×

A review of presentations and discussions of the workshop computational mechanics of generalized continua and applications to materials with microstructure that was held in Catania 29-31 October 2015. (English) Zbl 1391.74006

Summary: A report on the workshop Computational mechanics of generalized continua and applications to materials with microstructure (Catania 29-31 October 2015) is provided. The constructive atmosphere that was present at the workshop in 2012 and the Euromech Colloquium in 2014, both in Cisterna di Latina, was repeated for this workshop in Catania. The objective of this meeting was to bring together experts within the CNRS International Associate Laboratory (LIA) Francois Cosserat-Tullio Levi Civita Coss & Vita in order to discuss topics of common interest. Particularly, the workshop was dedicated to the following projects of LIA: (i) computational mechanics of generalized continua; and (ii) nonlinearity and stability in continuous media. Also subjects related to the application of generalized continua to multiscale and smart materials were discussed. Approximately 25 Coss & Vita LIA members and other experts (mostly from France and Italy) gathered together, including PhD students and those students from the Scuola Superiore di Catania.

MSC:

74-06 Proceedings, conferences, collections, etc. pertaining to mechanics of deformable solids
74-02 Research exposition (monographs, survey articles) pertaining to mechanics of deformable solids
00B25 Proceedings of conferences of miscellaneous specific interest

Software:

SyFi; FEniCS
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] [1] dell’Isola, F, Forest, S. Second gradient and generalized continua. A workshop held on 12-16 March 2012 in Cisterna di Latina. ZAMM 2014; 94(5): 367-372.
[2] [2] Placidi, L, Giorgio, I, Della Corte, A. Generalized continua and their applications to the design of composites and metamaterials: A review of presentations and discussions. Math Mech Solids. Epub ahead print 1April2015. doi:10.1177/1081286515576948 · Zbl 1370.74007
[3] [3] Eremeyev, VA, Lebedev, LP, Altenbach, H. Foundations of micropolar mechanics. Berlin and Heidelberg: Verlag Berlin Heidelberg: Springer, 2013. · Zbl 1257.74002
[4] [4] Bertram, A. The mechanics and thermodynamics of finite gradient elasticity and plasticity. Preprint, Otto-von-Guericke University Magdeburg, Germany, 2013.
[5] [5] Javili, A, McBride, A, Steinmann, P. Thermomechanics of solids with lower-dimensional energetics: On the importance of surface, interface, and curve structures at the nanoscale. A unifying review. Appl Mech Rev 2013; 65(1): 010802-1-010802-31.
[6] [6] Lakes, R. Experimental methods for study of Cosserat elastic solids and other generalized elastic continua. In: Mühlhaus, H, Wiley, J (ed.) Continuum models for materials with micro-structure, Ch. 1. New York, 1995, 1-22. · Zbl 0900.73005
[7] [7] Liebold, C, Mühlhaus, WH. Strain maps on statically bend (001) silicon microbeams using AFM-integrated Raman spectroscopy. Arch Appl Mech 2015; 85(9-10): 1353-1362.
[8] [8] Liebold, C, Müller, WH. Comparison of gradient elasticity models for the bending of micromaterials. Comput Mater Sci 2016; 116: 52-61.
[9] [9] Liebold, C, Müller, WH. Are microcontinuum field theories of elasticity amenable to experiments? A review of some recent results. Springer Proc Math Stat 2015; 137: 255-278. · Zbl 1354.74017
[10] [10] Lam, DCC, Yang, F, Chong, CM. Experiments and theory in strain gradient elasticity. J Mech Phys Solids 2003; 51: 1477-1508. · Zbl 1077.74517
[11] [11] Abali, BE, Wu, CC, Müller, WH. An energy-based method to determine material constants in nonlinear rheology with applications. Contin Mech Thermodyn. Epub ahead of print 27August2015. DOI: 10.1007/s00161-015-0472-z.
[12] [12] Logg, A, Mardal, KA, Wells, GN. Automated solution of differential equations by the finite element method, the FEniCS book. In: Lecture notes in computational science and engineering. Volume 84. Berlin: Springer, 2011. · Zbl 1247.65105
[13] [13] Abali, BE, Müller, WH, Eremeyev, VA.“Strain gradient elasticity with geometric nonlinearities and its computational evaluation.”Mech Adv Mater Struc Mod Proc 2015; 1-11.
