On the applicability of the heat and mass transfer analogy in indoor air flows.

*(English)*Zbl 1157.80368Summary: The heat and mass transfer analogy is used in building simulation to convert heat transfer coefficients into mass transfer coefficients. The analogy is valid under strict conditions. In this paper CFD is used to investigate the accuracy of the analogy for indoor air flows when not all these conditions are met. CFD simulations confirm the possibility of applying the analogy to indoor air flows and show that when not all conditions are met, the average mass transfer coefficients remain well predicted by the analogy while the prediction of local transfer coefficients can result in large errors.

##### MSC:

80A20 | Heat and mass transfer, heat flow (MSC2010) |

76R05 | Forced convection |

76B07 | Free-surface potential flows for incompressible inviscid fluids |

PDF
BibTeX
XML
Cite

\textit{H. J. Steeman} et al., Int. J. Heat Mass Transfer 52, No. 5--6, 1431--1442 (2009; Zbl 1157.80368)

Full Text:
DOI

**OpenURL**

##### References:

[1] | Simonson, C. J.; Salonvaara, M.; Ojanen, T.: The effect of structures on indoor humidity - possibility to improve comfort and perceived air quality, Indoor air 12, No. 4, 243-251 (2002) |

[2] | Kunzel, H. M.; Holm, A.; Zirkelbach, D.; Karagiozis, A. N.: Simulation of indoor temperature and humidity conditions including hygrothermal interactions with the building envelope, Solar energy 78, No. 4, 554-561 (2005) |

[3] | Karagiozis, A.; Salonvaara, M.: Hygrothermal system-performance of a whole building, Building and environment 36, No. 6, 779-787 (2001) |

[4] | EN15026: Hygrothermal performance of building components and building elements – Assessment of moisture transfer by numerical simulation. |

[5] | Kaya, A.; Aydin, O.; Dincer, I.: Numerical modeling of heat and mass transfer during forced convection drying of rectangular moist objects, International journal of heat and mass transfer 49, No. 17 – 18, 3094-3103 (2006) · Zbl 1189.76489 |

[6] | Colburn, A. P.: A method of correlating forced convection heat transfer data and a comparison with fluid friction, Transactions of the American institute of chemical engineers 29, 174-210 (1933) |

[7] | Welty, J.; Wicks, C.; Wilson, R.; Rorrer, G.: Fundamentals of momentum, heat and mass transfer, (2001) |

[8] | Chilton, T. H.; Colburn, A. P.: Mass transfer (absorption) coefficients prediction from data on heat transfer and fluid friction, Industrial and engineering chemistry 26, 1183-1187 (1934) |

[9] | Lewis, J. S.: Heat transfer predictions drom mass transfer measurements around a single cylinder in cross flow, International journal of heat and mass transfer 14, 325-329 (1971) |

[10] | Bottemanne, F. A.: Experimental results of pure and simultaneous heat and mass-transfer by free convection about a vertical cylinder for pr=0.71 and sc=0.63, Applied scientific research 25, No. 5, 372-382 (1972) |

[11] | Bedingfield, C. H.; Drew, T. B.: Analogy between heat transfer and mass transfer: a psychometric study, Industrial and engineering chemistry 42, No. 6, 1164-1173 (1950) |

[12] | A.J.N. Khalifa, Heat Transfer Processes in Buildings, Ph.D. Thesis, University of Wales College of Cardiff, Cardiff, 1989. |

[13] | Awbi, H. B.: Calculation of convective heat transfer coefficients of room surfaces for natural convection, Energy and buildings 28, No. 2, 219-227 (1998) |

[14] | Masmoudi, W.; Prat, M.: Heat and mass-transfer between a porous-medium and a parallel external flow – application to drying of capillary porous materials, International journal of heat and mass transfer 34, No. 8, 1975-1989 (1991) |

[15] | Tian, Y. S.; Karayiannis, T. G.: Low turbulence natural convection in an air cavity filled square cavity – part I: The thermal and fluid flow fields, International journal of heat and mass transfer 43, No. 6, 849-866 (2000) · Zbl 1065.76511 |

[16] | C. Beghein, F. Penot, S. Mergui, F. Allard, Numerical and experimental evaluation of turbulent models for natural convection simulation in a thermally driven square cavity, in: ASME Conference WA/HT-46, 1993, pp. 1 – 12. |

[17] | H.-J. Steeman, A. Janssens, J. Carmeliet, M. De Paepe, Modelling indoor air and hygrothermal wall interaction in building simulation: comparison between CFD and a well-mixed zonal model, Building and Environment, in press 10.1016/j.buildenv.2008.05.002. |

This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. It attempts to reflect the references listed in the original paper as accurately as possible without claiming the completeness or perfect precision of the matching.