 pp 261– (1974) · Zbl 0289.73050
[26] Cohen, Comp. Meth. Appl. Mech. Engng 8 pp 301– (1976)
[27] ’Computer analysis of shells’, Proc. Symp. on Theory of Shells, to honour L. H. Donnell, 1966, University of Houston Press, Houston, 5; (1967).
[28] Kant, J. Aeronaut. Soc. India 25 pp 47– (1973)
[29] Ramesh, Int. J. Pressure Vessels Piping 2 pp 143– (1974)
[30] and , ’Analysis of thick orthotropic shells’, Proc. IASS World Congr. on Space Enclosures Montreal, 401-409 (1976).
[31] and , ’Numerical analysis of pressure vessels using various shell theories’, Res. Rep. IIT-B/CE 79, Department of Civil Engineering, Indian Institute of Technology, Bombay (1979).
[32] ’Thermal stresses in nonhomogeneous shells of revolution:theory and analysis’, Res. Rep. IIT-B/CE 79-1, Department of Civil Engineering, Indian Institute of Technology, Bombay (1979).
[33] and , ’Numerical analysis of Mindlin plate by segmentation method’, to be published.
[34] ’The segmentation method in the analysis of elastic plates with two opposite edges simply supported using a refined higher order theory’, to be published.
[35] ’On transverse shear force distribution in a Mindlin plate simply supported on two opposite edges and free on the remaining edges’, in preparation.
[36] ’On transverse shear force distribution in an elastic plate simply supported on two opposite edges and free on the remaining edges based on a refined higher order theory’, in preparation.
[37] ’Two numerical methods for the solution of two-dimensional eddy current problems’, Ph.D. thesis, Department of Engineering, University of Reading, Whiteknights, Reading, U.K. 1978. Also available as Report No. RL-78–, Technology Division, Science Research Council, Rutherford Laboratory, Chilton, Didcot, Oxfordshire, U.K. (1978).
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.