[14] [14] Placidi, L, Andreaus, U, Corte, AD. Gedanken experiments for the determination of two-dimensional linear second gradient elasticity coefficients. ZAMP 2015; 66(6): 3699-3725. · Zbl 1386.74018
[15] [15] Placidi, L, El Dhaba, AR. Semi-inverse method à la Saint-Venant for two-dimensional linear isotropic homogeneous second gradient elasticity. Math Mech Solids Epub ahead of print 17December2015. doi:10.1177/1081286515616043. · Zbl 1371.74105
[16] [16] Godio, M, Stefanou, I, Sab, K. Dynamic finite element formulation for Cosserat elastic plates. Int J Numer Methods Eng 2015; 101(13): 992-1018. · Zbl 1352.74005
[17] [17] Godio, M, Stefanou, I, Sab, K. Cosserat elastoplastic finite elements for masonry structures. Key Eng Mater 2015; 624: 131-138.
[18] [18] Stefanou, I, Sulem, J, Vardoulakis, I. Three-dimensional Cosserat homogenization of masonry structures: Elasticity. Acta Geotech 2008; 3(1): 71-83.
[19] [19] Yvonnet, J, Bonnet, G. A consistent nonlocal scheme based on filters for the homogenization of heterogeneous linear materials with non-separated scales. Int J Solids Struct 2014; 51: 196-209.
[20] [20] Eringen, AC. On nonlocal elasticity. Int J Eng Sci 1972; 10: 233-248. · Zbl 0247.73005
[21] [21] Yvonnet, J, Bonnet, G. Nonlocal/coarse graining homogenization of linear elastic media with non-separated scales using least-square polynomial filters. Int J Multiscale Comput Eng 2014; 12(5): 375-395.
[22] [22] Tran, VP, Guilleminot, J, Brisard, S. Stochastic modeling of mesoscopic elasticity random field. Mechanics Mater 2016; 93: 1-12.
[23] [23] Forest, S, Sab, K. Stress gradient continuum theory. Mech Res Commun 2012; 40: 16-25.
[24] [24] Sab, K, Legoll, F, Forest, S. Stress gradient elasticity theory: Existence and uniqueness of solution. J Elast 2016; 123(2): 179-201. · Zbl 1339.35314
[25] [25] Papargyri-Beskou, S, Giannakopoulos, AE, Beskos, DE. Static analysis of gradient elastic bars, beams, plates and shells. TOMECHJ 2010; 4: 65-73. · Zbl 1196.74093
[26] [26] Niiranen, J, Khakalo, S, Balobanov, V, Niemi, AH. Variational formulation and isogeometric analysis for fourth-order boundary value problems of gradient-elastic bar and plane strain/stress problems. Computer Methods in Applied Mechanics and Engineering. Epub ahead of print 25May2016. · Zbl 1439.74036
[27] [27] Fischer, P, Klassen, M, Mergheim, J. Isogeometric analysis of 2D gradient elasticity. Comput Mech 2011; 47: 325-334. · Zbl 1398.74329
[28] [28] Beirão, Da, Veiga, L, Hughes, TJR, Kiendl, J. A locking-free model for Reissner-Mindlin plates: Analysis and isogeometric implementation via NURBS and triangular NURPS, Mathematical Models and Methods in Applied Sciences 2015; 25(8): 1519-1551. · Zbl 1321.74065
[29] [29] Greco, L, Cuomo, M. An implicit G1 multi patch B-spline interpolation for Kirchhoff-Love space rod. Comp Methods Appl Mech Eng 2014; 269: 173-197. · Zbl 1296.74049
[30] [30] Greco, L, Cuomo, M. An isogeometric implicit G1 mixed finite element for Kirchhoff space rods. Comp Methods Appl Mech Eng 2016; 298: 325-349. · Zbl 1425.74259
[31] [31] Greco, L, Cuomo, M. B-Spline interpolation of Kirchhoff-Love space rods. Comp Methods Appl Mech Eng 2013; 256: 251-269. · Zbl 1352.74153
[32] [32] Reda, H, Rahali, Y, Ganghoffer, JF. Wave propagation in 3D viscoelastic auxetic and textile materials by homogenized continuum micropolar models. Compos Struct 2016; 141: 328-345.
[33] [33] Rahali, Y, Goda, I, Ganghoffer, JF. Numerical identification of classical and nonclassical moduli of 3D woven textiles and analysis of scale effects. Comp Struct 2016; 135: 122-139.
[34] [34] Rahali, Y, Giorgio, I, Ganghoffer, JF. Homogenization à la Piola produces second gradient continuum models for linear pantographic lattices. Int J Eng Sci 2015; 97: 148-172. · Zbl 1423.74794
[35] [35] dell’Isola, F, Andreaus, U, Placidi, L. At the origins and in the vanguard of peridynamics, non-local and higher-gradient continuum mechanics: An underestimated and still topical contribution of Gabrio Piola. Math Mech Solids 2015; 20(8): 887-928. · Zbl 1330.74006
[36] [36] dell’Isola, F, d’Agostino, MV, Madeo, A. Minimization of shear energy in two dimensional continua with two orthogonal families of inextensible fibers: The case of standard bias extension test. J Elast 2016; 122(2): 131-155. · Zbl 1330.74024
[37] [37] dell’Isola, F, Steigmann, D. A two-dimensional gradient-elasticity theory for woven fabrics. J Elast 2015; 118(1): 113-125. · Zbl 1305.74024
[38] [38] Greco, L, Impollonia, N, Cuomo, M. A procedure for the static analysis of cable structures following elastic catenary theory. Int J Solid Struct 2014; 51(7-8): 1521-1533.
[39] [39] d’Agostino, MV, Giorgio, I, Greco, L. Continuum and discrete models for structures including (quasi-) inextensible elasticae with a view to the design and modeling of composite reinforcements. Int J Solids Struct 2015; 59: 1-17.
[40] [40] dell’Isola, F, Della Corte, A, Greco, L. Plane bias extension test for a continuum with two inextensible families of fibers: A variational treatment with Lagrange multipliers and a perturbation solution. Int J Solids Struct 2015. doi: 10.1016/j.ijsolstr.2015.08.029.
[41] [41] dell’Isola, F, Lekszycki, T, Pawlikowski, M. Designing a light fabric metamaterial being highly macroscopically tough under directional extension: first experimental evidence. Z Angew Math Phys 2015; 66(6): 3473-3498. · Zbl 1395.74002
[42] [42] Ciancio, D, Carol, I, Cuomo, M. Crack opening conditions at “corners nodes” in FE analysis with cracking along the mesh lines. Eng Fract Mech 2007; 74(13): 1963-1982.
[43] [43] Piola, G . The complete works of Gabrio Piola: Volume {I} - commented English translation. In: dell’Isola, F, Maier, G, Perego, U. (eds) Advanced structured materials. Switzerland: Springer International Publishing, 2014.
[44] [44] Harrison, P, Wiggers, J, Long, AC. Normalisation of shear test data for rate-independent compressible fabrics. J Compos Mater 2008; 42(22): 2315-2344.
[45] [45] Ferretti, M, Madeo, A, dell’Isola, F. Modeling the onset of shear boundary layers in fibrous composite reinforcements by second-gradient theory. Z Angew Math Phys 2014; 65(3): 587-612. · Zbl 1302.74008
[46] [46] Harrison, P, Härtel, F. Correction of “Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics”. Compos Part A Appl Sci Manuf 2015; submitted.
[47] [47] Härtel, F, Harrison, P. Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics. Compos Part A Appl Sci Manuf 2014; 37(61-69): 309-326.
[48] [48] Misra, A, Poorsolhjouy, P. Granular micromechanics based micromorphic model predicts frequency band gaps. Continuum Mech Thermodyn 2016; 28(1-2): 215-234. · Zbl 1348.74271
[49] [49] Misra, A, Singh, V. Thermomechanics based nonlinear rate-dependent coupled damage-plasticity granular micromechanics model. Continuum Mech Thermodyn 2014; 27(4-5): 787-817. · Zbl 1341.74048
[50] [50] Misra, A, Poorsolhjouy, P. Granular micromechanics model for damage and plasticity of cementitious materials based upon thermomechanics. Math Mech Solids. Epub ahead of print 24March2015. DOI: 10.1177/1081286515576821. · Zbl 07259257
[51] [51] de Boer, R . Theoretical poroelasticity - a new approach. Chaos Solit Fract 2015; 25: 861-878. · Zbl 1071.74019
[52] [52] Misra, A, Poorsolhjouy, P. Identification of higher-order elastic constants for grain assemblies based upon granular micromechanics. MEMOCS 2015; 3(3): 285-308. · Zbl 1329.74225
[53] [53] Misra, A, Poorsolhjouy, P. Elastic behavior of 2D grain packing modeled as micromorphic media based upon granular micromechanics. J Eng Mech. Epub ahead of print 14January2016. DOI: 10.1061/(ASCE)EM.1943-7889.0001060. · Zbl 1329.74225
[54] [54] Stefanou, I, Sulem, J. Chemically induced compaction bands: Triggering conditions and band thickness. J Geophys Res: Solid Earth 2014; 119(2), 880-899.
[55] [55] Rice, JR. On the stability of dilatant hardening for saturated rock masses. J Geophys Res 1975; 80(11): 1531-1536.
[56] [56] Vardoulakis, I. Dynamic stability analysis of undrained simple shear on water-saturated granular soils. Int J Rock Mech Mining Sci Geomech Abs 1986; 23(5): 183. · Zbl 0579.73109
[57] [57] Sulem, J. Bifurcation theory and localization phenomena. European Journal of Environmental and Civil Engineering 2010; 14(8-9): 989-1009.
[58] [58] Sulem, J, Stefanou, I, Veveakis, E. Stability analysis of undrained adiabatic shearing of a rock layer with Cosserat microstructure. Granular Matter 2011; 13(3): 261-268.
[59] [59] Veveakis, E, Sulem, J, Stefanou, I. Modeling of fault gouges with Cosserat continuum mechanics: Influence of thermal pressurization and chemical decomposition as coseismic weakening mechanisms. J Struct Geo 2012; 38: 254-264.
[60] [60] Veveakis, E, Stefanou, I, Sulem, J. Failure in shear bands for granular materials: Thermo-hydro-chemo-mechanical effects. Géotechnique Letters 2013; 3(2): 31-36.
[61] [61] Al Shaer, A, Duhamel, D, Sab, K. Experimental settlement and dynamic behavior of a portion of ballasted railway track under high speed trains. J Sound Vib 2008; 316(1-5): 211-233.
[62] [62] Jehel, P, Cottereau, R. On damping created by heterogeneous yielding in the numerical analysis of nonlinear reinforced concrete frame elements. Comput Struct 2015; 154: 192-203.
[63] [63] Le Guennec, Y, Cottereau, R, Clouteau, D. A coupling method for stochastic continuum models at different scales. Probabilist Eng Mech 2014; 37: 138-147.
[64] [64] Bedford, A, Drumheller, DS. Theories of immiscible and structured mixtures. Int J Eng Sci 1983; 21(8): 863-960. · Zbl 0534.76105
[65] [65] dell’Isola, F, Madeo, A, Seppecher, P. Boundary conditions at fluid-permeable interfaces in porous media: A variational approach. Int J Solids Struct 2009; 46(17): 3150-3164. · Zbl 1167.74393
[66] [66] Serpieri, R, Rosati, L. Formulation of a finite deformation model for the dynamic response of open cell biphasic media. J Mech Phys Solids 2011; 59: 841-862. · Zbl 1270.74063
[67] [67] Serpieri, R, Travascio, F. General quantitative analysis of stress partitioning and boundary conditions in undrained biphasic porous media via a purely macroscopic and purely variational approach. Continuum Mech Thermodyn 2016; 28(1-2): 235-261. · Zbl 1348.74103
[68] [68] Serpieri, R, Travascio, F, Asfour, S. Variationally consistent derivation of the stress partitioning law in saturated porous media. Int J Solids Struct 2015; 56: 235-247.
[69] [69] Lu, Y, Lekszycki, T. Modeling of an initial stage of bone fracture healing. Continuum Mech Thermodyn 2015; 27(4-5): 851-859. · Zbl 1341.74124
[70] [70] Andreaus, U, Giorgio, I, Lekszycki, T. A 2D continuum model of a mixture of bone tissue and bio-resorbable material for simulating mass density redistribution under load slowly variable in time. ZAMM 2014; 94(12): 978-1000. · Zbl 1303.74029
[71] [71] Lekszycki, T, Dell’Isola, F. A mixture model with evolving mass densities for describing synthesis and resorption phenomena in bones reconstructed with bio-resorbable materials. ZAMM 2012; 92(6): 426-444. · Zbl 1241.92010
[72] [72] Federico, S, Grillo, A. Elasticity and permeability of porous fibre-reinforced materials in large deformations. Mech Mater 2012; 44: 58-71.
[73] [73] Grillo, A, Federico, S, Wittum, G. Growth, mass transfer, and remodeling in fiber-reinforced, multi-constituent materials. Int J Nonlin Mech 2012; 47(2): 388-401.
[74] [74] Grillo, A, Wittum, G, Tomic, A. Remodelling in statistically oriented fibre-reinforced materials and biological tissues. Math Mech Solids 2015; 20(9): 1107-1129. · Zbl 1329.74193
[75] [75] Grillo, A, Prohl, R, Wittum, G. A poroplastic model of structural reorganisation in porous media of biomechanical interest. Continuum Mech Thermodyn 2016; 28(1-2): 579-601. · Zbl 1348.74097
[76] [76] Eremeyev, VA, Rosi, G, Naili, S. Surface/interfacial anti-plane waves in solids with surface energy. Mechanics Research Communications 2016; 74: 8-13.
[77] [77] Lüders, W. Über die ausserung der elasticitat an stahlartigen eisenstaben und stahlstabe, und über eine beim biegen solcher stabe beobachtete molecularbewegung. Dinglers Polytech 1860; J5: 18-22.
[78] [78] Maziere, M, Forest, S. Strain gradient plasticity modeling and finite element simulation of lüders band formation and propagation. Continuum Mech Thermodyn 2015; 27(1-2): 83-104. · Zbl 1341.74153
[79] [79] Marais, A, Maziere, M, Forest, S. Identification of a strain-aging model accounting for Lüders behavior in a C-Mn steel. Philosophical Magazine 2012; 92(28-30): 3589-3617.
[80] [80] Marais, A, Maziere, M, Forest, S. Influence of static strain aging on the cleavage fracture of a C-Mn steel. Eng Fract Mech 2015; 141: 95-110.
[81] [81] Rice, JR. The localization of plastic deformation. Division of Engineering, Brown University, 1976. · Zbl 0368.73036
[82] [82] Altenbach, H, Eremeyev, VA, Naumenko, K. On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer. ZAMM 2015; 95: 1004-1011. · Zbl 1330.74102
[83] [83] Eisenträger, J, Naumenko, K, Altenbach, H. Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels. Int J Mech Sci 2015; 96:163-171.
[84] [84] Naumenko, K, Eremeyev, VA. A layer-wise theory for laminated glass and photovoltaic panels. Composite Struct 2014; 112: 283-291.
[85] [85] Eitner, U, Kajari-Schroeder, S, Koentges, M. Thermal stress and strain of solar cells in photovoltaic modules. In: Altenbach, H, Eremeyev, VA (eds) Adv Struct Mat 2011; 15: 453-468.
[86] [86] Camiola, VD, Romano, V. Hydrodynamical Model for Charge Transport in Graphene. J Stat Phys 2014; 157: 1114-1137. · Zbl 1310.82052
[87] [87] Romano, V, Majorana, A, Coco, M. DSMC method consistent with the Pauli exclusion principle and comparison with deterministic solutions for charge transport in graphene. J Comp Phys 2015; 302: 267-284. · Zbl 1349.82114
[88] [88] Cuomo, M, Contrafatto, L, Greco, L. A variational model based on isogeometric interpolation for the analysis of cracked bodies. Int J Eng Sci80: 173-188. · Zbl 1423.74055
[89] [89] Greco, L, Cuomo, M. Consistent tangent operator for an exact Kirchhoff rod model. Continuum Mech Thermodyn 2015; 27(4): 861-877. · Zbl 1341.74096
[90] [90] Cecchi, A, Rizzi, NL.“Heterogeneous elastic solids: a mixed homogenization-rigidification technique.”Int J Solids Struct 2001; 38(1): 29-36. · Zbl 0993.74054
[91] [91] Rizzi, NL, Varano, V. The effects of warping on the postbuckling behaviour of thin-walled structures. Thin Wall Struct 2011; 49(9): 1091-1097.
[92] [92] Ruta, GC, Varano, V, Pignataro, M. A beam model for the flexural– torsional buckling of thin-walled members with some applications. Thin Wall Struct 2008; 46(7): 816-822.
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.